BY229

BY229 PHILIPS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Philips Semiconductors Product specification Rectifier diodes BY229 series fast, soft-recovery FEATURES SYMBOL QUICK REFERENCE DATA

• Low forward volt drop V R = 200 V/ 400 V/ 600 V/800 V
• Fast switching
• Soft recovery characteristic I F(AV) = 8 A
• High thermal cycling performance
• Low thermal resistance I FSM ≤ 60 A trr ≤ 135 ns GENERAL DESCRIPTION PINNING SOD59 (TO220AC) Glass-passivated double diffused PIN DESCRIPTION rectifier diodes featuring low forward voltage drop, fast reverse 1 cathode recovery and soft recovery characteristic. The devices are 2 anode intended for use in TV receivers, monitors and switched mode power tab cathode supplies. The BY229 series is supplied in the conventional leaded SOD59 (TO220AC) package. LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT BY229 -200 -400 -600 -800 VRSM Peak non-repetitive reverse - 200 400 600 800 V voltage V RRM Peak repetitive reverse voltage - 200 400 600 800 V VRWM Crest working reverse voltage - 150 300 500 600 V VR Continuous reverse voltage - 150 300 500 600 V IF(AV) Average forward current1 square wave; - 8 A δ = 0.5; Tmb ≤ 122 ˚C sinusoidal; - 7 A a = 1.57; Tmb ≤ 125 ˚C IF(RMS) RMS forward current - 11 A IFRM Repetitive peak forward current t = 25 µs; δ = 0.5; - 16 A Tmb ≤ 122 ˚C IFSM Non-repetitive peak forward t = 10 ms - 60 A current. t = 8.3 ms - 66 A sinusoidal; T j = 150 ˚C prior to surge; with reapplied VRWM(max) I2tI 2t for fusing t = 10 ms - 18 A 2s Tstg Storage temperature -40 150 ˚C Tj Operating junction temperature - 150 ˚C k a tab 1 Neglecting switching and reverse current losses. September 1998 1 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes BY229 series fast, soft-recovery THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT R th j-mb Thermal resistance junction to - - 2.0 K/W mounting base R th j-a Thermal resistance junction to in free air. - 60 - K/W ambient STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT V F Forward voltage I F = 20 A - 1.5 1.85 V IR Reverse current V R = VRWM ; Tj = 125 ˚C - 0.1 0.4 mA DYNAMIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT t rr Reverse recovery time I F = 1 A; VR > 30 V; -dIF/dt = 50 A/µs - 100 135 ns Q s Reverse recovery charge I F = 2 A; VR > 30 V; -dIF/dt = 20 A/µs - 0.5 0.7 µC dIR /dt Maximum slope of the reverse I F = 2 A; -dIF/dt = 20 A/µs - 50 60 A/ µs recovery current September 1998 2 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes BY229 series fast, soft-recovery Fig.1. Definition of trr, Qs and Irrm Fig.2. Maximum forward dissipation, PF = f(IF(AV)); square wave current waveform; parameter D = duty cycle = tp/T. Fig.3. Maximum forward dissipation, PF = f(IF(AV)); sinusoidal current waveform; parameter a = form factor = IF(RMS) /IF(AV). Fig.4. Maximum non-repetitive rms forward current. IF = f(tp); sinusoidal current waveform; Tj = 150˚C prior to surge with reapplied VRWM . Fig.5. Typical and maximum forward characteristic; IF = f(VF); parameter Tj Fig.6. Maximum Qs at Tj = 25˚C and 150˚C 100% time dI dt F I R IF I rrm trr 25%Qs 1ms 10ms 0.1s 1s 10s tp / s IFS(RMS) / A BY229 IFSM 0 1 BY229F VF / V IF / A 20.5 1.5 maxtyp Tj = 150 C Tj = 25 C 0 2 4 6 8 10 12 BY329 IF(AV) / A PF / W20 Tmb(max) / C 150 110 120 130 140 0.5 0.2 0.1 D = 1.0 D = tp tp T T I t Vo = 1.25 V Rs = 0.03 Ohms 1 100 BY329 -dIF/dt (A/us) Qs / uC10 0.1 10 2 A IF = 10 A 10 A 1 A 1 A 2 A Tj = 150 C Tj = 25 C 0 2 4 6 8 BY329 IF(AV) / A PF / W15 2.8 2.2 1.9 a = 1.57 Tmb(max) / C 150 120 130 140 Vo = 1.25 V Rs = 0.03 Ohms September 1998 3 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes BY229 series fast, soft-recovery Fig.7. Maximum trr measured to 25% of Irrm; Tj = 25˚C and 150˚C Fig.8. Typical junction capacitance Cd at f = 1 MHz; Tj = 25˚C Fig.9. Transient thermal impedance Zth = f(tp) 1 10 100 BY329 -dIF/dt (A/us) trr / ns1000 100 1 A IF = 10 A Tj = 150 C Tj = 25 C 10A 1us 10us 100us 1ms 10ms 100ms 1s 10s0.001 0.01 0.1 BY229pulse width, tp (s) Transient thermal impedance, Zth j-mb (K/W) D = tp tp T TP t D 1 100 100 1 10 1000 BY329Cd / pF VR / V September 1998 4 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes BY229 series fast, soft-recovery MECHANICAL DATA Dimensions in mm Net Mass: 2 g Fig.10. SOD59 (TO220AC). pin 1 connected to mounting base. Notes 1. Refer to mounting instructions for TO220 envelopes. 2. Epoxy meets UL94 V0 at 1/8". 10,3 max 3,7 2,8 3,0 3,0 max not tinned 1,3 max (2x) 2,4 0,6 4,5 max 5,9 min 15,8 max 1,3 0,9 max (2x) 13,5 min 5,08 September 1998 5 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes BY229 series fast, soft-recovery DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.  Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1998 6 Rev 1.200