BY214-400 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
August 1998 - Ed: 1A RECTIFIER DIODES STANDARD RECTIFIER HIGH SURGE CURRENT CAPABILITY LOW FORWARD VOLTAGE DROP Symbol Parameter Value Unit IF(AV) Average forward current * Ta=90°C6 A IFSM Surge non repetitive forward current tp=10ms sinusoidal 400 A Ptot Power dissipation* Ta=90°C6 W Tstg Tj Storage and junction temperature range - 65 to + 150 °C TL Maximum lead temperaturefor solderingduring 10s at 4mm from case 230 °C * Single phase, half wave, resistive or inductive load. ABSOLUTE RATINGS (limiting values) Symbol Parameter Value Unit Rth (j-a)Junction ambient * 10 °C/W * On infinite heatsink with 10mm lead lenght THERMAL RESISTANCE Symbol Parameter BY214- Unit 400 600 800 1000 VRRM Repetitive peak reverse voltage 400 600 800 1000 V AG (Plastic) IF(av) 6A VRRM 1000 V VF (max) 1.2 V MAIN PRODUCTS CHARACTERISTICS
AG (Plastic) Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsIbility for the consequences of use of such information nor for any infringement of patents or other rights of thirdparties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written ap- proval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 1998 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. note 2 BA B C note 1note 1 D D O/ O/ L1 L1 REF. DIMENSIONS NOTESMillimeters Inches Min. Max. Min. Max. A 9 0.354 1- The lead is not controlledwithin zone L1. 2- The minimum axial length within which the device may be placed bent at right angles is 0.79” (20 mm). B 20 0.787 ∅ C 8 0.315 ∅ D 1.35 1.45 0.053 0.057 L1 1.27 0.050 Marking : Type number Weight : 2.16 g Symbol Test Conditions Min. Typ. Max. Unit VF* T j=2 5°CI F =2 0A 1.2 V IR ** Tj= 100°CV R =V RRM 250 µA Pulse test : * tp = 380µs, duty cycle < 2 % ** tp = 5 ms, duty cycle < 2 %