BXHF1062 APITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Pout @ 1 dB Compression Input VSWR Output VSWR 3rd Order Output Intercept Point 2nd Order Output Intercept Point Noise Figure Supply Voltage Supply Current Revision: 12/11/2013 Housing Size RF Connectors Operating Case Temp. (Min./Max. Values)
6 GHz to 10 GHz
+19 dBm 1.5:1 1.5:1 +31 dBm +41 dBm 6.5 dB +5 volts 120 mA +18 dBm 2.0:1 Max. 2.0:1 Max. 7.5 dB +5 volts 140 mA Max. Typical values are measured at 25 °C but not guaranteed. 1.060” L x 0.870 ” W x 0.360” H Gold Plated Pins or SMA Female -20°C to +70°C The Model BXHF1062 is standard high frequency amplifi er covering 6 GHz to 10 GHz. This two stage design, utilizes input RF surge protection to protect against power fl uctuations on incoming signal, reverse bias protection circuitry, and a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL- STD-883 version as a model SXHF1062. All specifi cation ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Storage Temperature Operating Temperature (Case) DC Voltage @ 25°C Input Drive @ 25°C (CW)
FEATURES
- Output Power @ 1dB Comp.: +19 dBm
- Reverse Bias Protection
- Laser Sealed Housing
- Input RF Surge Protection Microwave Amplifi er
Parameter Typical Min. / Max. Maximum (No Damage) Ratings -65°C to +125°C -40°C to +85°C +7 VDC +20 dBm
Microwave Amplifi er Outline Drawing (HF2 Package)