BXEB-L0280Z-27G1000-C-C3

DS132 BRIDGELUX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 17

Technical content

Datasheet sections

EB Series™ Gen 3 Product Data Sheet DS132

EB Series Gen 3 linear modules are designed for use in premium indoor applications where a high efficacy is required. The new generation uses the high-efficacy SMDs to achieve over 200lm/W, which enables designers and fixture manufacturers to meet DLC Premium requirements. They are designed for linear troffers, pendants and other luminaires in indoor commercial applications. Available in 280 mm, 560 mm, and 1120 mm lengths, the modules can be connected end-to-end thereby providing flexibility in designing luminaires. The Zhaga compatible modules further simplify design by providing easy mounting options, reusable poke-in connectors and by being compatible with a variety of off-the-shelf optics. The modules have long lifetimes of greater than 50,000 hours. EB Series™

Features

• High efficacy of up to 200 lm/W (nominal)
• Now available in both 80 CRI and 90 CRI
• Available in a variety of color temperatures from 2700K to 5700K
• Wide lumen range with 2x overdrive capability
• Designed following Zhaga standards L28W2 and L56W2 Benefits
• Achieve over 200 lm/W by under-driving
• Long lifetime (L80, B50 > 50,000 hours)
• Heat-sinking may not be required at low drive cur- rents
• Reliable use at elevated currents for greater design flexibility
• Easy installation using mounting holes and poke-in connectors

Bridgelux EB Series Gen 3 modules are fully engineered devices that provide consistent thermal and optical performance on an engineered mechanical platform. The linear products incorporate several features to simplify design integration and assembly. Please visit www.bridgelux.com for more information on the EB Series family of products. Product Nomenclature The part number designation for Bridgelux EB Series Gen 3 is explained as follows: Nominal CCT 27 = 2700 K 30 = 3000 K 35 = 3500 K 40 = 4000 K 50 = 5000 K 57 = 5700 K 1 2 3 4 - 5 6 7 8 9 10 - 11 12 13 14 15 16 - 17 – 18 BXEB L0280Z 1000 C3C Product Family Module Version C = Gen 3 3 = 3 SDCM Flux Indicator 1000 = 1000 lm 2000 = 2000 lm 4000 = 4000 lm Module Configuration Nominal Dimensions L= Linear 0280 = 280 mm 0560 = 560 mm 1120 = 1120 mm Z= Zhaga compatible width (24 mm) 30 E Minimum CRI E = 80 G = 90 – – – – Zhaga compatible mounting holes Re-usable connector Designed to comply with global safety standards for creepage and clearance distances Label containing part number and lot codes is attached on the front of the module where shown Multiple case temperature measurement points

Table 1: Product Performance (Tc = 25° C) Part Number Nominal CCT1 (K) Min CRI Typical Flux2,3 Tc = 25º C (lm) Nominal Drive Current (mA) Typical Vf (V) Typical Power (W) Typical Efficacy (lm/W) BXEB-L0280Z-27E1000-C-C3 2700 80 1190 350 19.1 6.7 178 BXEB-L0280Z-27G1000-C-C3 90 1045 156 BXEB-L0280Z-30E1000-C-C3 3000 80 1250 187 BXEB-L0280Z-30G1000-C-C3 90 1100 164 BXEB-L0280Z-35E1000-C-C3 3500 80 1250 187 BXEB-L0280Z-35G1000-C-C3 90 1100 164 BXEB-L0280Z-40E1000-C-C3 4000 80 1340 200 BXEB-L0280Z-40G1000-C-C3 90 1100 164 BXEB-L0280Z-50E1000-C-C3 5000 80 1340 200 BXEB-L0280Z-50G1000-C-C3 90 1100 164 BXEB-L0280Z-57E1000-C-C3 5700 80 1340 200 BXEB-L0280Z-57G1000-C-C3 90 1100 164 BXEB-L0560Z-27E2000-C-C3 2700 80 2380 700 19.1 13.4 178 BXEB-L0560Z-27G2000-C-C3 90 2085 156 BXEB-L0560Z-30E2000-C-C3 3000 80 2490 186 BXEB-L0560Z-30G2000-C-C3 90 2195 164 BXEB-L0560Z-35E2000-C-C3 3500 80 2490 186 BXEB-L0560Z-35G2000-C-C3 90 2195 164 BXEB-L0560Z-40E2000-C-C3 4000 80 2675 200 BXEB-L0560Z-40G2000-C-C3 90 2195 164 BXEB-L0560Z-50E2000-C-C3 5000 80 2675 200 BXEB-L0560Z-50G2000-C-C3 90 2195 164 BXEB-L0560Z-57E2000-C-C3 5700 80 2675 200 BXEB-L0560Z-57G2000-C-C3 90 2195 164 BXEB-L1120Z-27E4000-C-C3 2700 80 4760 700 38.3 26.8 178 BXEB-L1120Z-27G4000-C-C3 90 4160 155 BXEB-L1120Z-30E4000-C-C3 3000 80 4980 186 BXEB-L1120Z-30G4000-C-C3 90 4390 164 BXEB-L1120Z-35E4000-C-C3 3500 80 4980 186 BXEB-L1120Z-35G4000-C-C3 90 4390 164 BXEB-L1120Z-40E4000-C-C3 4000 80 5350 200 BXEB-L1120Z-40G4000-C-C3 90 4390 164 BXEB-L1120Z-50E4000-C-C3 5000 80 5350 200 BXEB-L1120Z-50G4000-C-C3 90 4390 164 BXEB-L1120Z-57E4000-C-C3 5700 80 5350 200 BXEB-L1120Z-57G4000-C-C3 90 4390 164 Notes for Table 1: 1. Nominal CCT as defined by ANSI C78.377-2011. 2. Data is at nominal test current where temperature of center case temperature point Tc= 25° C. 3. Bridgelux maintains a ± 7% tolerance on flux data.

Electrical Characteristics

Table 2: Electrical Characteristics Part Number Drive Current (mA) Forward Voltage Tc2 = 25º C (V) 1, 2,3 Typical Coefficient of Forward Voltage4 ∆Vf/∆T (mV/º C) Driver Selection Voltages5 (V) Minimum Typical Maximum Vf Min, Hot Tc2 = 85º C (V) Vf Max, Cold Tc2 = -40º C (V) BXEB-L0280Z-xxx1000-C-C3 BXEB-L0560Z-xxx2000-C-C3 BXEB-L1120Z-xxx4000-C-C3 Notes for Table 2: 1. Voltage minimum and maximum are provided for reference only and are not a guarantee of performance. 2. Bridgelux maintains a tolerance of ± 0.1 V on forward voltage data. 3. This product has been designed and manufactured per IEC 62031:2014. The working voltage designated for the insulation is 60 V d.c. The maximum allow- able voltage across the module must be determined in the end product application. 4. Typical coefficient of forward voltage tolerance is ± 0.1 mV for nominal current. 5. Vf min hot and max cold values are provided as reference only and are not guaranteed. These values are provided to aid in driver design and selection over the operating range of the product.

Table 3: Maximum Ratings Parameter Maximum Rating Storage Temperature -40°C to +85°C Operating Case Temperature2 (Tc) 85°C Soldering Temperature 350°C or lower for a maximum of 5 seconds Maximum Reverse Voltage Modules are not designed to be driven in reverse bias BXEB-L0280Z-xxx1000-C-C3 BXEB-L0560Z-xxx2000-C-C3 BXEB-L1120Z-xxx4000-C-C3 Maximum Drive Current 700mA 1400mA 1400mA Notes for Table 3: 1. For IEC 62717 requirement, please consult your Bridgelux sales representative. 2. Lumen maintenance (L70) and lifetime predictions are valid for drive current and case temperature conditions used for LM-80 testing as included in the applicable LM-80 test report for the SMDs used in the modules. Contact your Bridgelux sales representatives for LM-80 report.

Figure 9: Typical Spatial Radiation Pattern Notes for Figure 9: 1. Typical viewing angle is 120⁰. 2. The viewing angle is defined as the off axis angle from the centerline where Iv is ½ of the peak value. 20% 40% 60% 80% 100% 120% -100 -80 -60 -40 -20 0 20 40 60 80 100 Relative Intensity Angle (°)

Table 7: Connector and wiring Mechanical Dimensions Parameter Specification Input wire cross-section 18-24 AWG Wire strip length 7-9 mm Notes for Figures 12, 13 & 14: 1. Solder pads are labeled “+” to denote positive polarity, and “-” to denote negative polarity. 2. Drawings are not to scale. 3. Drawing dimensions are in millimeters. 4. Unless otherwise specified, the tolerances are ± 0.10mm.. Figure 14: Drawing for EB Series Gen3 1120mm Parameter Specification Unit Linear length 1120 mm Linear width 24 mm Linear thickness 6.1 mm PCB thickness 1.6 mm Table 6: Dimensions for 1120mm

Figure 15: Graph of Warm and Neutral White T est Bins in xy Color Space Bin Code 2700K 3000K 3500 K 4000K B3 (3 SDCM) CCT Range 2651K - 2794K 2968K - 3136K 3369K - 3586K 3851K - 4130K ANSI Bin (for reference only) (2580K - 2870K) (2870K - 3220K) (3220K - 3710K) (3710K - 4260K) Table 8: Warm and Neutral White xy Bin Coordinates and Associated Typical CCT Figure 16: Graph of Cool White T est Bins in xy Color Bin Code 5000K 5700K B3 (3 SDCM) CCT Range 4835K - 5215K 5490K - 5820K Center Point (x, y) (0.3445, 0.355) (0.329, 0.342) ANSI Bin (for reference only) (4745K - 5311K) (5312K - 6022K) Notes for Tables 8 and 9 1. Color binning at solder point temperature Tsp of SMDs at 85°C. 2. Bridgelux maintains a tolerance of ± 0.007 on x and y color coordinates in the CIE 1931 color space. Table 9: Cool White xy Bin Coordinates and Associated Typical CCT 0.35 0.37 0.39 0.41 0.43 CIE_Y CIE_X 4000K

3 SDCM

Bridgelux has developed a comprehensive set of application notes and design resources to assist customers in successfully designing with the EB Series product family. For a list of resources under development, visit www.bridgelux.com. Optical Source Models Optical source models and ray set files are available for all Bridgelux products. For a list of available formats, visit www.bridgelux.com. MINOR PRODUCT CHANGE POLICY The rigorous qualification testing on products offered by Bridgelux provides performance assurance. Slight cos- metic changes that do not affect form, fit, or function may occur as Bridgelux continues product optimization. CAUTION: CHEMICAL EXPOSURE HAZARD Exposure to some chemicals commonly used in luminaire manufacturing and assembly can cause damage to the LED linear. Please consult Bridgelux Application Note for additional information. CAUTION: EYE SAFETY Eye safety classification for the use of Bridgelux EB Series is in accordance with IEC/TR62778: Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires. EB Series linears are classified as Risk Group 1 (TBD) when operated at or below the maximum drive current. Please use appropriate precautions. It is important that employees working with LEDs are trained to use them safely. CAUTION: RISK OF BURN Do not touch the EB Series linears during operation. Allow the linear to cool for a sufficient period of time be- fore handling. The EB Series linears may reach elevated temperatures such that could burn skin when touched. 3D CAD Models Three dimensional CAD models depicting the product outline of all Bridgelux EB Series LED linears are avail- able in both IGES and STEP formats. Please contact your Bridgelux sales representative for assistance. CAUTION CONTACT WITH LIGHT EMITTING SURFACE (LES) Avoid any contact with the LES. Do not touch the LES of the linear or apply stress to the LES (yellow phosphor resin area). Contact may cause damage to the linear. Optics and reflectors must not be mounted in contact with the LES (yellow phosphor resin area). Optical devices may be mounted on the top surface of the EB Series linear. Use the mechanical features of the linear housing, edges and/or mounting holes to locate and secure optical devices as needed. STANDARD TEST CONDITIONS Unless otherwise stated, linear testing is performed at the nominal drive current.

About Bridgelux: Bridging Light and Life™ © 2019 Bridgelux, Inc. All rights reserved. Product specifications are subject to change without notice. Bridgelux and the Bridgelux stylized logo design are registered trade- marks of Bridgelux, Inc. EB Series and Bridging Light and Life are trademarks of Bridgelux, Inc. All other trademarks are the property of their respective owners. Bridgelux EB Series Gen3 Data Sheet DS132 Rev. A (06/2019)

46430 Fremont Blvd

Fremont, CA 94538 USA Tel (925) 583-8400 Fax (925) 583-8401 www.bridgelux.com At Bridgelux, we help companies, industries and people experience the power and possibility of light. Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective and easy to integrate. Our focus is on light’s impact on human behavior, delivering products that create better environments, experiences and returns—both experiential and financial. And our patented technology drives new platforms for commercial and industrial luminaires. For more information about the company, please visit bridgelux.com twitter.com/Bridgelux facebook.com/Bridgelux youtube.com/user/Bridgelux linkedin.com/company/bridgelux-inc-_2 WeChat ID: BridgeluxInChina