BX-L BELLNIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Correspond to Analog Ciruits, Ultra Low Noise 8mVp-p Small Size, Long-Life, Isolated Type DC-DC Converter

2 Watt BX-L Series

BX-L series is a 2W, long-life, ultra low noise and isolated type DC-DC converter which is most suitable for analog circuits and analog-digital circuits. It has achieved low conducted emission and low radiated emission with the improved TCT circuit. The output noise is ultra low noise of 8mVp-p and has the ability to become the industry's minimum. <Features> - Ultra Low Noise, 8mVp-p typ. - Over-Heat Protection - DIP IC Size, 5-Side Metallic Shield Case - Over-Current protection - Wide Operating Temp. Range -25°C to +71°C - Isolation Capacitance 100pF max. - Possible to start-up from -30°C (No guarantee) - Isolated Type: DC500V -No Electrolytic Capacitor, No Tantalum Capacitor - Most Suitable for Analog and Digital Circuits -MTBF 1,000,000Hrs , All aging -High Reliability, Long-Life, High Performance - High Reliability with the Latest SMD Structure - Improved TCT Circuits (Patented) <Model, Rating> Table 1 Models Rating lnput Input Voltage Rating Output Output Line Reg Load Reg Noise Efficiency Voltage Range Voltage Current BX-L Series Vdc Vdc Vdc mA %(max) %(max) mVpp(typ) %(typ) BX05-12W08L 5 4.75-6 ±12V ±0-80 0.3 0.3 8 60 BX05-15W07L 5 4.75-6 ±15V ±0-70 0.3 0.3 8 60 * This model is compatible with the old BX series to be used for substitutions. <Specification> Table 2 Rating Input voltage/ Output Voltage Refer to Table 1 Line Regulation 0.3% typ. (For the input voltage range of 5V±5%, at rating load) Load Regulation 0.3% typ. (For the load regulation of 0-100% , at rating input voltage) Temperature Coefficient 0.01%/°C typ. (When operating temperature changes between -20°C to +71°C ) Short Term Drift 30mV/8H max. (Room temperature, rating input/ output) Ripple & Noise 8mVp-p typ. (20MHz bandwidth) Efficiency 60% typ. (Rating input/ output, room temperature, refer to table 1) Over-Current Protection Operates at 105% or more rating load current, auto recovery type. Over-Voltage Protection None Over-Heat Protection Built-in in the regulator part EMI Line Filter Built-in LC type line filter MTBF 1,000,000Hr (EIAJ RCR-9102) Isolation Voltage Between primary and secondary DC500V: for 1min., between case and input/ output DC500V: for 1min. Between primary and secondary DC500V: 10M ohm or more, between case and input/ output DC500V: 10M ohm or more. Isolation Capacitance Between primary and secondary capacitance: 100pF max. Operating Temperature Range -25°Cto +71°C (Temperature derating required from +50°C) Storage Temperature Range -35°C to +85°C Humidity range 95%R. H. max. 5-10Hz All amplitude 10mm (1 hour in each of 3 orthogonal axes) 10-55Hz acceleration 2G (1hour in each of 3 orthogonal axes) Shock Acceleration 20G (3 times in each of 3 orthogonal axes), Shocking time 11±5ms Weight 11g typ. Outline Dimensions W=20 L=49 H=9.8 (mm) (For detail dimensions refer to the attached outline drawing.) *The above specification is provided with rating value, unless otherwise specified. Bellnix DC-DC CONVERTERS BDD20050408-0010A 1 Vibration Isolation Resistance Adopted In World Important Electronic Devices.

<Outline> BX-L Series Figure 1 Dimensions:mm Weight:11g typ. - Terminal pins have the standoff function. - 5-side metallic shield case, black plating - Pin side is not shielded. It is recommended to set a pattern wider than the converter's bottom area right under the converter. <Standard Usage> BX-L Series (±12V, ±15V) Figure 2 - Recommended capacitor C1=22µF-33µF (Electrolytic or multilayer ceramic capacitor) C2=0.47µF (Multilayer ceramic capacitor) - Basically, external capacitors are not required, but noise can be lowered by reducing power line impedance and load impedance. - High frequency and low impedance capacitors are recommended. Before choosing, be sure to check the ripple current. - Noise can be lowered by designing the pattern with short lead and not to make a loop. Bellnix. Co., Ltd. 5-7-8 Negishi Minami-ku, Saitama-shi, Saitama, JAPAN 336-0024 TEL: 048-864-7733 FAX: 048-861-6402 E-mail: info@bellnix.co.jp URL: http://www.bellnix.co.jp/ *All specification are subjected to change without notice. Printed in Japan BD20050408-0010A B xinlle POWER SUPPLY Dream and Creation 3.5 3.5 15.24 151 34 20 18 33.02 5.08 49.0 2.54 9.8max. 4.5typ. N.P Φ0.6 Pin Function 1 -Vin -Vin Common 20 +Vout -Vout Common +Vin +Vin BX-WL Adopted In World Important Electronic Devices. +Vin Load +Vin -Vin +Vout -Vout C3 Load Com BX-L Series