BTRS-3760G

BTRS-3760G OPTOWAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 BTRS-3760G / BTRS-3760-SPG / BTRS-3760AG / BTRS-3760A-SPG 1550 nm TX / 1310 nm RX , 3.3V / 155 Mbps RoHS Compliant SFF Single-Fiber Transceiver

FEATURES

l Single Fiber SFF Bi-Directional Transceiver l 1550 nm DFB LD Transmitter l 1310 nm Receiver l Distance Up to 60 km l Single +3.3 V Power Supply l RoHS Compliant l PECL Differential Inputs and Outputs l 0 to 70oC Operating Temperature: BTRS-3760G l -20 to 85oC Operating Temperature: BTRS-3760AG l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC-60825 Compliant

APPLICATIONS

l SONET/SDH Equipment Interconnect l Fast Ethernet 100 Mb/s Links

DESCRIPTION

The BTRS-3760G series is high performance module for single fiber communications by using 1550 nm transmitter and 1310 nm receiver. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated 1310 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Mb/s) Distance (km) TX (nm) RX (nm) Voltage (V) Package Temp (oC) TX Power (dBm) RX Sens. (dBm) RoHS Compliant BTRS-3760G 125/155 60 1550 DFB 1310 3.3 2X5 SC 0 to 70 0 to -5 -34 Yes BTRS-3760AG 125/155 60 1550 DFB 1310 3.3 2X5 SC -20 to 85 0 to -5 -34 Yes Note: 1. BTRX-XXXXX is receptacle type package with standard case 2. BTRX-XXXXXE is receptacle type package with extended case 3. BTRX-XXXXX-APBBB is pigtail type package with different connector, A=S is SC connector, A=F is FC connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm. Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Temperature Topr 0 -20 oC BTRS-3760G BTRS-3760AG Soldering Temperature --- 260 oC 10 seconds on leads only Power Supply Voltage Vcc 0 4.5 V Input Voltage --- GND Vcc V Output Current Iout 0 30 mA Recommended Operating Conditions Parameter Symbol Min Typ Max Units / Notes Power Supply Voltage Vcc 3.135 3.3 3.465 V Operating Temperature Topr 0 -20 oC / BTRS-3760G oC / BTRS-3760AG Data Rate 155 170 Mb/s Power Supply Current Icc 280 mA

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Transmitter Specifications (0oC < Topr < 70oC, 3.135V < Vcc < 3.465V) Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -5 0 dBm 1 Output Center Wavelength λ 1480 1580 nm Output Spectrum Width σλ 1 nm -20 dB Width Extinction Ratio ER 10 dB Output Eye Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 Optical Rise Time tr 2 ns 10% to 90% Values Optical Fall Time tf 2 ns 10% to 90% Values Relative Intensity Noise RIN -116 dB/Hz Total Jitter TJ 1 ns 2 Electrical Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - VIL 300 1600 mV Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 3 Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 3 Disable Input Voltage -- Low VTDIS,L 0 0.8 V TX Output Enabled Disable Input Voltage -- High VTDIS,H Vcc – 1.3 Vcc V TX Ouput Disabled Shut Off Time for TxDis tDIS 1 ms Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.135 V < Vcc < 3. 465V) Parameter Symbol Min Typ Max Units Notes Optical Sensitivity --- --- --- -34 dBm 1 Maximum Input Power Pin -3 --- --- dBm Signal Detect -- Asserted Pa --- --- -34 dBm Transition: low to high Signal Detect -- Deasserted Pd -43 --- --- dBm Transition: high to low Signal detect -- Hysteresis 1.0 --- 4.0 dB Wavelength of Operation 1260 1360 nm 2 Optical Return Loss ORL 14 dB Electrical Data Output Voltage – Low VOL - VCC -2.0 -1.58 V 3 Data Output Voltage – High VOH - VCC -1.1 -0.74 V 3 SD Output Voltage -- Low VOL - VCC -2.0 -1.58 V 3 SD Output Voltage -- High VOH - VCC -1.1 -0.74 V 3 Signal Detect Assert Time ASMAX 100 µs OFF to ON Signal Detect Deassert Time ANSMAX 300 µs ON to OFF Notes: 1. Minimum sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2.At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 3.These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM PIN Symbol Notes

1 VEEr Directly connect this pin to the receiver ground plane

2 VCC r +3.3V dc power for the receiver section 3 SD Active high on this indicates a received optical signal. 4 RD− Receiver Dataout Bar. See recommended circuit schematic 5 RD+ Receiver Dataout. See recommended circuit schematic 6 VCC t +3.3V dc power for the transmitter section

7 VEEt Directly connect this plan to the transmitter ground plane

8 TxDis Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” 9 TD+ Transmitter Data In. See recommended circuit schematic 10 TD- Transmitter Data In Bar. See recommended circuit schematic MS MS Mounting Studs. Connect to Chassis Ground

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 RECOMMENDED CIRCUIT SCHEMATIC 1) Recommended DC Coupled Interface Circuit Veer1 Vccr2 SD3 RD-4 RD+5 Vcct 6Veet 7TDis 8TD+ 9TD- 10 SFF2X5 terminate in transceiver inputs 100R TDis(LVTTL) MICROSTRIP2 Z=5OR MICROSTRIP1 Z=50R 1uH 10uF 10nF 10uF 10nF Vcc3.3V 130R 130R 1uH 10uF 10nF MICROSTRIP4 Z=5OR MICROSTRIP3 Z=50R 150R 150R R6 130R 82R Vcc3.3V 100R Terminate at device input PHY DEVICE TD- TD+ RD+ RD- SD Vcc3.3V Vcc3.3V LVPECL LVPECL 2) Recommended AC Coupled Interface Circuit Veer1 Vccr2 SD3 RD-4 RD+5 Vcct 6Veet 7TDis 8TD+ 9TD- 10 SFF2X5 TDis(LVTTL) MICROSTRIP6 Z=5OR MICROSTRIP5 Z=50R 1uH C10 10uF 10nF C16 10uF C15 10nF Vcc3.3V R14 130R R15 130R 1uH C12 10uF C11 10nF MICROSTRIP8 Z=5OR MICROSTRIP7 Z=50R R12 150R R13 150R R20 130R R21 82R Vcc3.3V PHY DEVICE TD- TD+ RD+ RD- SD 100nF 100nF R11 130R R10 130R 82R 82R Vcc3.3V C13 100nF C14 100nF R16 130R R17 82R Vcc3.3V R18 130R R19 82R Vcc3.3V Vcc3.3V LVPECL Vcc3.3V LVPECL Terminate in Tranceiver inputs

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 PACKAGE DIAGRAM Units in mm 1) SC Receptacle A) Standard Case BTRS-3760G / BTRS-3760AG B) Extended Case BTRS-3760EG / BTRS-3760AEG

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 2) Pigtail BTRS-3760-SP50G / BTRS-3760A-SP50G Note: Length L is 50± 3 cm. Other pigtail’s length is available upon request. Note: Specifications subject to change without notice.