BTR-800 SOVICO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
UHF 2-Audio Channel Wireless Synthesized Base Station Line Drawings The RTS RadioCom BTR-800 UHF-synthesized wireless intercom systems offer the ultimate in reliable, high performance, high fidelity full-duplex communications. The BTR-800 system includes the BTR-800 frequency-agile base station, working with up to four (4) TR-800 or TR-825 frequency-agile beltpacks. The BTR-800 base station provides full-duplex communications with the beltpacks. The BTR system incorporates two (2) audio channel operation, permitting the beltpack operator to choose between two (2) separate audio channels of communications, with the base station tracking the beltpack selection. This allows the user the flexibility to create a party line and a private line within the same beltpack. The BTR-800 system is perfectly suited for standalone operation and can interface with Audiocom, RTS Two-Wire Intercom, Clear-Com as well as RTS Digital Matrix Intercom systems and other 4-wire communications systems. In addition to the external intercom systems interfaces listed above, the system provides connections for auxiliary balanced audio input and output, as well as WTA (Wireless Talk-Around) and SA (Stage Announce) features. The RTS RadioCom BTR series has been designed for reliable, efficient operation. Operating in the UHF range, the units operate reliably at line-of-sight distances of 1,000 feet. With available antenna systems, from RTS RadioCom, the effective operating range can be extended. The high-efficiency beltpacks provide up to 12 hours of uninterrupted operation using standard alkaline batteries.
Innovating the Future of Global Communications www.rtsintercoms.com Specifications Order Information For ordering information, contact your regional sales representative at: http://rtsintercoms.com/us/intercom/contact (614-722MHz, Europe) in 18MHz TX and RX bands IEC receptacle (1VRMS typical), Line Impedance 300Ω (0.775VRMS typical), Line Impedance 200Ω (1VRMS typical) Line Impedance 200Ω (2VRMS typical at rated deviation into 600Ω) (1% Distortion) 712 channels each 10mW (Normal) Radiated Harmonics four (4) Independent Synthesized IFs FM, 712 channels each Product Dimensions/Weight (48.3cm x 4.4cm x 35.6cm) 7lb 2oz (3.24kg) Shipping Dimensions/Weight (43.2cm x 12.7cm x 58.4cm) 12lb (5.43kg) BTR-800 • UHF 2-Channel Wireless Synthesized Base Station with A4M headset jack BTR-800-RTS • UHF 2-Channel Wireless Synthesized Base Station with A4F headset jack BTR-800-RTS 5-Pin • UHF 2-Channel Wireless Synthsized Base Station with A5F headset jack The specification information is preliminary and is subject to change without notification. Brand names mentioned are the property of their respective companies. Bosch Security Systems, Inc. | 12000 Portland Avenue South | Burnsville, Minnesota 55337 Telephone: 877·863·4169 | Fax: (800) 323-0498 Form Number: F01U247444 Rev 03 Date: February 2013 CONSUMER ALERT Most users do not need a license to operate this wireless microphone system Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliWatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wireless microphones. NOTICE: This wireless microphone system can be configured for both FCC Part 15 (unlicensed) and FCC Part74 (licensed) operation. When shipped from the factory, this wireless microphone system is confi gured for unlicensed operation, and will operate at a power level not to exceed 50 milliWatts, which meets FCC Part 15 requirements. If unlicensed users operate this device in excess of 50 milliWatts, harmful interference may result and the unlicensed user will be subject to substantial monetary forfeitures and other FCC sanctions. The wireless microphone system may be operated by holders of a valid FCC license in the Low Power Auxiliary Radio Service under Part 74 of FCC Rules, at power levels between 50 milliWatts and 250 milliWatts.