BTP-87XXCT-XX-X DBLECTRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Highest Lumen Per Watt Long Operational Life White or Black Housing Superior ESD Protection Instant Light (less than 100ns) Compatible to Luxeon’s “Batwing”
Applications
Accent Light/Down Light/Spot Light Automotive Exterior/Interior Light Large Area LCD Backlights Reading Light Marine/Miner’s Lighting Portable Flashlight/ General Lighting Tolerance: ± see spec Unit: mm Optical Characteristics at TJ=25ºC, IF=350mA Wavelength (nm) CCT (K) Range Drive Voltage @ 350mA Luminous Flux (lm) @350mA PART NUMBER Emitting Color LED Chip Material Lens Color Min Max Typ. Typ. VIEW ANGLE 2θ1/2 (deg) BTP-87NRCT-XX-X/X Normal Red AlInGaP Water Clear 620 630 2.20V 27 lm 90 BTP-87AMCT-XX-X/X Amber AlInGaP Water Clear 610 620 2.20V 30 lm 90 BTP-87YECT-XX-X/X Yellow AlInGaP Water Clear 585 595 2.20V 25 lm 90 BTP-87BLCT-XX-X/X Blue AlInGaN Water Clear 460 475 3.50V 7 lm 90 BTP-87PGCT-XX-X/X Green AlInGaN Water Clear 515 535 3.20V 25 lm 90 BTP-87WWCT-XX-X/X Warm White AlInGaN Water Clear 2800K 3800K 3.50V 20 lm 90 BTP-87WHCT-XX-X/X White AlInGaN Water Clear 5000K 8000K 3.50V 25 lm 90
Part No.: BTP-87XXCT-XX-X/X Page 2 of 6 BriLux 1W Batwing Star Emitter BTP-87XXCT-XX-X/X Absolute Maximum Ratings at TJ=25ºC Parameter Red/Amber/Yellow White/Blue/Green Power Dissipation (W) 0.77 1.22 DC Forward Current (mA)[1] 350 350 Peak Pulsed Forward Current (mA) [4] 1000 1000 Average Forward Current (mA) 350 350 Reverse Voltage (V) 5 5 Reverse Current (uA) 50 50 ESD Sensitivity (V) [2] 2,000 2,000 LED Junction Temperature at 350mA (°C) [3] 125 125 Thermal Resistance Junction to Board (°C/W) 15 15 Temperature Coefficient of VF (mV/°C) -2 -2 Storage Temperature (°C) -40 to +120 -40 to +120 Operating Temperature (°C) -30 to +110 -30 to +110 Lead Soldering Temperature (°C)[4] 240°C for 5 seconds max 240°C for 5 seconds max Application Notes: 1. Proper forward current must be observed to ma intain the junction temperature below maximum rating 2. Although all products listed are class one ESD pr otection (+/- 2KV by HBM mode), care must be fully taken when handling products 3. Specification is subjected to ch ange for improvements without notice. 4. Test conditions: tp ≤10us, duty cycle = 0.005 5. CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink. Please provide proper heat management to prevent damage to the emitter.
Part No.: BTP-87XXCT-XX-X/X Page 3 of 6 BriLux 1W Batwing Star Emitter BTP-87XXCT-XX-X/X CCT, Flux and VF Selection Guide (@ IF=350mA) BTP-87XXCT-XX -X/W/B White Housing (Optional: B=Black) Wavelength Ranks Selection Flux Ranks Selection λD(nm) Color Bin Min Max B5 460 465 B6 465 470 B7 470 475 Blue XX 460 – 475 G6 515 520 G7 520 525 G8 525 530 G9 530 535 Green XX 515 – 535 Red XX 620 – 630 Amber XX 610 – 620 Yellow XX 585 – 595 CCT Ranks Selection V F Ranks Selection CCT(K) Color Temp Bin Min Max 00 2800 3300 01 3300 3800 Warm White XX 2800K – 3800K 02 5000 6000 03 6000 7000 04 7000 8000 White XX 5000K – 8000K (Please specify on order, otherwise, default full range of VF) Color Bin Flux (lumens) H 4.5~6 J 6~8 K 8~10 Blue X Default Full Range M 14~18 N 18~23 P 23~30 Q 30~39 R 39~50 Red Amber Yellow Green White X Default Full Range VF (V) Color Bin Min Max V04 2.0 2.2 V05 2.2 2.4 V06 2.4 2.6 V07 2.6 2.8 Red Amber Yellow VXX(Full) 2.0~2.8 V08 2.8 3.0 V09 3.0 3.2 V10 3.2 3.4 V11 3.4 3.6 V12 3.6 3.8 White Blue Green VXX(Full) 2.8~3.8
Part No.: BTP-87XXCT-XX-X/X Page 4 of 6 BriLux 1W Batwing Star Emitter BTP-87XXCT-XX-X/X Typical Radiation Pattern for Batwing Emitter Fig. 1 Typical Radiation Pattern Fig. 2 Forward Current vs Ambient Temperature
Part No.: BTP-87XXCT-XX-X/X Page 5 of 6 BriLux 1W Batwing Star Emitter BTP-87XXCT-XX-X/X Fig. 3. Forward Current vs Forward Voltage Fig. 4 Forward Current vs Luminous Flux G
Part No.: BTP-87XXCT-XX-X/X Page 6 of 6 BriLux 1W Batwing Star Emitter BTP-87XXCT-XX-X/X Important Notes: z The information contained herein is presented only as a Guide for the application of our products. Brilliance Technologies assumes no responsibility for any infringement of intellectual property or other rights of the third parties which may result from its use. z Brilliance Technologies continually improves the quality of our products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsible of the customer, when using Brilliance Technologies products, to comply with the standard of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such Brilliance Technologies products cause loss of human life, bodily injury or damage to property. z Brilliance Technologies products listed in this data sheet are intended for usage in general electronics and/or non-commercial or industrial lighting products. These products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. z In developing your design, please ensure that Brilliance Technologies products are used within specified operating ranges as set forth in the most recent Brilliance Technologies data sheets. BT-Rev. 1.0B20040917 Specifications are subject to change for improvement without notice. Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved.