BTP-53XXCR-XX-XX DBLECTRO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

ƒ Highest Lumen Per Watt ƒ Long Operational Life ƒ More Energy Efficient ƒ IC Compatible ƒ Low DC Voltage ƒ Superior ESD Protection ƒ Smallest Footprint

Applications

ƒ Accent Lighting ƒ Automotive Exterior/Interior Light ƒ High Power Back Light ƒ Reading Light ƒ Marine/Miner’s Lighting ƒ Portable Lighting Optical Characteristics at Tj=25ºC LED CHIP Wavelength/CCT Range (nm/K) Drive Voltage Luminous Flux @350mA(lm)PART NUMBER MATERIAL Lens Color Min/Max Typ. Typ. VIEW ANGLE 2θ1/2 (deg) BTP-53NRCR-XX-15 AlInGaP Water Clear 620~635 2.85V 15 lm 60 BTP-53AMCR-XX-15 AlInGaP Water Clear 600~620 2.85V 15 lm 60 BTP-53YECR-XX-15 AlInGaP Water Clear 585~595 2.85V 15 lm 60 BTP-53DBCR-XX-05 AlInGaN Water Clear 450~460 3.50V 5 lm 60 BTP-53BLCR-XX-06 AlInGaN Water Clear 460~475 3.50V 6 lm 60 BTP-53GBCR-XX-08 AlInGaN Water Clear 475~485 3.50V 8 lm 60 BTP-53BGCR-XX-15 AlInGaN Water Clear 495~510 3.50V 15 lm 60 BTP-53GMCR-XX-20 AlInGaN Water Clear 510~520 3.50V 20 lm 60 BTP-53PGCR-XX-25 AlInGaN Water Clear 520~525 3.50V 25 lm 60 BTP-53WHCR-XX-20 AlInGaN Water Clear 5000K~8000K 3.60V 20 lm 60 5.30mm 4.00mm1.50mm 2.4mm

Absolute Maximum Ratings at Tj=25ºC Parameter White/Green/Cyan/Blue Red/Amber/Yellow DC Forward Current (mA)[1] 350 350 Peak Pulsed Forward Current (mA) 500 500 Average Forward Current (mA) 350 350 Reverse Voltage (V) 5 5 Reverse Current (uA) 10 10 LED Junction Temperature (°C) 120 120 Al-PCB Temperature (°C)[3] 100 100 Storage Temperature (°C) -40 to +100 -40 to +100 Soldering Temperature (°C)[4] 260 for 5 seconds max 260 for 5 seconds max Application Notes: 1. Proper forward current must be observed to ma intain the junction temperature below maximum rating 2. Although all products listed are class one ESD pr otection (+/- 1KV by HBM mode), care must be fully taken when handling products 3. Measured at back of aluminium PCB without additional heat sink. We recommend mounting BriLux light source directly to heat sink with fasteners for best performance. 4. Measured at contact terminals. 5. Specification is subject ed to change without notice.

Typical Electro-Optical Characteristics Curves at Tj=25ºC (Red/Yellow/Blue/Green)

Typical Electro-Optical Characteristics Curves at Tj=25ºC (White) White BriLux