DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
UNISONIC TECHNOLOGIES CO., LTD BTA04A TRIAC www.unisonic.com.tw 1 of 3 Copyright © 2015 Unisonic Technologies Co., Ltd QW-R401-062.C 4A TRIACS DESCRIPTION The UTC BTA04A is a 4A triacs which can be operated in 3 quadrants only, it uses UTC’s adv anced technology to provide customers with high commutation performances, etc. The UTC BTA04A is suitable for inductive load switching operations, also can be used in ON/OFF function applications such as induction motor starting circuits , heating regulation, static relays etc. SYMBOL ORDERING INFORMATION Ordering Number Pin Assignment Lead Free Halogen Free Package 1 2 3 Packing BTA04AL-x-xx-TF3-T BTA04AG-x-xx-TF3-T TO-220F MT1 MT2 G Tube BTA04AL-x-xx-TF3-T (1)Packing Type (2)Package Type (3)Sensitivity and type (4)Voltage (5)Lead Free (1) T: Tube (2) TF3: TO-220F (3) refer to SENSITIVITY AND TYPE (4) 6: 600V (5) L: Lead Free, G: Halogen Free SENSITIVITY AND TYPE PART NUMBER VOLTAGE SENSITIVITY TYPE SW 600V 10mA LOGIC LEVEL MARKING
UNISONIC TECHNOLOGIES CO., LTD 2 of 3 www.unisonic.com.tw Q W - R 4 0 1 - 0 6 2 . C ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT RMS On-State Current (360° Conduction Angle) TC=90°C I T(RMS) 4 A tp=8.3ms 42 A Non Repetitive Surge Peak On-State Current (TJ initial=25°C) tp=10ms ITSM 40 A I2t Value t p=10ms I 2t 8 A 2s Repetitive F=50Hz 10 A/µs Critical Rate of Rise of On-State Current: IG=50mA, dIG/dt=0.1A/µs Non Repetitive dI/dt 50 A/µs Repetitive Peak Off-State Voltage (TJ=110°C) V DRM/VRRM 600 V Peak Gate Current t p=20µs I GM 4 A Peak Positive Gate Voltage t p=20µs V GM 16 V Peak Positive Gate Power Dissipation t p=20µs P GM) 40 W Average Gate Power Dissipation P G(AV) 1 W Operating Junction Temperature T J -40~+110 °C Storage Junction Temperature T STG -40~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL RESISTANCES PARAMETER SYMBOL RATINGS UNIT Junction to Ambient θJA 60 °C/W Junction to Case (AC) θJC 2.7 °C/W ELECTRICAL CHARACTERISTICS (TJ= 25°C, unless otherwise specified) FOR SNUBBERLESS AND LOGIC LEVEL (3 QUADRANTS) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Gate Trigger Current I GT I-II-III 10 mA Gate Trigger Voltage V GT VD=12V (DC) RL=33Ω TJ=25°C I-II-III 1.5 V Gate Non-Trigger Voltage V GD VD=VDRM, RL=3.3kΩ, TJ=110°C I-II-III 0.2 V Time Gate Trigger t GT VD=VDRM, IG=40mA, dIG/dt=0.5A/µs, TJ=25°C I-II-III 2 µs Holding Current (Note 1) I H I T=100mA, Gate Open, TJ=25°C 15 mA I-III 10 mALatching Current I L IG=1.2IGT, TJ=25°C II 20 mA Peak On-State Voltage (Note 1) VTM ITM=5.5A, tp=380μs, TJ=25°C 1.65 V IDRM V DRM Rated, TJ=25°C 0.01 mARepetitive Peak Off-State Current IRRM V RRM Rated, TJ=110°C 0.75 mA Critical Rate of Rise of Off-State Voltage (Note 1) dV/dt Linear Slope up to VD=67%VDRM, Gate Open, TJ=110°C 10 V/µs Critical Rate of Rise of Off-State Voltage at Commutation (Note 1) (dV/dt)c (dI/dt)c=1.8A/ms, T J=110°C 1 V/µs Note: For either polarity of electrode MT2 voltage with reference to electrode MT1.
UNISONIC TECHNOLOGIES CO., LTD 3 of 3 www.unisonic.com.tw Q W - R 4 0 1 - 0 6 2 . C TYPICAL CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.