BT162

BT162 DIGITRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

144 Market Street

phone +1.908.245-7200 BT162 SERIES SILICON BIDIRECTIONAL THYRISTORS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Value Unit Peak repetitive off-state voltage (TJ = -40 to 110°C, half sine wave, 50 to 60Hz, gate open) BT162-400 BT162-600 V DRM 400 600 Volts Non-repetitive peak off-state voltage (TJ = -40 to +110°C, t ≤ 10ms, gate open) BT162-400 BT162-600 V DSM 500 700 Volts RMS on-state current (full cycle sine wave 50 to 60Hz) C = 80°C) (TC = 95°C) IT(RMS) 12.0 6.0 Amps Peak surge current (1 cycle, TC = 80°C,preceded and followed by rated current) 60Hz 50Hz I TSM 120 110 Amps Rate of rise of on-state current (gate open, non-repetitive) diT/dt 10 A/µs Circuit fusing considerations (TJ = -40 to 110°C , t = 1.0 to 10ms) I2t 40 A2s Peak gate voltage VGM 10 Volts Peak gate current IGM 2.0 Amps Peak gate power (TC = 80°C, pulse width = 2.0µs) PGM 20 Watts Average gate power (TC = 80°C, t = 10ms) PG(AV) 0.5 Watts Operating junction temperature range TJ -40 to +110 °C Storage temperature range Tstg -40 to +150 °C THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal resistance, junction to case RӨJC 2.0 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ. Max Unit Peak blocking current (either direction) (Rated VDRM @ TJ = 110°C, gate open) IDRM 2.0 mA Peak on-state voltage (either direction) (ITM = 17A peak, pulse width = 1 to 2ms, duty cycle ≤ 2%) VTM 1.3

1.75 Volts

Gate trigger current (continuous dc) (main terminal voltage = 12V, RL = 100Ω, minimum gate pulse width = 2.0µs) MT2(+), G(-) MT2(-), G(-) C = -40°C IGT mA Gate trigger voltage (continuous dc) (main terminal voltage = 12V, RL = 100Ω, minimum gate pulse width = 2.0µs) MT2(+), G(-) MT2(-), G(-) (main terminal voltage = rated VDRM, RL = 10kΩ, TJ = 110°C) VGT 0.2 0.9 1.1 1.5 1.5 2.0 Volts sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130204

phone +1.908.245-7200 BT162 SERIES SILICON BIDIRECTIONAL THYRISTORS Characteristic Symbol Min Typ. Max Unit Holding current (either direction) (main terminal voltage= 12V, gate open, initiating current = 200mA) TC = 25°C TC = -40°C IH 6.0 mA Latching current (main terminal voltage = 12V, R L = variable, gate pulse width = 20µs, duty cycle ≤ 2%) MT2(+), G(-) @ IGT = 40mA MT2(-), G(-) @ IGT = 40mA MT2(+), G(-) @ IGT = 75mA, TC = -40°C MT2(-), G(-) @ IGT = 75mA, TC = -40°C IL 6.0 100 mA Critical rate of rise of off-state voltage (Rated V DRM, exponential voltage rise, gate open, TC = 110°C) dv/dt 100 - V/µs Note 1: Off state voltage up to 800V may be applied, but triac may switch into the on-state. In that case, the rate of rise of on-state current should not exceed its specified maximum rating. MECHANICAL CHARACTERISTIC Case TO-220AB Marking Body painted, alpha-numeric Pin out See below TO-220AB Inches Millimeters Min Max Min Max A 0.575 0.620 14.600 15.750 B 0.380 0.405 9.650 10.290 C 0.160 0.190 4.060 4.820 D 0.025 0.035 0.640 0.890 F 0.142 0.147 3.610 3.730 G 0.095 0.105 2.410 2.670 H 0.110 0.155 2.790 3.930 J 0.014 0.022 0.360 0.560 K 0.500 0.562 12.700 14.270 L 0.045 0.055 1.140 1.390 N 0.190 0.210 4.830 5.330 Q 0.100 0.120 2.540 3.040 R 0.080 0.110 2.040 2.790 S 0.045 0.055 1.140 1.390 T 0.235 0.255 5.970 6.480 U - 0.050 - 1.270 V 0.045 - 1.140 - Z - 0.080 - 2.030 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130204

phone +1.908.245-7200 BT162 SERIES SILICON BIDIRECTIONAL THYRISTORS sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130204

phone +1.908.245-7200 BT162 SERIES SILICON BIDIRECTIONAL THYRISTORS sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130204