BSR14 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

 1997 Fairchild Semiconductor Corporation BSR14 BSR14 NPN General Purpose Amplifier This device is for use as a medium power amplifier and switch requiring collector currents up to 500 mA. Sourced from Process 19. See BCW65C for characteristics. C B E SOT-23 Mark: U8 Absolute Maximum Ratings* TA = 25°C unless otherwise noted *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES : 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics TA = 25°C unless otherwise noted Symbol Characteristic Max Units *BSR14 PD Total Device Dissipation Derate above 25°C 350 2.8 mW mW/ °C R θJA Thermal Resistance, Junction to Ambient 357 °C/W Symbol Parameter Value Units VCEO Collector-Emitter Voltage 40 V VCBO Collector-Base Voltage 75 V VEBO Emitter-Base Voltage 6.0 V IC Collector Current - Continuous 800 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C *Device mounted on FR-4 PCB 40 mm X 40 mm X 1.5 mm.

Electrical Characteristics TA = 25°C unless otherwise noted OFF CHARACTERISTICS Symbol Parameter Test Conditions Min Max Units V(BR)CEO Collector-Emitter Breakdown Voltage IC = 10 µA, IB = 0 75 V V(BR)CBO Collector-Base Breakdown VoltageIC = 10 µA, IE = 0 40 V V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 µA, IC = 0 6.0 V ICBO Collector-Cutoff Current V CB = 60 V VCB = 60 V, TA = 150°C nA µA ICEX Collector-Cutoff Current V CE = 60 V, VEB = 3.0 V 10 nA IBEX Reverse Base Current V CE = 60 V, VEB = 3.0 V 20 nA IEBO Emitter-Cutoff Current V EB = 3.0 V, IC = 0 15 nA ON CHARACTERISTICS hFE DC Current Gain I C = 0.1 mA, VCE = 10 V IC = 1.0 mA, VCE = 10 V IC = 10 mA, VCE = 10 V IC = 150 mA, VCE = 10 V IC = 150 mA, VCE = 1.0 V IC = 500 mA, VCE = 10 V 100 300 VCE(sat) Collector-Emitter Saturation Voltage IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA 0.3 1.0 V V VBE(sat) Base-Emitter Saturation Voltage IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA 0.6 1.2 2.0 V V SMALL SIGNAL CHARACTERISTICS fT Current Gain - Bandwidth Product IC = 20 mA, VCE = 20, f = 100 mHz

300 MHz

C CB Collector-Base Capacitance V CB = 10V, IE = 0, f = 1.0 MHz 8.0 pF hie Input Impedance V CE =10V,IC =1.0 mA,f=1.0 kHz 2.0 8.0 kΩ hfe Small-Signal Current Gain V CE =10V,IC =1.0 mA,f=1.0 kHz 50 300 hoe Output Admittance V CE =10V,IC =1.0 mA,f=1.0 kHz 5 35 µS SWITCHING CHARACTERISTICS td Delay Time V CC = 30 V, VBE(OFF) = 0.5 V, 10 ns tr Rise Time I C = 150 mA, IB1 = 15 mA 25 ns ts Storage Time V CC = 30 V, IC = 150 mA, 225 ns tf Fall Time I B1 = IB2 = 15 mA 60 ns Spice Model Vtf=1.7 Xtf=3 Rb=10) NPN General Purpose Amplifier (continued) BSR14

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Formative or In Design First Production Full Production Not In Production DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY , FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Rev. G ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E 2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST SyncFET™ TinyLogic™ UHC™ VCX™