BSPD48RJ45 EATON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Universal RJ45 data signal surge protective device for ethernet cable systems Catalog number:

  • BSPD48RJ45 Description: The Bussmann™ series DIN-Rail mount BSPD48RJ45 Surge Protective Device (SPD) for Ethernet cable systems with RJ connectors is easy to install in new, or retrofitting into existing, installations. The BSPD48RJ45 is installed between the patch panel and the active component (a switch for example). The snap-in mechanism of the supporting foot allows the SPD to be safely grounded via the DIN-Rail. For single applications, the BSPD48RJ45 comes with a supplied mounting bracket with cable lug. Fulfilling the requirements of Category 6, the BSPD48RJ45 can be universally used for all data services up to nominal voltages of 48V . It is well suited for existing services such as Gigabit Ethernet, ATM, ISDN, Voice over IP and Power over Ethernet (PoE+ acc. to IEEE 802.3at up to 57V) and similar applications in structured cabling systems according to Class E up to 250MHz. Protection of all pairs by means of powerful gas discharge tubes and one adapter filter matrix per pair. Agency information
  • UL® 497B Listed
  • RoHS compliant Features:
  • Easy to install or retrofit for protection of all lines
  • CAT 6 according to ISO/IEC 11801
  • CAT 6 in the channel (Class E)
  • Power over Ethernet (PoE+ according to IEEE 802.3at) Dimensions — mm 76.91 19.00 11.72 36.15

Eaton.com/bussmannseries Universal RJ45 data signal surge protective device for ethernet systems Technical Data 2160 Effective August 2018 Follow us on social media to get the latest product and support information. The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton and Bussmann are valuable trademarks of Eaton in the U.S. and other countries. Y ou are not permitted to use the Eaton trademarks without prior written consent of Eaton. UL is a registered trademark of the Underwriters Laboratories, Inc. Eaton

1000 Eaton Boulevard

Cleveland, OH 44122 Eaton.com Bussmann Division

114 Old State Road

Ellisville, MO 63021 United States Eaton.com/bussmannseries © 2018 Eaton All Rights Reserved Printed in USA Publication No. 2160 — BU-SB13143 August 2018 Balanced gas discharge tube Bi-polar suppressor diode Pluggable earthing contact Inductor Circuit diagram Catalog numbers and specifications Catalog number BSPD48RJ45 Nominal voltage (UN) 48 V Max. continuous operating DC voltage (UC) 48 V Max. continuous operating AC voltage (UC) 34 V Max. continuous DC voltage pair-pair (PoE) (UC) 57 V Nominal current (IL) 1 A C2 Nominal discharge current (8/20µs) line- line (In) 150 A C2 Nominal discharge current (8/20µs) line- PG (In) 2.5 kA C2 Total nominal discharge current (8/20µs) line-PG (In) 10 kA C2 nominal discharge current (8/20µs) pair- pair (PoE) (In) 150 A Voltage protection level line-line for In C2 (UP) ≤190 V Voltage protection level line-PG for In C2 (UP) ≤600 V Voltage protection level line-line for In C2 (PoE) (UP) ≤600 V Voltage protection level line-line at 1kV/µs C3 (UP) ≤180 V Voltage protection level line-PG at 1kV/µs C3 (UP) ≤500 V Voltage protection level pair-pair at 1kV/µs C3 (PoE) (UP) ≤600 V Insertion loss at 250 MHz ≤3 dB Capacitance line-line (C) ≤30 pF Capacitance line-PG (C) ≤25 pF Operating temperature range -40°C to +80°C Degree of protection IP10 For mounting on 35mm DIN-Rails per EN 60715 Connection (input / output) RJ45 socket / RJ45 socket Pinning 1 / 2, 3 / 6, 4 / 5, 7 / 8 Grounding Via 35mm DIN-Rails per EN 60715 Enclosure material Zinc die casting Color Bare surface Test standards IEC 61643-21 / EN 61643-21 Agency information UL 497B Warranty 5 Y ears* * See Bussmann series SPD Limited Warranty Statement (3A1502) for details at Eaton.com/bussmannseries. DIN-Rail RJ45 SPDs applications Catalog number BSPD48RJ45 Bus systems and measuring, and control technology Industrial Ethernet X Data networks ATM X Ethernet 10/100/1000 X FDDI, CDDI X Industrial Ethernet X Power over Ethernet (PoE) X Token Ring X VG Any LAN X Video systems Video (2 wire) X