BSL40 ASTRODYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

40W Single Output Class II Switching Power Supplies BSL40 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Model Number Output Voltage Max. O/P Amps Efficiency (230VAC) R&N p-p max. Capacitive Load SINGLE OUTPUT BSL40-5-A 5VDC 8 77% typ. 300mV 23,000uF BSL40-9-A 9VDC 4.4 80% typ. 250mV 10,200uF BSL40-12-A 12VDC 3.33 83% typ. 250mV 4,000uF BSL40-15-A 15VDC 2.66 83% typ. 250mV 5,500uF BSL40-24-A 24VDC 1.66 83% typ. 240mV 1,300uF BSL40-36-A 36VDC 1.1 83% typ. 360mV 600uF BSL40-48-A 48VDC 0.83 85% typ. 400mV 270uF 2”W x 4”L x 1.244”H Up to 40W Output Power Universal 90-264VAC Input Single Outputs from 5VDC to 48VDC High Efficiency up to 85% 3000VAC Isolation 1U Compatible Height

40W Single Output Class II Switching Power Supplies BSL40 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 INPUT SPECIFICATIONS Input Voltage Range 90-264 VAC (100-240VAC nom.) Frequency Range 47-63 Hz Input Current (90 / 264 Vin) 1A / 0.4A Inrush Current (115 / 230 Vin) 30A / 60A typical * Leakage Current (264V / 50Hz) <0.25mA OUTPUT SPECIFICATIONS Voltage and Current (Note 3) See Selection Chart Minimum Load 0 Amps Turn On Delay Time <1S Rise Time <30mS Load Regulation (20%-FL) ± 1% max Line Regulation (LL-HL) ± 1% max Preset Accuracy (FL, 115Vin) 1% Transient Response See Page 3 Over-Shoot and Under-Shoot <10% of O/P Voltage Ripple/Noise (Note 1 & 4) See Selection Chart Over Voltage Protection Latching, re-power Over Power Protection 240% max.* Short Circuit Protection Latching, Auto Recover * Hold Up Time (115V / 60Hz) 8 mS, typ. Capacitive Loading (Note 5) See Selection Chart PHYSICAL SPECIFICATIONS Size (Inches / mm) 2” x 4” x 1.244” / 50.8 x 101.6 x 31.6 Construction Open Frame Weight 5.61oz (159g) GENERAL SPECIFICATIONS Input-Out Isolation 3000VAC Insulation Resistance ≥20MΩ; 500VDC, 1S I/P-O/P Efficiency typ. See Selection Chart Switching Frequency 65Khz, (fixed, typical) Safety UL/cUL: UL60950-1 2nd ed./ C22.2 60950-1 2nd ed. UL-EU: EN60950-1 2nd ed. CE: EN60601-1-2 CB: IEC60950-1 2nd ed. ENVIRONMENTAL SPECIFICATIONS Oper. Temperature (Note 2) -10 to +70°C, See Derate Storage Temperature -25 to +85°C * Relative Humidity 0-95% * ESD IEC61000-4-2 RS IEC61000-4-3 EFT IEC61000-4-4 Surge IEC61000-4-5 CS IEC61000-4-6 DIPS IEC61000-4-11 EMI EN55011 B / CISPR 11 B MTBF 196,000 Hrs Mil Std 217, 25°C Vibration 2G Peak, 10-500Hz, 3 Axis, 30 min Drop Test 70 cm Height NOTES 1. Make all measurements directly at the pins of the supply 2. Specified for free air convection cooling 3. 115Vin minimum required for full load start up 4. Measured by paralleling 47uF/EC and 0.1uF ceramic capacitors on the output at a 20MHz band-width 5. The power supply should start up and operate normally into these capacitive loads within specified input voltage and output current ranges over the specified operating temperature range and according to Derate. These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted

40W Single Output Class II Switching Power Supplies BSL40 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 40W Single Output C lass II Switching Power Supplies BSL40 ser ies WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Derating Curve Ambient ( ) load t Δ a Table 2 Δ Step load Δ Step load

40W Single Output Class II Switching Power Supplies BSL40 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 MECHANICAL DIMENSIONS B 101.6mm 4.00in 94mm 3.70in 50.8mm 2.00in 43.2mm 1.70in 3.8mm .15in 3.8mm .15in 3.175mm .125in +Vout +Vout GND GND 29.6mm max 1.17in 2mm .08in 1.6mm .06in Input connector : Molex 5273 series or equivalent Output connector : Molex 5273 series or equivalent Length 、Width tolerance : 0.1mm (0.004in) 2D outline drawings BSM/L 60 -A 1 : 1 Erica 2012/05/25Height changes BSM60-A_B B ACN ACL REV DRAWING NO. DESCRIPTION DATE SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) PIERCINGBENDINGANGULAR 300<X<800 25<X<100 8<X<25 ±0.1 ±0.1 ±0.15 ±0.2 ±0.3 ±0.25 ±0.2 ±0.15 ±1° APPROVED CHECKED DRAWN Projection SCALE UNIT MODEL NO. PART NO. MATERIAL TITLE mm 100<X<300 ±0.5° ±0.3 ±0.5 ±1.5° ±0.5° ±0.3°X<8 DIMENSION SHEET OF SIZE A4 Length and Width Tolerance: ± 0.1mm (0.004in) 1715