BS107AG

BS107_04 ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

• Pb−Free Package is Available* MAXIMUM RATINGS Rating Symbol Value Unit Drain−Source Voltage VDS 200 Vdc Gate−Source Voltage − Continuous − Non−repetitive (tp ≤ 50 s) VGS VGSM ± 20 ± 30 Vdc Vpk Drain Current Continuous (Note 1) Pulsed (Note 2) ID IDM 250 500 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 350 mW Operating and Storage Junction Temperature Range TJ, Tstg −55 to 150 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. The Power Dissipation of the package may result in a lower continuous drain current. 2. Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. MARKING DIAGRAM & PIN ASSIGNMENT D G N−Channel S Drain Source2 Gate 250 mA, 200 V R DS(on) = 14 (BS107) R DS(on) = 6.4 (BS107A) Preferred devices are recommended choices for future use and best overall value. TO−92 CASE 29 STYLE 30 321 BS 107 YWW BS107 = Specific Device Code Y = Year WW = Work Week See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.

ORDERING INFORMATION

http://onsemi.com

1. Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%.

Figure 1. Switching Test Circuit Figure 2. Switching Waveforms

50 ATTENU›

1 M50

50 INPUT

BS107, BS107A http://onsemi.com Device Package Shipping† BS107 TO−92 BS107G TO−92 (Pb−Free)

1000 Unit / Box

BS107RLRA TO−92 2000 / Tape & Reel BS107RL1 TO−92 2000 / Tape & Reel BS107A TO−92 BS107AG TO−92 (Pb−Free)

1000 Units / Box

BS107ARLRM TO−92 2000 Ammo Pack BS107ARLRP TO−92 2000 Ammo Pack BS107ARL1 TO−92 BS107ARL1G TO−92 (Pb−Free) 2000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifi- cations Brochure, BRD8011/D.

BS107, BS107A http://onsemi.com PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AL NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. R A P J L B K G H SECTION X−X CV D N N XX SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.175 0.205 4.45 5.20 B 0.170 0.210 4.32 5.33 C 0.125 0.165 3.18 4.19 D 0.016 0.021 0.407 0.533 G 0.045 0.055 1.15 1.39 H 0.095 0.105 2.42 2.66 J 0.015 0.020 0.39 0.50 N 0.080 0.105 2.04 2.66 STYLE 30: PIN 1. DRAIN 2. GATE 3. SOURCE

BS107, BS107A http://onsemi.com ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone : 81−3−5773−3850 BS107/D LITERATURE FULFILLMENT : Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone : 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.