BS010SE

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 51

Technical content

ø30 Series Switches & Pilot Lights Heavy duty switches & pilot lights offer both variety and reliability Endures harsh environments

• Degree of protection: IP65
• UL, CSA approved, and EN compliant. Applicable Standards Mark File No. or Organization UL 508 UL Listing File No. E68961 CSA C22.2 No.14 CSA File No. LR21451 EN60947-5-1 EU Low Voltage Directive GB14048.5 CCC No. 200501030514658 Specifications and Ratings Contact Ratings Pushbuttons Illuminated Pushbuttons Selector Switches Illuminated Selector Switches Selector Pushbuttons Contact Block BS/BST (ø30 series) Rated Insulation Voltage 600V Rated Continuous Current 10A Contact Ratings by Utilization Category IEC 60947-5-1 AC-15 (A600) DC-13 (P600) Characteristics Contact Ratings by Utilization Category Operational Voltage 24V 48V 50V 110V 220V 440V Operational Current AC 50/60 Hz AC-12 Control of resistive loads and solid state loads 10A — 10A 10A 6A 2A AC-15 Control of electromagnetic loads (> 72 VA) 10A — 7A 5A 3A 1A DC DC-12 Control of resistive loads and solid state loads 10A 5A — 2.2A 1.1A — DC-13 Control of electromagnets 5A 2A — 1.1A 0.6A — Note: The operational current represents the classification by making and breaking currents (IEC 60947-5-1). Minimum applicable load: 3V AC/DC, 5 mA (applicable range may vary with operating conditions and load types) For mono-levers and cam switches, see pages 55 and 58. BS (BST) Contact Block
• Durable nylon 66 housing has a high resistance against alkalis.
• Silver contacts. Gold contact (gold-plated silver) also available.
• Up to four blocks in two layers can be mounted onto each operator. Contact Blocks Contact Single-pole Contact Block 1NO 1NC 1NO (early make) 1NC (late break) Part No. BS BS010E BS001E BS010SE BS001SE BST BST010 BST001 BST010S BST001S Push Rod Green Red Black White BST contact blocks are used for the following switches and are not interchangeable with BS contact blocks. (The BS housing is dark gray and the BST housing is light gray.)
• Pushlock turn reset and push turn lock switches
• LED illuminated pushbuttons
• LED/incandescent illuminated selector switches
• All models of diecast zinc housing swiches & pilot lights Push Rod M3.5 Terminal Screw Inspection Window Interlock­ ing Groove Mounting Screw (14/03/18)

ø30 Series Switches & Pilot Lights ø30 LED Illuminated Unit Specifications Unit Color Code ➁ Input Operating Voltage LED Lamp Lamp Base Part No. Voltage Pilot Light Illuminated Pushbutton Illuminated Selector Switch amber G: green PW: pure white R: red S: blue W: white Y: yellow Full Voltage 6V AC/DC BA9S/13 LSTD-6➁ 6V AC/DC ±10% 12V AC/DC LSTD-1➁ 12V AC/DC ±10% 24V AC/DC LSTD-2➁ 24V AC/DC ±10% 6V AC/DC E12/15 LETD-6➁ 6V AC/DC ±10% 12V AC/DC LETD-8➁ 12V AC/DC ±10% 24V AC/DC LETD-2➁ 24V AC/DC ±10% Transformer 100/110V AC 120V AC 200/220V AC 240V AC 380V AC 400/440V AC (50/60 Hz) BA9S/13 LSTD-6 6V AC/DC ±10% E12/15 LETD-6➁ DC-DC Converter 110V DC BA9S/13 LSTD-6➁ 6V AC/DC ±10%E12/15 LETD-6➁ Note: A pure white LED lamp is used for yellow illumination. Incandescent Illuminated Unit Specifications Unit Color Code ➁ Input Operating Voltage Incandescent Lamp Lamp Base Part No. Rating Pilot Light Illuminated Pushbutton Illuminated Selector Switch amber G: green O: orange R: red S: blue W: white Full Voltage 6V AC/DC BA9S/13 LS-6 1W (6.3V) 12V AC/DC LS-8 1W (18V) 24V AC/DC LS-3 1W (30V) 6V AC/DC E12/15 LE-6 2W (6.3V) 12V AC/DC LE-8 2W (18V) 24V AC/DC LE-3 12W (30V) Transformer 100/110V AC 120V AC 200/220V AC 240V AC 380V AC 400/440V AC 480V AC (50/60 Hz) BA9S/13 LS-6 1W (6.3V) E12/15 LE-8 2W (18V) LED Lamp Ratings (LSTD) Part No. LSTD-6➁ LSTD-1➁ LSTD-2➁ Lamp Base BA9S/13 Rated Voltage 6V AC/DC 12V AC/DC 24V AC/DC Voltage Range 6V AC/DC ±10% 12V AC/DC ±10% 24V AC/DC ±10% Current Draw AC 8 mA 11 mA 11 mA DC A, R, W: 7 mA G, PW, S: 5.5 mA 10 mA 10 mA Color Code ➁ A (amber), G (green), PW (pure white), R (red), S (blue), W (white) Lamp Base Color Same as illumination color Voltage Marking Die stamped on the base Life (reference value) Approx. 50,000 hours (The luminance is reduced to 50% the initial intensity when used on complete DC.) Internal Circuit LED Chip Resistor Zener Diode Protection Diode ø30 (14/03/18)

ø30 ø30 Series Switches & Pilot Lights LED Lamp Ratings (LETD) Part No. LETD-6➁ LETD-8➁ LETD-2➁ Lamp Base E12/15 Rated Voltage 6V AC/DC 12V AC/DC 24V AC/DC Voltage Range 6V AC/DC ±10% 12V AC/DC ±10% 24V AC/DC ±10% Current Draw A, R, W, Y G, S A, R, W, Y G, S AC 17 mA 8 mA 7 mA 11 mA DC 14 mA 5.5 mA 6.5 mA 10 mA Color Code ➁ A (amber), G (green), R (red), S (blue), W (white), Y (yellow) Lamp Base Color Same as illumination color Voltage Marking Die stamped on the base Life (reference value) Approx. 50,000 hours (The luminance is reduced to 50% the initial intensity when used on complete DC.) Internal Circuit A, R, W Y A, R, W Y G, S LED Chip Resistor Zener Diode Protection Diode Incandescent Lamp Ratings (LS) Part No. LS-6 LS-8 LS-2 LS-3 Lamp Base BA9S/13 Rated Voltage 6V AC/DC 12V AC/DC 18V AC/DC 24V AC/DC Wattage 1W (6.3V) 1W (18V) 1W (24V) 1W (30V) Voltage Marking Die stamped on the base Life (reference value) Approx. 1,000 hours minimum (mean value when used on the rated voltage) Incandescent Lamp Ratings (LE) Part No. LE-6 LE-8 LE-2 LE-3 Lamp Base E12/15 Rated Voltage 6V AC/DC 12V AC/DC 18V AC/DC 24V AC/DC Wattage 2W (6.3V) 2W (18V) 2W (24V) 2W (30V) Voltage Marking Die stamped on the base Life (reference value) Approx. 1,000 hours minimum (mean value when used on the rated voltage) (14/03/18)

ø30 Series Switches & Pilot Lights ø30 Specifications Operating Temperature –25 to +50°C (no freezing) Storage Temperature –40 to +80°C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Contact Resistance 50 mΩ maximum (initial value) Insulation Resistance 100 MΩ minimum (500V DC megger) Dielectric Strength Between live and dead metal parts: 2,500V AC, 1 minute (Full voltage and pilot lights: 2,000V AC, 1 minute) Vibration Resistance Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Shock Resistance Damage limits: 1,000 m/s2 Operating extremes: 100 m/s2 Mechanical Life (minimum operations) Pushbuttons Momentary: 5,000,000 Maintained: 500,000 Illuminated pushbuttons Momentary: 2,500,000 Maintained: 500,000 Selector switches: 500,000 Key selector switches: 500,000 Illuminated selector switches: 500,000 Selector pushbuttons: 250,000 Mono-lever switches: 500,000 (Interlocking): 250,000 Pushlock turn reset 500,000 Mushroom push-pull switch Two contact blocks: 500,000 Four contact blocks: 200,000 Electrical Life (minimum operations) Pushbuttons: 500,000 *1 Illuminated pushbuttons: 500,000 *1 Selector switches: 500,000 *2 Key selector switches: 500,000 *2 Illuminated selector switches: 500,000 *2 Selector pushbuttons: 250,000 *2 Mono-lever switches: 500,000 *3 (Interlocking): 250,000 *1 Switching frequency 1,800 operations/h, duty ratio 40% *4 *2 Switching frequency 1,200 operations/h, duty ratio 40% *3 Switching frequency 900 operations/h, duty ratio 40% *4 Switching frequency 900 operations/h for square twin or twin main- tained Degree of Protection Part No. Unit NEMA ICS 6-110 IEC 60529 A** Pushbuttons, pilot lights, illuminated pushbuttons, selector switches, selector pushbuttons, mono-lever switches, and cam switches (ACSNO/ACSSO) Type 1, 2, 3, 3R, (3S), 4, 5, 12,13 IP65 Illuminated selector switches, key pushbuttons, key reset pushbuttons, key cam switches, and key selector switches Type 1, 2, 3, 3R, 5, 12, 13 IP54 U ** Square pushbuttons, square pilot lights, and cam switches (UC) Type 1, 2 IP40 Note: (3S) of NEMA ICS 6-110 applies to the pilot lights with round lens. Mounting Hole Layout Note: For mounting hole layout of pushbuttons, mono-lever switches, and cam switches, see each section. *The minimum mounting centers are applicable to switches with one layer of contact blocks (two contact blocks). When two layers of contact blocks (four contact blocks) are mounted, determine the minimum mounting centers in consideration of convenience for wiring.

• Mushr oom with shroud: 50 mm minimum
• J umbo mushroom: 67 mm minimum
• J umbo mushroom with shroud: 76 mm minim um
• Square twin: 55 mm minimum
• Select or switch with lever: 50 mm minimum The 4.8 mm recess is for preventing rotation and is not neces - sary when the nameplate or anti-rotation ring is not used. R0.8 max. Square Unit: 55 +0.5 +0.5 +0.2 50∗ Round Unit: 42∗ ø30.5 4.8 R0.8 max. +0.5 0+0.5 +0.2 ø30.5 4.8 (Twin Maintained) ø30 (14/03/18)

ø30 ø30 Series Switches & Pilot Lights (Ordering Information)

Ordering Information

• Specify an operator or lens color code in the Part No.
• Black, green, and red buttons are included with flush push- but tons.
• Terminal covers, nameplates, and accessories are ordered separately. Terminal Cover
• When a terminal cover is required, order an applicable terminal cover referring to page 67. ø30 Series Pushbuttons ABN2 11 R - MAU Optional contact MAU: Gold-plated silver contact Button color code Contact arrangement code 10: 1NO 01: 1NC 11: 1NO-1NC 20: 2NO 02: 2NC 22: 2NO-2NC 40: 4NO 04: 4NC 13: 1NO-3NC 31: 3NO-1NC 30: 3NO 03: 3NC 12: 1NO-2NC 21: 2NO-1NC Note:
• Mushr oom pull ATN23 can have a maximum of two contact blocks.
• Mushroom push-pull return ATN22 cannot have only NO or only NC contacts.
• No other contact configurations are available for square twin UWQN1 than those specified in this catalog. ø30 Series Pilot Lights APN1 116 D R Note:
• LED lamps cannot be used on 480V AC transformers. Lens color code Operating voltage code ø30 Series Illuminated Pushbuttons ALFN2 126 13 D N R - MAU Note:
• Illuminated pushbuttons cannot have an odd number of contact blocks, such as 1NO, 1NC, 3NO, 2NO-1NC, 1NO-2NC, and 3NC. Optional contact MAU: Gold-plated silver contact Lens color code Contact arrangement code 11: 1NO-1NC 20: 2NO 02: 2NC 31: 3NO-1NC 22: 2NO-2NC 13: 1NO-3NC 40: 4NO 04: 4NC Operating voltage code The Part No. development charts shown below can be used to specify switches and pilot lights other than those listed on the following pages. Gold-plated silver contacts are also available. (14/03/18)

ø30 Series Switches & Pilot Lights (Ordering Information) ø30 ø30 Series Selector Switch ø30 Series Key Selector Switch ø30 Series Illuminated Selector Switch ASN 2 L 11 - MAU Optional contact MAU: Gold-plated silver contact Contact arrangement code Operator (blank): Knob L: Lever Operator position code ASN 2 K 11 D - MAU Optional contact MAU: Gold-plated silver contact Key removable position code 2-position

• Maintained (blank): Removable in all positions B: Removable in left only C: Removable in right only
• Spring r eturn from right (blank): Removable in left only
• Spring r eturn from left (blank): Removable in right only 3-position
• Maintained (blank): Removable in all positions B: Removable in left and center C: Removable in right and center D: Removable in center only E: Removable in right and left G: Removable in left only H: Removable in right only
• Spring r eturn from right (blank): Removable in left and center D: Removable in center only G: Removable in left only
• Spring r eturn from left (blank): Removable in right and center D: Removable in center only H: Removable in right only
• Spring r eturn two-way (blank): Removable in center only Contact arrangement code Operator position code Note:
• The ke y cannot be removed in the return position. ASLN 2 16 22 D N R - MAU Optional contact MAU: Gold-plated silver contact Lens color code Contact arrangement code Operating voltage code Number of positions ø30 (14/03/18)

ø30 ø30 Series Pushbuttons Flush / Extended / Extended w/Half Shroud / Extended w/Full Shroud Pushbuttons Package Quantity: 1 Shape Operation Contact Part No. ➀ Button Color Code Dimensions (mm) Flush ABN1 Momentary 1NO ABN110➀ Black (B), green (G), and red (R) buttons are sup plied with each unit. Specify S, W, or Y when a blue, white, or yellow button is required. M3.5 Terminal Screw 6 23 46 (1 or 2 blocks) 69 (3 or 4 blocks) Panel Thickness 0.8 to 7.5 ø35 1NC ABN101➀ 1NO-1NC ABN111➀ 2NO ABN120➀ 2NC ABN102➀ 2NO-2NC ABN122➀ Flush AON1 Maintained 1NO AON110➀ M3.5 Terminal Screw 6 23 Panel Thickness 0.8 to 7.5 ø35 68 (1 to 2 blocks) 91 (3 to 4 blocks) 1NC AON101➀ 1NO-1NC AON111➀ 2NO AON120➀ 2NC AON102➀ 2NO-2NC AON122➀ Extended ABN2 Momentary 1NO ABN210➀ Specify a button color code in place of ➀ in the Part No. B: black G: green R: red S: blue W: white Y: yellow M3.5 Terminal Screw 6 23 46 (1 or 2 blocks) 69 (3 or 4 blocks) Panel Thickness 0.8 to 7.5 ø35 ø25 15.5 1NC ABN201➀ 1NO-1NC ABN211➀ 2NO ABN220➀ 2NC ABN202➀ 2NO-2NC ABN222➀ Extended AON2 Maintained 1NO AON210➀ M3.5 Terminal Screw 6 23 Panel Thickness 0.8 to 7.5 ø35 ø25 15.5 68 (1 to 2 blocks) 91 (3 to 4 blocks) 1NC AON201➀ 1NO-1NC AON211➀ 2NO AON220➀ 2NC AON202➀ 2NO-2NC AON222➀ Extended with Half Shroud ABN2G Momentary 1NO ABN2G10➀ M3.5 Terminal Screw 6 23 ø35 ø25 Panel Thickness 0.8 to 4 20.5 ø27 42 (1 or 2 blocks) 65 (3 or 4 blocks) 1NC ABN2G01➀ 1NO-1NC ABN2G11➀ 2NO ABN2G20➀ 2NC ABN2G02➀ 2NO-2NC ABN2G22➀ Extended with Half Shroud AON2G Maintained 1NO AON2G10➀ M3.5 Terminal Screw 6 23 ø35 ø25 Panel Thickness 0.8 to 4 20.5 ø27 64 (1 or 2 blocks) 87 (3 or 4 blocks) 1NC AON2G01➀ 1NO-1NC AON2G11➀ 2NO AON2G20➀ 2NC AON2G02➀ 2NO-2NC AON2G22➀ Extended with Full Shroud ABN2F Momentary 1NO ABN2F10➀ M3.5 Terminal Screw 6 23 ø35 ø25 Panel Thickness 0.8 to 7.5 46 (1 or 2 blocks) 69 (3 or 4 blocks) ø28.5 1NC ABN2F01➀ 1NO-1NC ABN2F11➀ 2NO ABN2F20➀ 2NC ABN2F02➀ 2NO-2NC ABN2F22➀ Extended with Full Shroud AON2F Maintained 1NO AON2F10➀ M3.5 Terminal Screw 6 23 ø35 ø25 Panel Thickness 0.8 to 7.5 ø28.5 68 (1 or 2 blocks) 91 (3 or 4 blocks) 1NC AON2F01➀ 1NO-1NC AON2F11➀ 2NO AON2F20➀ 2NC AON2F02➀ 2NO-2NC AON2F22➀

• Round bezel and shroud (metal): Chrome-plated
• Other contact arrangements and gold-plated silver contacts are also available. See page 20. (nameplate sold sepa- rately) (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) (nameplate sold sepa- rately) (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) (14/03/18)

ø30 Series Pushbuttons ø30 Mushroom / Jumbo Mushroom / Square Flush / Square Extended Pushbuttons Package Quantity: 1 Shape Operation Contact Part No. ➀ Button Color Code Dimensions (mm) Mushroom ABN3 Momentary 1NO ABN310➀ B: black G: green R: red S: blue W: white Y: yellow M3.5 Terminal Screw 6 23 40 Panel Thickness 0.8 to 7.5 46 (1 or 2 blocks) 69 (3 or 4 blocks) ø40 1NC ABN301➀ 1NO-1NC ABN311➀ 2NO ABN320➀ 2NC ABN302➀ 2NO-2NC ABN322➀ Mushroom AON3 Maintained 1NO AON310➀ M3.5 Terminal Screw 6 23 40 Panel Thickness 0.8 to 7.5 68 (1 or 2 blocks) 91 (3 or 4 blocks) 21 ø40 1NC AON301➀ 1NO-1NC AON311➀ 2NO AON320➀ 2NC AON302➀ 2NO-2NC AON322➀ Mushroom with Full Shroud ABN3G Momentary 1NO ABN3G10➀ M3.5 Terminal Screw 62 3 Panel Thickness 0.8 to 6.5 44 (1 or 2 blocks) 67 (3 or 4 blocks) ø48 1NC ABN3G01➀ 1NO-1NC ABN3G11➀ 2NO ABN3G20➀ 2NC ABN3G02➀ 2NO-2NC ABN3G22➀ Palm Mushroom ABN4 Momentary 1NO ABN410➀ B: black G: green R: red M3.5 Terminal Screw 6 23 46 (1 or 2 blocks) 69 (3 or 4 blocks) Panel Thickness 0.8 to 7.5 ø74 1NC ABN401➀ 1NO-1NC ABN411➀ 2NO ABN420➀ 2NC ABN402➀ 2NO-2NC ABN422➀ Jumbo Mushroom with Shallow Shroud ABN4G Momentary 1NO ABN4G10➀ M3.5 Terminal Screw 6 23 Panel Thickness 0.8 to 7.5 ø75 46 (1 or 2 blocks) 69 (3 or 4 blocks) ø65 1NC ABN4G01➀ 1NO-1NC ABN4G11➀ 2NO ABN4G20➀ 2NC ABN4G02➀ 2NO-2NC ABN4G22➀ Jumbo Mushroom with Deep Shroud ABN4F Momentary 1NO ABN4F10➀ M3.5 Terminal Screw 62 3 Panel Thickness 0.8 to 7.5 32.5 ø75 46 (1 or 2 blocks) 69 (3 or 4 blocks) 1NC ABN4F01➀ 1NO-1NC ABN4F11➀ 2NO ABN4F20➀ 2NC ABN4F02➀ 2NO-2NC ABN4F22➀ Square Flush UBQN1 Momentary 1NO UBQN110➀ B: black G: green R: red Y: yellow M3.5 Terminal Screw 62 3 Panel Thickness 0.8 to 5.5 52.2 70.5 (3 or 4 blocks) 47.5 (1 or 2 blocks) 1NC UBQN101➀ 1NO-1NC UBQN111➀ 2NO UBQN120➀ 2NC UBQN102➀ 2NO-2NC UBQN122➀ Square Extended UBQN2 Momentary 1NO UBQN210➀ M3.5 Terminal Screw 6 23 Panel Thickness 0.8 to 5.5 47.5 (1 or 2 blocks) 52.2 70.5 (3 or 4 blocks) 1NC UBQN201➀ 1NO-1NC UBQN211➀ 2NO UBQN220➀ 2NC UBQN202➀ 2NO-2NC UBQN222➀

• Specify a button color code in place of ➀ in the Part No.
• Round/square bezel and shroud (metal): Chrome-plated
• Other contact arrangements and gold-plated silver contacts are also available. See page 20. (nameplate sold separately) (nameplate sold separately) ø30 (14/03/18)

ø30 ø30 Series Pushbuttons Pushlock Turn Reset / Pushlock Key Reset / Push Turn Lock / Key ON/OFF Lock / Toggle Lever Pushbuttons Package Quantity: 1 Shape Contact Part No. ➀ Button Color Code Dimensions (mm) Mushroom Pushlock Turn Reset AVN3 1NO AVN310N➀ R: red Y: yellow M3.5 Terminal Screw 53 (1 or 2 blocks) 76 (3 or 4 blocks) ø40 Panel Thickness 0.8 to 7.5 5.5 23 1NC AVN301N➀ 1NO-1NC AVN311N➀ 2NO AVN320N➀ 2NC AVN302N➀ 2NO-2NC AVN322N➀ Mushroom Pushlock Key Reset ABN3K 1NO ABN3K10➀ B: black G: green R: red Y: yellow M3.5 Terminal Screw FREE 6 23 40 53 (1 or 2 blocks) 76 (3 or 4 blocks) ø40 Panel Thickness 0.8 to 7.5 24 23.5 1NC ABN3K01➀ 1NO-1NC ABN3K11➀ 2NO ABN3K20➀ 2NC ABN3K02➀ 2NO-2NC ABN3K22➀ Jumbo Mushtoon Pushlock Key Reset ABN4K 1NO ABN4K10➀ B: black G: green R: red M3.5 Terminal Screw FREE 6 23 53 (1 or 2 blocks) 76 (3 or 4 blocks) Panel Thickness 0.8 to 7.5 ø65 23 23.5 1NC ABN4K01➀ 1NO-1NC ABN4K11➀ 2NO ABN4K20➀ 2NC ABN4K02➀ 2NO-2NC ABN4K22➀ Pushlock Push Turn Lock AJN3 1NO AJN310N➀ B: black G: green R: red Y: yellow M3.5 Terminal Screw K PUSH LOC 53 (1 or 2 blocks) 76 (3 or 4 blocks) ø40 Panel Thickness 0.8 to 7.5 5.5 23 1NC AJN301N➀ 1NO-1NC AJN311N➀ 2NO AJN320N➀ 2NC AJN302N➀ 2NO-2NC AJN322N➀ Key ON/OFF Lock ABN5 1NO ABN510 M3.5 Terminal Screw LOCK 6 23 Panel Thickness 0.8 to 7.5 23 23.5 54 (1 or 2 blocks) 77 (3 or 4 blocks) ø25 ø35 1NC ABN501 1NO-1NC ABN511 2NO ABN520 2NC ABN502 2NO-2NC ABN522 Toggle Lever ATN4 1NO ATN410 Lever: black M3.5 Terminal Screw Panel Thickness 0.8 to 5.5 6 23 44 (1 or 2 blocks) 25 67 (3 or 4 blocks) ø35 1NC ATN401 1NO-1NC ATN411 2NO ATN420 2NC ATN402 2NO-2NC ATN422

• Specify a button color code in place of ➀ in the Part No.
• Round bezel (metal): Chrome-plated
• Cylinder (metal): Chrome-plated
• Other contact arrangements and gold-plated silver contacts are also available. See page 20.
• Pushlock Turn Reset: Button is maintained when pressed and is reset when turned clockwise. Red buttons only. Note: ø30 pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (ISO 13850 and IEC 60947-5-5 compliant).
• Pushloc k Key Reset: Button is maintained when pressed and is reset with a key. Key is removable from both depressed and reset posi- tions. Two keys are supplied. Note: ø30 pushlock key reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use HW series emergency stop switches with a HW9Z-A30 ring adapter (ISO 13850 and IEC 60947-5-5 compliant).
• Push T urn Lock: Button is locked when turned clockwise in the depressed position and is reset when turned counterclockwise.
• Key ON/OFF Lock: Button can be locked in both depressed and reset positions.
• Toggle Lever: ON and OFF are indicated on the cap. (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) (14/03/18)

ø30 Series Pushbuttons ø30 Pull / Push-Pull / Pin Lock Pushbuttons Package Quantity: 1 Shape Contact Part No. ➀ Button Color Code Dimensions (mm) Mushroom Pull ATN23 1NO ATN2310➀ B: black G: green R: red Y: yellow M3.5 Terminal Screw 53 (1 or 2 blocks) ø40 Panel Thickness 0.8 to 7.5 6 23 38.5 1NO-1NC ATN2311➀ 2NO ATN2320➀ 2NC ATN2302➀ Mushroom Push-Pull ATN21 1NO-1NC ATN2111➀ M3.5 Terminal Screw 53 (1 or 2 blocks) ø40 Panel Thickness 0.8 to 7.5 6 23 38.5 76 (3 or 4 blocks) 2NO ATN2120➀ 2NC ATN2102➀ 2NO-2NC ATN2122➀ ATN22 (Spring Return) Mushroom Push-Pull 1NO-1NC ATN2211➀ M3.5 Terminal Screw 53 (1 or 2 blocks) ø40 Panel Thickness 0.8 to 7.5 6 23 38.5 76 (3 or 4 blocks) 2NO-2NC ATN2222➀ Pin Lock ABN8P 1NO ABN8P10 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 44.5 (1 or 2 blocks) 67 (3 or 4 blocks) 26.5 ø28 ø35 1NC ABN8P01 1NO-1NC ABN8P11 2NO ABN8P20 2NC ABN8P02 2NO-2NC ABN8P22 Pin Lock (ON Lock) ABN8P**-TK231-1 1NO ABN8P10-TK231-1 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 44 (1 or 2 blocks) 67 (3 or 4 blocks) 25.4 ø28 ø35 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 44 (1 or 2 blocks) 67 (3 or 4 blocks) 25.4 ø28 ø35 1NC ABN8P01-TK231-1 1NO-1NC ABN8P11-TK231-1 2NO ABN8P20-TK231-1 2NC ABN8P02-TK231-1 2NO-2NC ABN8P22-TK231-1

• Specify a button color code in place of ➀ in the Part No.
• Round bezel and shroud (metal): Chrome-plated
• Square bezel (metal): Chrome-plated
• Other contact arrangements and gold-plated silver contacts are also available. See page 20.
• Pull: Pulling the button operates the contacts. Up to 2 contact blocks (1 layer) can be mounted on pull switches.
• Push-Pull: Button is maintained in both depressed and reset positions. Note: ø30 push pull switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN series emergency stop switches (ISO 13850 and IEC 60947-5-5 compliant).
• Push-P ull (Spring Return): Pushing or pulling the button operates the contacts. Button is spring-returned to the center position.
• Pin Lock: Button can be locked in either depressed or reset position by inserting the pin. Pad lock with a ø6mm pin can also be used to lock the button.
• Pin Lock (ON Lock): Button is locked in the depressed position by inserting the pin. Button cannot be locked in the reset position. (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) Pull Switch (Spring Return) Contact ATN23 Normal Pull 1NO 1NC 1NO-1NC 2NO 2NC Push-Pull Switch (Maintained) Contact ATN21 Push Pull 1NO-1NC 2NO 2NC 2NO-2NC Push-Pull (Spring Return) Contact ATN22 Push Normal Pull 1NO-1NC 2NO-2NC Contact Operation ø30 (14/03/18)

ø30 ø30 Series Pushbuttons Square Twin / Twin Maintained Pushbuttons Package Quantity: 1 Shape Contact Part No. Button Color Dimensions (mm) Square Twin (Momentary) UWQN1 ON OFF ON: Black OFF: Red O N OFF M3.5 Terminal Screw 6 23 Panel Thickness 0.8 to 13 47 (1 or 2 blocks) 70 (3 or 4 blocks) 15.5 1NO 1NO UWQN11010 1NO 1NC UWQN11001 2NO 2NC UWQN12002 Square Twin (Maintained) UWQN2 ON OFF ON: Black OFF: Red O N OFF M3.5 Terminal Screw 6 23 Panel Thickness 0.8 to 13 47 (1 block) 70 (2 blocks) 15.5 1NO – UWQN21000 1NC – UWQN20100 1NO-1NC – UWQN21100 2NO – UWQN22000 2NC – UWQN20200 Flush Twin Maintained ABBN11 Top Bottom Black (B), green (G), and red (R) buttons are sup plied with each unit. 0.8 to 7.5 M3.5 Terminal Screw Panel Thickness ø35 91NO – ABBN1110 1NC – ABBN1101 1NO-1NC – ABBN1111 2NO – ABBN1120 2NC – ABBN1102 2NO-2NC – ABBN1122 Mushroom Twin Maintained (Without buttons) ABBN33 Top Bottom M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 ø40 211NO – ABBN3310 1NC – ABBN3301 1NO-1NC – ABBN3311 2NO – ABBN3320 2NC – ABBN3302 2NO-2NC – ABBN3322

• Round bezel (metal): Chrome-plated
• Other contact arrangements and gold-plated silver contacts are also available. See page 20.
• Square Twin (Momentary): Two independent momentary switches are contained in one unit, each operated by ON or OFF button. With the ø30 adapter removed from the sleeve, the unit can mount in a ø25.5mm mounting hole for the ø25 series.
• Square Twin (Maintained): The contact operates when ON button is pressed and is maintained in the depressed position. The button is reset by pressing the OFF button.
• Twin Maintained: The contact operates when the top button is pressed and is maintained in the depressed position. The button is reset by pressing the bottom button. Different combinations of flush, extended HW9Z-A30 buttons, and colors are available (ABN1B- *, ABN2B-*). See page 73. Mushroom buttons for the ABBN33 are ordered separately. Specify the color code (ABN3B-*). See page 73. (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) (nameplate sold separately) (14/03/18)

ø30 Series Pilot Lights ø30 Dome Pilot Lights Package Quantity: 1 Shape Lamp Lamp Recep- tacle Part No. ➁ Lens/LED Color Code Applicable Lamp Dome APN1 APNE1 Without Lamp BA9S APN199➁ DNA: amber C: clear G: green O: orange R: red S: blue W: white DNY: yellow See page 75 for lamps. E12 APNE199➁ LED BA9S APN1➂DN➁ A: amber G: green PW: pure white R: red S: blue W: white Y: yellow LSTD- E12 APNE1➂DN➁ A: amber G: green R: red S: blue W: white Y: yellow LETD-*➁ Incandescent BA9S APN1➂➁ C: clear G: green O: orange R: red S: blue W: white LS- E12 APN1➂➁ LE-* Operating Voltage Code Specify an operating voltage code in place of ➂ in the Part No. ➂ Operating Voltage Code InputLED Incandescent (BA9S) Incandescent (E12) 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC Full Voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 18: 100/110V AC 128: 120V AC 238: 200/220V AC 248: 240V AC 388: 380V AC 48: 400/440V AC 488: 480V AC Transformer 16D: 110V DC DC-DC Converter *

• Specify a lens/LED color code in place of ➁ in the Part No.
• Use a white lens for LED pure white illumination (LSTD).
• Use a pure white LED lamp for yellow illumination. * DC-DC converter types are not approved by UL and CSA, and not CE compliant (operating voltage 90 to 140V DC). Dimensions M3 Terminal Screw ø35 Panel Thickness 0.8 to 7.5 21.5 23.5 M3.5 Terminal Screw ø35 Panel Thickness 0.8 to 7.5 23.5 58.5 All dimensions in mm. Full Voltage Transformer DC-DC Converter ø30 (14/03/18)

ø30 ø30 Series Pilot Lights Square / Rectangular (Marking) Pilot Lights Package Quantity: 1 Shape Lamp Lamp Recep- tacle Part No. ➁ Lens/LED Color Code Applicable Lamp Square UPQN3B Without Lamp BA9S UPQN3B99➁ DA: amber C: clear G: green O: orange R: red S: blue W: white DY: yellow See page 75 for lamps. LED BA9S UPQN3B➂D➁ A: amber G: green R: red S: blue W: white Y: yellow LSTD-*➁ Incandescent BA9S UPQN3B➂➁ C: clear G: green O: orange R: red S: blue W: white LS-* Rectangular (Marking) UPQN4 Without Lamp BA9S UPQN499➁ DA: amber G: green O: orange R: red S: blue W: white DY: yellow See page 75 for lamps. LED BA9S UPQN4➂D➁ A: amber G: green R: red S: blue W: white Y: yellow LSTD-*➁ Incandescent BA9S UPQN4➂➁ G: green O: orange R: red S: blue W: white LS- Rectangular (Marking) UPQNE4 UPQN4 Without Lamp E12 UPQNE499 DA: amber G: green O: orange R: red S: blue W: white DY: yellow See page 75 for lamps. LED E12 UPQNE4➂D➁ A: amber G: green R: red S: blue W: white Y: yellow LETD-*➁ Incandescent E12 UPQN4➂➁ (Note) G: green O: orange R: red S: blue W: white LE- Operating Voltage Code Specify an operating voltage code in place of ➂ in the Part No. ➂ Operating Voltage Code Input TypeLED Incandescent (BA9S) Incandescent (E12) 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC (Note) When ordering 6V, 12V, 24V AC/DC units, specify "E " before the operating voltage code. UPQN4E➂➁. Full Voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 18: 100/110V AC 128: 120V AC 238: 200/220V AC 248: 240V AC 388: 380V AC 48: 400/440V AC 488: 480V AC Transformer 16D: 110V DC DC-DC Converter *

• Specify a lens/LED color code in place of ➁ in the Part No.
• Use a pure white LED lamp for yellow illumination (LSTD)
• On the rectangular marking pilot light, a clear lens and a color marking plate are used for white illumination. Marking plate: 24 × 30 mm, 2 mm thick * DC-DC converter types are not approved by UL and CSA, and not CE compliant (operating voltage 90 to 140V DC). (14/03/18)

ø30 Series Pilot Lights ø30 M3 Terminal Screw Panel Thickness 0.8 to 5.5 23 20 52.2 M3 Terminal Screw Panel Thickness 0.8 to 4.5 52.2 29.5 10.5 34 ¥ 40 M3 Terminal Screw Panel Thickness 0.8 to 4.5 52.2 10.5 34 ¥ 40 36.5 M3.5 Terminal Screw Panel Thickness 0.8 to 5.5 52.2 M3.5 Terminal Screw Panel Thickness 0.8 to 4.5 52.2 10.5 34 ¥ 40 30 ¥ 36 M3.5 Terminal Screw Panel Thickness 0.8 to 4.5 52.2 10.5 34 ¥ 40 30 ¥ 36 Square Full Voltage UPQN3B Rectangular Full Voltage UPQN4 Rectangular Full Voltage UPQNE4 Square Transformer Square DC-DC Converter UPQN3B Rectangular Transformer Rectangular DC-DC Converter UPQN4 Rectangular Transformer Rectangular DC-DC Converter UPQNE4 All dimensions in mm. Reflector 1. The lamp housing of the square LED illuminated pilot lights has a built­in reflector. Make sure that the reflector does not fall off when re­ moving the lens or marking plate. When replacing the LED lamp of UPQNE4 (rectangular), use a lamp holder tool (OR­55). To remove the reflector, insert a flat screwdriver inside the groove of the reflector and lightly push out. Panel Mounting Tighten the square ring to the operator and position the ring correctly. Lightly tighten the screw to secure the pilot light onto the panel. Groove Tighten the screw lightly so that the panel does not bend. Screw Recommended tightening torque: 0.15 N·m Dimensions ø30ø30 (14/03/18)

ø30 ø30 Series Pilot Lights Incandescent Push-to-Check Pilot Lights (1W) Package Quantity: 1 Shape Lamp Lamp Recep- tacle Part No. ➁ Lens/LED Color Code Applicable Lamp Push-to-Check APN1*P Without Lamp BA9S APN199P➁ C: clear G: green O: orange R: red S: blue W: white See page 75 for lamps. Incandescent BA9S APN1➂P➁ LS-* Operating Voltage Code Specify an operating voltage code in place of ➂ in the Part No. ➂ Operating Voltage Code Input 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC Transformer Circuit Example Dimensions M L STOP START OLS Push-to-Check Pilot Light M Note: The lamp of the push-to-check pilot light is not connected to the contact terminal. To connect, refer to the diagram on the left. M3 Lamp Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screw ø35 6 23 B: 96.5 23.5 A: 62.5 Panel Thickness 0.8 to 7.5 All dimensions in mm. Push-to-Check APN1*P A: Full voltage B: Transformer (14/03/18)

ø30 Series Illuminated Pushbuttons ø30 LED Round Extended Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp Round Extended ALN2 AOLN2 ALNE2 AOLNE2 BA9S Momentary Without Lamp 1NO-1NC ALN29911DN See page 75 for lamps.2NO ALN29920DN 2NC ALN29902DN➁ LED 1NO-1NC ALN2➂11DN➁ LSTD-*➁2NO ALN2➂20DN➁ 2NC ALN2➂02DN➁ Maintained Without Lamp 1NO-1NC AOLN29911DN➁ See page 75 for lamps.2NO AOLN29920DN 2NC AOLN29902DN➁ LED 1NO-1NC AOLN2➂11DN➁ LSTD-*➁2NO AOLN2➂20DN➁ 2NC AOLN2➂02DN➁ E12 Momentary Without Lamp 1NO-1NC ALNE29911DN➁ See page 75 for lamps.2NO ALNE29920DN 2NC ALNE29902DN➁ LED 1NO-1NC ALNE2➂11DN➁ LETD-*➁2NO ALNE2➂20DN➁ 2NC ALNE2➂02DN➁ Maintained Without Lamp 1NO-1NC AOLNE29911DN➁ See page 75 for lamps.2NO AOLNE29920DN➁ 2NC AOLNE29902DN➁ LED 1NO-1NC AOLNE2➂11DN➁ LETD-*➁2NO AOLNE2➂20DN➁ 2NC AOLNE2➂02DN➁ Color Code and Operating Voltage Code ➁ Lens/LED Color Code ➂ Operating Voltage Code Input Specify a lens/LED color code in place of ➁. A: amber G: green PW: pure white (LSTD only) R: red S: blue W: white Y: yellow A pure white LED lamp is used for yellow il- lumination. 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC Transformer Dimensions 86 (4 blocks) 63 (2 blocks) 23.5 Panel Thickness 0.8 to 7.5 5.5 23 ø35 ø24 M3 Terminal Screw M3.5 Terminal Screw ø40 M3.5 Terminal Screws 97.5 (2 blocks) 120.5 (4 blocks) 923 Panel Thickness 0.8 to 7.5 ø24 ø35 23.5 ø40 100.5 (4 blocks) 77.5 (2 blocks) Panel Thickness 0.8 to 7.5 5.5 23 ø35 ø24 M3 Terminal Screw M3.5 Terminal Screw ø40 M3.5 Terminal Screws 112 (2 blocks) 135 (4 blocks) 923 Panel Thickness 0.8 to 7.5 ø24 ø35 ø40 ALN2/AOLN2 BA9S/Full Voltage ALN2/AOLN2 BA9S/Transformer ALNE2/AOLNE2 E12/Full Voltage ALNE2/AOLNE2 E12/Transformer All dimensions in mm. ø30ø30 (14/03/18)

ø30 ø30 Series Illuminated Pushbuttons Incandescent Round Extended Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp Round Extended ALN ALNE AOLN AOLNE BA9S Momentary Without Lamp 1NO-1NC ALN9911 See page 75 for lamps.2NO ALN9920 2NC ALN9902➁ Incandescent 1NO-1NC ALN➂11➁ LS-*2NO ALN➂20➁ 2NC ALN➂02➁ Maintained Without Lamp 1NO-1NC AOLN9911➁ See page 75 for lamps.2NO AOLN9920 2NC AOLN9902➁ Incandescent 1NO-1NC AOLN➂11➁ LS-*2NO AOLN➂20➁ 2NC AOLN➂02➁ E12 Momentary Without Lamp 1NO-1NC ALNE9911➁ See page 75 for lamps.2NO ALNE9920 2NC ALNE9902➁ Incandescent 1NO-1NC ALN➂11➁ LE-*2NO ALN➂20➁ 2NC ALN➂02➁ Maintained Without Lamp 1NO-1NC AOLNE9911➁ See page 75 for lamps.2NO AOLNE9920 2NC AOLNE9902➁ Incandescent 1NO-1NC AOLN➂11➁ LE-*2NO AOLN➂20➁ 2NC AOLN➂02➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens Color Code ➂ Operating Voltage Code Input Incandescent (BA9S) Incandescent (E12) Specify a lens color code in place of ➁. C: clear G: green O: orange R: red S: blue W: white 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC E66: 6V AC/DC E88: 12V AC/DC E33: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 18: 100/110V AC 128: 120V AC 238: 200/220V AC 248: 240V AC 388: 380V AC 48: 400/440V AC 488: 480V AC Transformer Dimensions M3 Terminal Screw M3.5 Terminal Screw 92.5 (4 blocks) 69.5 (2 blocks) 18.5 Panel Thickness 0.8 to 7.5 6 23 ø35 ø24.6 M3.5 Terminal Screws 103.5 (2 blocks) 126.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø24.6 ø35 18.5 114.5 (4 blocks) 91.5 (2 blocks) 18.5 Panel Thickness 0.8 to 7.5 6 23 ø35 ø24.6 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 125.5 (2 blocks) 148.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø24.6 ø35 18.5 85.5 (4 blocks) 62.5 (2 blocks) 18.5 6 23 ø35 ø24.6 Panel Thickness 0.8 to 7.5 M3 Terminal Screw M3.5 Terminal Screw 107.5 (4 blocks) 84.5 (2 blocks) 18.5 Panel Thickness 0.8 to 7.5 6 23 ø35 ø24.6 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 118.5 (2 blocks) 141.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø24.6 ø35 18.5 M3.5 Terminal Screws 96.5 (2 blocks) 119.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø24.6 ø35 18.5 ALN Momentary BA9S/Full Voltage ALN Momentary BA9S/Transformer AOLN Maintained BA9S/Full Voltage AOLN Maintained BA9S/Transformer ALNE Momentary E12/Full Voltage ALNE Momentary E12/Transformer AOLNE Maintained E12/Full Voltage AOLNE Maintained E12/Transformer (14/03/18)

ø30 Series Illuminated Pushbuttons ø30 LED Round Extended with Half Shroud Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp Round Extended ALGN2 AOLGN2 ALGNE2 AOLGNE2 BA9S Momentary Without Lamp 1NO-1NC ALGN29911DN See page 75 for lamps.2NO ALGN29920DN 2NC ALGN29902DN➁ LED 1NO-1NC ALGN2➂11DN➁ LSTD-*➁2NO ALGN2➂20DN➁ 2NC ALGN2➂02DN➁ Maintained Without Lamp 1NO-1NC AOLGN29911DN➁ See page 75 for lamps.2NO AOLGN29920DN 2NC AOLGN29902DN➁ LED 1NO-1NC AOLGN2➂11DN➁ LSTD-*➁2NO AOLGN2➂20DN➁ 2NC AOLGN2➂02DN➁ E12 Momentary Without Lamp 1NO-1NC ALGNE29911DN➁ See page 75 for lamps.2NO ALGNE29920DN 2NC ALGNE29902DN➁ LED 1NO-1NC ALGNE2➂11DN➁ LETD-*➁2NO ALGNE2➂20DN➁ 2NC ALGNE2➂02DN➁ Maintained Without Lamp 1NO-1NC AOLGNE29911DN➁ See page 75 for lamps.2NO AOLGNE29920DN 2NC AOLGNE29902DN➁ LED 1NO-1NC AOLGNE2➂11DN➁ LETD-*➁2NO AOLGNE2➂20DN➁ 2NC AOLGNE2➂02DN➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens/LED Color Code ➂ Operating Voltage Code Input Specify a lens/LED color code in place of ➁. A: amber G: green PW: pure white (LSTD only) R: red S: blue W: white Y: yellow Use a pure white LED lamp for yellow illumina- tion 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC Transformer Dimensions 82.5 (4 blocks) 59.5 (2 blocks) 27.5 Panel Thickness 0.8 to 3.5 5.5 23 ø35 ø24 ø27 M3 Terminal Screw M3.5 Terminal Screw ø40 M3.5 Terminal Screws 94 (2 blocks) 117 (4 blocks) Panel Thickness 0.8 to 3.5 ø24 ø27 ø35 27.5 ø40 M3 Terminal Screw M3.5 Terminal Screw 97 (4 blocks) 74 (2 blocks) 23.5 Panel Thickness 0.8 to 3.5 5.5 23 ø35 ø24 ø27 ø40 M3.5 Terminal Screws 108.5 (2 blocks) 131.5 (4 blocks) Panel Thickness 0.8 to 3.5 ø24 ø27 ø35 ø40 4023.5 ALGN2/AOLGN2 BA9S/Full Voltage ALGNE2/AOLGNE2 E12/Full Voltage ALGNE2/AOLGNE2 E12/Transformer ALGN2/AOLGN2 BA9S/Transformer All dimensions in mm. ø30ø30 (14/03/18)

ø30 ø30 Series Illuminated Pushbuttons Incandescent Round Extended with Half Shroud Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp Round Extended ALNG ALNEG BA9S Momentary Without Lamp 1NO-1NC ALN9G911 See page 75 for lamps.2NO ALN9G920 2NC ALN9G902➁ Incandescent 1NO-1NC ALN➂11➁ LS-*2NO ALN➂20➁ 2NC ALN➂02➁ E12 Momentary Without Lamp 1NO-1NC ALNE9G911➁ See page 75 for lamps.2NO ALNE9G920 2NC ALNE9G902➁ Incandescent 1NO-1NC ALN➂11➁ LE-*2NO ALN➂20➁ 2NC ALN➂02➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens Color Code ➂ Operating Voltage Code Input Incandescent (BA9S) Incandescent (E12) Specify a lens color code in place of ➁. C: clear G: green O: orange R: red S: blue W: white 6G6: 6V AC/DC 8G8: 12V AC/DC 3G3: 24V AC/DC E6G6: 6V AC/DC E8G8: 12V AC/DC E3G3: 24V AC/DC Full voltage 1G6: 100/110V AC 12G6: 120V AC 2G6: 200/220V AC 24G6: 240V AC 38G6: 380V AC 4G6: 400/440V AC 48G6: 480V AC 1G8: 100/110V AC 12G8: 120V AC 2G8: 200/220V AC 24G8: 240V AC 38G8: 380V AC 4G8: 400/440V AC 48G8: 480V AC Transformer Dimensions M3 Terminal Screw M3.5 Terminal Screw 81 (4 blocks) 58 (2 blocks) 23 Panel Thickness 0.8 to 4 6 23 ø35 ø24.6 ø27 M3.5 Terminal Screws 92 (2 blocks) 115 (4 blocks) Panel Thickness 0.8 to 4 ø24.6 ø27 ø35 88 (4 blocks) 65 (2 blocks) 23 Panel Thickness 0.8 to 4 6 23 ø35 ø24.6 ø27 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 99 (2 blocks) 122 (4 blocks) Panel Thickness 0.8 to 4 ø24.6 ø27 ø35 ALN*G Momentary BA9S/Full Voltage ALNE*G Momentary E16/Full Voltage ALNE*G Momentary E16/Transformer ALN*G Momentary BA9S/Transformer All dimensions in mm. (14/03/18)

ø30 Series Illuminated Pushbuttons ø30 LED Round Extended with Full Shroud Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp Round Extended ALFN2 AOLFN2 ALFNE2 AOLFNE2 BA9S Momentary Without Lamp 1NO-1NC ALFN29911DN➁ See page 75 for lamps.2NO ALFN29920DN➁ 2NC ALFN29902DN➁ LED 1NO-1NC ALFN2➂11DN➁ LSTD-*➁2NO ALFN2➂20DN➁ 2NC ALFN2➂02DN➁ Maintained Without Lamp 1NO-1NC AOLFN29911DN➁ See page 75 for lamps.2NO AOLFN29920DN 2NC AOLFN29902DN➁ LED 1NO-1NC AOLFN2➂11DN➁ LSTD-*➁2NO AOLFN2➂20DN➁ 2NC AOLFN2➂02DN➁ E12 Momentary Without Lamp 1NO-1NC ALFNE29911DN➁ See page 75 for lamps.2NO ALFNE29920DN 2NC ALFNE29902DN➁ LED 1NO-1NC ALFNE2➂11DN➁ LETD-*➁2NO ALFNE2➂20DN➁ 2NC ALFNE2➂02DN➁ Maintained Without Lamp 1NO-1NC AOLFNE29911DN➁ See page 75 for lamps.2NO AOLFNE29920DN 2NC AOLFNE29902DN➁ LED 1NO-1NC AOLFNE2➂11DN➁ LETD-*➁2NO AOLFNE2➂20DN➁ 2NC AOLFNE2➂02DN➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens/LED Color Code ➂ Operating Voltage Code Input LED Specify a lens/LED color code in place of ➁. A: amber G: green PW: pure white (LSTD only) R: red S: blue W: white Y: yellow Use a pure white LED lamp for yellow illumina- tion 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC Transformer Dimensions M3 Terminal Screw M3.5 Terminal Screw 84.5 (4 blocks) 61.5 (2 blocks) 25 Panel Thickness 0.8 to 5.5 5.5 23 ø35 ø29.5 ø40 M3.5 Terminal Screws 96 (2 blocks) 119 (4 blocks) Panel Thickness 0.8 to 5.5 ø29.5 ø35 ø40 99.5 (4 blocks) 76.5 (2 blocks) 21 Panel Thickness 0.8 to 6 5 23 ø35 ø29.5 M3 Terminal Screw M3.5 Terminal Screw ø40 M3.5 Terminal Screws 111 (2 blocks) 134 (4 blocks) Panel Thickness 0.8 to 6 ø29.5 ø35 ø40 ALFN2/AOLFN2 BA9S/Full Voltage ALFN2/AOLFN2 BA9S/Transformer ALFNE2/AOLFNE2 E12/Transformer ALFNE2/AOLFNE2 E12/Full Voltage All dimensions in mm. ø30ø30 (14/03/18)

ø30 ø30 Series Illuminated Pushbuttons Incandescent Round Extended with Full Shroud Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp Round Extended ALNF ALNEF AOLNF AOLNEF BA9S Momentary Without Lamp 1NO-1NC ALN9F911 See page 75 for lamps.2NO ALN9F920 2NC ALN9F902➁ Incandescent 1NO-1NC ALN➂11➁ LS-*2NO ALN➂20➁ 2NC ALN➂02➁ Maintained Without Lamp 1NO-1NC AOLN9F911➁ See page 75 for lamps.2NO AOLN9F920 2NC AOLN9F902➁ Incandescent 1NO-1NC AOLN➂11➁ LS-*2NO AOLN➂20➁ 2NC AOLN➂02➁ E12 Momentary Without Lamp 1NO-1NC ALNE9F911➁ See page 75 for lamps.2NO ALNE9F920 2NC ALNE9F902➁ Incandescent 1NO-1NC ALN➂11➁ LE-*2NO ALN➂20➁ 2NC ALN➂02➁ Maintained Without Lamp 1NO-1NC AOLNE9F911➁ See page 75 for lamps.2NO AOLNE9F920 2NC AOLNE9F902➁ Incandescent 1NO-1NC AOLN➂11➁ LE-*2NO AOLN➁20➁ 2NC AOLN➂02➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens Color Code ➂ Operating Voltage Code Input Incandescent (BA9S) Incandescent (E12) Specify a lens color code in place of ➁. C: clear G: green O: orange R: red S: blue W: white 6F6: 6V AC/DC 8F8: 12V AC/DC 3F3: 24V AC/DC E6F6: 6V AC/DC E8F8: 12V AC/DC E3F3: 24V AC/DC Full voltage 1F6: 100/110V AC 12F6: 120V AC 2F6: 200/220V AC 24F6: 240V AC 38F6: 380V AC 4F6: 400/440V AC 48F6: 480V AC 1F8: 100/110V AC 12F8: 120V AC 2F8: 200/220V AC 24F8: 240V AC 38F8: 380V AC 4F8: 400/440V AC 48F8: 480V AC Transformer Dimensions M3 Terminal Screw M3.5 Terminal Screw 83 (4 blocks) 60 (2 blocks) 21 Panel Thickness 0.8 to 5 6 23 ø35 ø29.5 105 (4 blocks) 82 (2 blocks) 21 Panel Thickness 0.8 to 5 6 23 ø35 ø29.5 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 116 (2 blocks) 139 (4 blocks) Panel Thickness 0.8 to 5 ø29.5 ø35 90 (4 blocks) 67 (2 blocks) 21 Panel Thickness 0.8 to 5 6 23 ø35 ø29.5 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 101 (2 blocks) 124 (4 blocks) Panel Thickness 0.8 to 5 ø29.5 ø35 112 (4 blocks) 89 (2 blocks) 21 Panel Thickness 0.8 to 5 6 23 ø35 ø29.5 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 123 (2 blocks) 146 (4 blocks) Panel Thickness 0.8 to 5 ø29.5 ø35 ALN*F Momentary BA9S/Full Voltage AOLN*F Maintained BA9S/Full Voltage ALN*F Momentary BA9S/Transformer ALON*F Maintained BA9S/Transformer ALNE*F Momentary E12/Full Voltage ALN*F Momentary E12/Transformer AOLNE*F Maintained E12/Full Voltage AOLN*F Maintained E12/Transformer All dimensions in mm. M3.5 Terminal Screws 94 (2 blocks) 117 (4 blocks) Panel Thickness 0.8 to 5 ø29.5 ø35 (14/03/18)

ø30 Series Illuminated Pushbuttons ø30 LED Mushroom (ø40) Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp ø40 Mushroom ALN3 AOLN3 ALNE3 AOLNE3 BA9S Momentary Without Lamp 1NO-1NC ALN39911DN See page 75 for lamps.2NO ALN39920DN 2NC ALN39902DN➁ LED 1NO-1NC ALN3➂11DN➁ LSTD-*➁2NO ALN3➂20DN➁ 2NC ALN3➂02DN➁ Maintained Without Lamp 1NO-1NC AOLN39911DN➁ See page 75 for lamps.2NO AOLN39920DN 2NC AOLN39902DN➁ LED 1NO-1NC AOLN3➂11DN➁ LSTD-*➁2NO AOLN3➂20DN➁ 2NC AOLN3➂02DN➁ E12 Momentary Without Lamp 1NO-1NC ALNE39911DN➁ See page 75 for lamps.2NO ALNE39920DN 2NC ALNE39902DN➁ LED 1NO-1NC ALNE3➂11DN➁ LETD-*➁2NO ALNE3➂20DN➁ 2NC ALNE3➂02DN➁ Maintained Without Lamp 1NO-1NC AOLNE39911DN➁ See page 75 for lamps.2NO AOLNE39920DN➁ 2NC AOLNE39902DN➁ LED 1NO-1NC AOLNE3➂11DN➁ LETD-*➁2NO AOLNE3➂20DN➁ 2NC AOLNE3➂02DN➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens/LED Color Code ➂ Operating Voltage Code Input Specify a lens/LED color code in place of ➁. A: amber G: green R: red S: blue W: white Y: yellow Use a pure white LED lamp for yellow illumina- tion (LSTD only) 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC Transformer Dimensions 86 (4 blocks) 63 (2 blocks) 23.5 Panel Thickness 0.8 to 7.5 5.5 23 ø40 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 97.5 (2 blocks) 120.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø40 23.5 100.5 (4 blocks) 77.5 (2 blocks) 20 Panel Thickness 0.8 to 7.5 5.5 23 ø40 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 112 (2 blocks) 135 (4 blocks) Panel Thickness 0.8 to 7.5 ø40 ALN3/AOLN3 BA9S/Full Voltage ALN3/AOLN3 BA9S/Transformer ALNE3/AOLNE3 E12/Full Voltage ALNE3/AOLNE3 E12/Transformer All dimensions in mm. ø30ø30ø30 (14/03/18)

ø30 ø30 Series Illuminated Pushbuttons Incandescent Square and Rectangular Extended Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp Square Extended ULQN UOLQN BA9S Momentary Without Lamp 1NO-1NC ULQN9911➁ See page 75 for lamps.2NO ULQN9920➁ 2NC ULQN9902➁ Incandescent 1NO-1NC ULQN➂11➁ LS-*2NO ULQN➂20➁ 2NC ULQN➂02➁ Maintained Without Lamp 1NO-1NC UOLQN9911➁ See page 75 for lamps.2NO UOLQN9920 2NC UOLQN9902➁ Incandescent 1NO-1NC UOLQN➂11➁ LS-*2NO UOLQN➂20➁ 2NC UOLQN➂02➁ Rectangular (Marking) ULQNB UOLQNB BA9S Momentary Without Lamp 1NO-1NC ULQN9B911 See page 75 for lamps.2NO ULQN9B920➁ 2NC ULQN9B902➁ Incandescent 1NO-1NC ULQN➂11➁ LS-*2NO ULQN➂20➁ 2NC ULQN➂02➁ Maintained Without Lamp 1NO-1NC UOLQN9B911➁ See page 75 for lamps.2NO UOLQN9B920 2NC UOLQN9B902➁ Incandescent 1NO-1NC UOLQN➂11➁ LS-*2NO UOLQN➂20➁ 2NC UOLQN➂02➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens Color Code ➂ Operating Voltage Code Input Square Extended Rectangular Marking Specify a lens color code in place of ➁. C: clear (square units only) G: green O: orange R: red S: blue W: white Clear lens is not available for rectangular units. 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC 6B6: 6V AC/DC 8B8: 12V AC/DC 3B3: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 1B6: 100/110V AC 12B6: 120V AC 2B6: 200/220V AC 24B6: 240V AC 38B6: 380V AC 4B6: 400/440V AC 48B6: 480V AC Transformer Dimensions M3.5 Terminal Screws 120 (2 blocks) 143 (4 blocks) Panel Thickness 0.8 to 3.2 36.4×42.4 52.2 30×36 36.4×42.4 30×36 109 (4 blocks) 86 (2 blocks) 25 Panel Thickness 0.8 to 3.2 6 23 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 98 (2 blocks) 121 (4 blocks) Panel Thickness 0.8 to 3.225 36.4×42.4 30×36 109 (4 blocks) 86 (2 blocks) 20 Panel Thickness 0.8 to 3.2 6 23 14 M3 Terminal Screw M3.5 Terminal Screws M3.5 Terminal Screws 120 (2 blocks) 143 (4 blocks) Panel Thickness 0.8 to 3.2 52.2 ULQN Momentary BA9S/Full Voltage UOLQN Maintained BA9S/Full Voltage UOLQN Maintained BA9S/ Transformer 87 (4 blocks) 64 (2 blocks) 25 Panel Thickness 0.8 to 3.2 6 23 36.4×42.4 30×36 M3 Terminal Screw M3.5 Terminal Screws 87 (4 blocks) 64 (2 blocks) 20 Panel Thickness 0.8 to 3.2 6 23 14 M3 Terminal Screw M3.5 Terminal Screw ULQN*B Momentary BA9S/Full Voltage M3.5 Terminal Screws 98 (2 blocks) 121 (4 blocks) Panel Thickness 0.8 to 3.2 ULQN*B Momentary BA9S/Transformer ULQN Momentary BA9S/Transformer UOLQN*B Maintained BA9S/Transformer UOLQN*B Maintained BA9S/Full Voltage All dimensions in mm. (14/03/18)

ø30 Series Illuminated Pushbuttons ø30 Incandescent Push Turn Lock Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp ALNL BA9S Push Turn Lock Without Lamp 1NO-1NC ALN9L911➁ See page 75 for lamps.2NO ALN9L920➁ 2NC ALN9L902➁ Incandescent 1NO-1NC ALN➂11➁ LS-*2NO ALN➂20➁ 2NC ALN➂02➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens Color Code ➂ Operating Voltage Code Input Specify a lens color code in place of ➁. G: green O: orange R: red S: blue W: white 6L6: 6V AC/DC 8L8: 12V AC/DC 3L3: 24V AC/DC Full voltage 1L6: 100/110V AC 12L6: 120V AC 2L6: 200/220V AC 24L6: 240V AC 38L6: 380V AC 4L6: 400/440V AC 48L6: 480V AC Transformer

• Push Turn Lock: Knob is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise. Dimensions 90 (4 blocks) 67 (2 blocks) 25 Panel Thickness 0.8 to 5 6 23 ø35 ø22 M3 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screws 101 (2 blocks) 124 (4 blocks) Panel Thickness 0.8 to 5 ø35 ø22 ALN*L BA9S/Full Voltage ALN*L BA9S/Transformer All dimensions in mm. ø30ø30 (14/03/18)

ø30 ø30 Series Illuminated Pushbuttons LED Pushlock Turn Reset/Push Turn Lock Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp ø40 Mushroom Pushlock Turn Reset AVLN3 AVLNE3 BA9S Pushlock Turn Reset Without Lamp 1NO-1NC AVLN39911DNR See page 75 for lamps.2NO AVLN39920DNR 2NC AVLN39902DNR LED 1NO-1NC AVLN3 ➂11DNR LSTD-*➁2NO AVLN3➂20DNR 2NC AVLN3➂02DNR E12 Pushlock Turn Reset Without Lamp 1NO-1NC AVLNE39911DNR See page 75 for lamps.2NO AVLNE39920DNR 2NC AVLNE39902DNR LED 1NO-1NC AVLNE3 ➂11DNR LETD-*➁2NO AVLNE3➂20DNR 2NC AVLNE3➂02DNR ø40 Mushroom Push Turn Lock AJLN3 BA9S Push Turn Lock Without Lamp 1NO-1NC AJLN39911DN See page 75 for lamps.2NO AJLN39920DN 2NC AJLN39902DN➁ LED 1NO-1NC AJLN3➂11DN➁ LSTD-*➁2NO AJLN3➂20DN➁ 2NC AJLN3➂02DN➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens/LED Color Code ➂ Operating Voltage Code Input Specify a lens/LED color code in place of ➁. A: amber G: green R: red W: white Y: yellow 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC Transformer

• Pushlock Turn Reset: Lens is maintained when pressed and is reset when turned clockwise. Red lens only. Note: AVNL3 and AVNLE3 pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (ISO 13850 and IEC 60947-5-5 compliant).
• Push T urn Lock: Lens is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise. Dimensions 86 (4 blocks) 63 (2 blocks) 23.5 5.5 23 Panel Thickness 0.8 to 7.5 ø40 M3 Terminal Screw M3.5 Terminal Screw 100.5 (4 blocks) 77.5 (2 blocks) 20 5.5 23 ø40 M3 Terminal Screw M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 M3.5 Terminal Screws 112 (2 blocks) 135 (4 blocks) Panel Thickness 0.8 to 7.5 ø40 86 (4 blocks) 63 (2 blocks) 23.5 Panel Thickness 0.8 to 7.5 5.5 23 ø40 M3 Terminal Screw M3.5 Terminal Screw AVLN3 BA9S/Full Voltage AVLN3 BA9S/Transformer AVLNE3 E12/Full Voltage AVLNE3 E12/Transformer AJLN3 BA9S/Full Voltage PU HS K OL C M3.5 Terminal Screws 97.5 (2 blocks) 120.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø40 23.5 M3.5 Terminal Screws 97.5 (2 blocks) 120.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø40 23.5 AJLN3 BA9S/Transformer All dimensions in mm. (14/03/18)

ø30 Series Illuminated Pushbuttons ø30 Incandescent Pushlock Turn Reset/Push Turn Lock Illuminated Pushbuttons Package Quantity: 1 Shape Lamp Recep- tacle Operation Lamp Contact Part No. Applicable Lamp ø40 Mushroom Pushlock Turn Reset AVLN3 AVLNE3 BA9S Pushlock Turn Reset Without Lamp 1NO-1NC AVLN39911NR See page 75 for lamps.2NO AVLN39920NR 2NC AVLN39902NR Incandescent 1NO-1NC AVLN3 ➂11NR LS-*2NO AVLN3➂20NR 2NC AVLN3➂02NR E12 Pushlock Turn Reset Without Lamp 1NO-1NC AVLNE39911NR See page 75 for lamps.2NO AVLNE39920NR 2NC AVLNE39902NR Incandescent 1NO-1NC AVLNE3 ➂11NR LE-*2NO AVLNE3➂20NR 2NC AVLNE3➂02NR ø40 Mushroom Push Turn Lock AJLN3 BA9S Push Turn Lock Without Lamp 1NO-1NC AJLN39911N See page 75 for lamps.2NO AJLN39920N 2NC AJLN39902N➁ Incandescent 1NO-1NC AJLN3➂11N➁ LS-*2NO AJLN3➂20N➁ 2NC AJLN3➂02N➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens Color Code ➂ Operating Voltage Code Input Incandescent (BA9S) Incandescent (E12) Specify a lens color code in place of ➁ in the Part No. G: green O: orange R: red 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC Full voltage 16: 100/110V AC 126: 120V AC 26: 200/220V AC 246: 240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC 18: 100/110V AC 128: 120V AC 238: 200/220V AC 248: 240V AC 388: 380V AC 48: 400/440V AC 488: 480V AC Transformer

• Pushlock Turn Reset: Lens is maintained when pressed and is reset when turned clockwise. Red lens only. Note: AVNL3 and AVNLE3 pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN or HN series emergency stop switches (ISO 13850 and IEC 60947-5-5 compliant).
• Push T urn Lock: Lens is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise. Dimensions 86 (4 blocks) 63 (2 blocks) 23.5 5.5 23 Panel Thickness 0.8 to 7.5 ø40 M3 Terminal Screw M3.5 Terminal Screw 100.5 (4 blocks) 77.5 (2 blocks) 20 5.5 23 ø40 M3 Terminal Screw M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 M3.5 Terminal Screws 112 (2 blocks) 135 (4 blocks) Panel Thickness 0.8 to 7.5 ø40 86 (4 blocks) 63 (2 blocks) 23.5 Panel Thickness 0.8 to 7.5 5.5 23 ø40 M3 Terminal Screw M3.5 Terminal Screw AVLN3 BA9S/Full Voltage AVLN3 BA9S/Transformer AVLNE3 E12/Full Voltage AVLNE3 E12/Transformer AJLN3 BA9S/Full Voltage PU HS K OL C M3.5 Terminal Screws 97.5 (2 blocks) 120.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø40 23.5 M3.5 Terminal Screws 97.5 (2 blocks) 120.5 (4 blocks) Panel Thickness 0.8 to 7.5 ø40 23.5 AJLN3 BA9S/Transformer All dimensions in mm. ø30ø30 (14/03/18)

ø30 ø30 Series Selector Switches ASN Selector Switches (Knob Operator) 90° 2-position Package Quantity: 1 Shape Contact Arrangement Chart Contact Code Contact Block Operator Position Maintained Spring Return from Right Maintained Spring Return from Left Mounting Position Contact L R L R L R L R L R (1NO)

1 NO ● ASN310 ASN4102 Dummy

(1NO-1NC)

1 NO ● ASN311 ASN4112 NC ●

(2NO)

1 NO ● ASN320 ASN4202 NO ●

(2NO-2NC)

1 NO ●

ASN322 ASN4222 NC ●

3 NO ●

4 NC ●

(1NO-1NC)

1 NO ASN37S (Note) ASN47S (Note)2 NC

(1NO)

1 NO ● ASN3010 ASN40102 Dummy

(1NO-1NC)

1 NO ● ASN3011 ASN40112 NC ●

(2NO)

1 NO ● ASN3020 ASN40202 NO ●

(2NO-2NC) ASN3022 ASN40222 NC ● (1NO-1NC)

1 NO ASN307S (Note) ASN407S (Note)2 NC

Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration.

• Knob: Black
• Round bezel (metal): Chrome-plated
• Units marked with  and part numbers with "-T" differ in shape. See page 48 for dimensions.
• Nameplates are ordered separately. ASN (14/03/18)

ø30 Series Selector Switches ø30 ASN Selector Switches (Knob Operator) 45° 3-position Package Quantity: 1 Shape Contact Arrangement Chart Contact Code Contact Block Operator Position Maintained Spring Return from Left Maintained Spring Return from Right Mounting Position Contact L R C C L R C L R C L R C L R (1NO-1NC)

1 NO ● *ASN111 *ASN2112 NC ●

(2NO)

1 NO ● ASN120-T ASN220-T2 NO ●

(2NO-2NC) *ASN122 *ASN2222 NO ●

3 NC ●

(4NO) ASN140-T ASN240-T2 NO ●

4 NO ●

(2NO-2NC) ASN15S  ASN25S 2 NO ● 3 NC 4 NC (2NC)

1 NC ASN17S  ASN27S 2 NC

(4NC) 1 NC ASN18S  ASN28S 2 NC 3 NC 4 NC (1NO-1NC)

1 NO ● *ASN1011 *ASN20112 NC ●

(2NC)

1 NC ● — ASN2002-T2 NC ●

(2NO-2NC) *ASN1022 *ASN20222 NC ● (4NC)

1 NC ●

— ASN2004-T2 NC ● (2NO-2NC) ASN105S  ASN205S 2 NO ● 3 NC 4 NC (2NC)

1 NC ASN107S  ASN20L7S 2 NC

(4NC) 1 NC ASN108S  ASN208S 2 NC 3 NC 4 NC ASN-T are twin-rod units. Single rods are available for the same circuit (marked with *) but different contacts are used.

• Knob: Black
• Round bezel (metal): Chrome-plated
• Units marked with and part numbers with "-T" differ in shape. See page 48 for dimensions.
• Nameplates are ordered separately. ASN ø30ø30 (14/03/18)

ø30 ø30 Series Selector Switches ASNL Selector Switches (Lever Operator) 90° 2-position Package Quantity: 1 Shape Contact Arrangement Chart ASNL • Lever: Black

• Round bezel (metal): Chrome-plated
• Units marked with  and part numbers with "-T" differ in shape. See page 48 for dimensions.
• Nameplates are ordered separately. Contact Code Contact Block Operator Position Maintained Spring Return from Right Maintained Spring Return from Left Mounting Position Contact L R L R L R L R L R (1NO)

1 NO ● ASN3L10 ASN4L102 Dummy

(1NO-1NC)

1 NO ● ASN3L11 ASN4L112 NC ●

(2NO)

1 NO ● ASN3L20 ASN4L202 NO ●

(2NO-2NC) ASN3L22 ASN4L222 NC ● (1NO-1NC)

1 NO ASN3L7S (Note) ASN4L7S (Note)2 NC

(1NO)

1 NO ● ASN30L10 ASN40L102 Dummy

(1NO-1NC)

1 NO ● ASN30L11 ASN40L112 NC ●

(2NO) ASN30L20 ASN40L202 NO ● (2NO-2NC) ASN30L22 ASN40L222 NC ● (1NO-1NC)

1 NO ASN30L7S (Note) ASN40L7S (Note)2 NC

Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration. (14/03/18)

ø30 Series Selector Switches ø30 ASNL Selector Switches (Lever Operator) 45° 3-position Package Quantity: 1 Shape Contact Arrangement Chart ASNL • Lever: Black

• Round bezel (metal): Chrome-plated
• Units marked with  and part numbers with "-T" differ in shape. See page 48 for dimensions.
• Nameplates are ordered separately. Contact Code Contact Block Operator Position Maintained Spring Return from Left Maintained Spring Return from Right Mounting Position Contact L R C C L R C L R C L R C L R (1NO-1NC)

1 NO ● *ASNL111 *ASNL2112 NC ●

(2NO)

1 NO ● ASNL120-T ASNL220-T2 NO ●

(2NO-2NC) *ASN1L22 *ASN2L222 NO ● (4NO) ASN1L40-T ASN2L40-T2 NO ● (2NO-2NC) ASN1L5S  ASN2L5S 2 NO ● 3 NC 4 NC (2NC)

1 NC ASN1L7S  ASN2L7S 2 NC

(4NC) 1 NC ASN1L8S  ASN2L8S 2 NC 3 NC 4 NC (1NO-1NC)

1 NO ● *ASN10L11 *ASN20L112 NC ●

(2NC)

1 NC ● — ASN20L02-T2 NC ●

(2NO-2NC) *ASN10L22 *ASN20L222 NC ● (4NC) — ASN20L04-T2 NC ● (2NO-2NC) ASN10L5S  ASN20L5S 2 NO ● 3 NC 4 NC (2NC)

1 NC ASN10L7S  ASN20L7S 2 NC

(4NC) 1 NC ASN10L8S  ASN20L8S 2 NC 3 NC 4 NC ASN-T are twin-rod units. Single rods are available for the same circuit (marked with *) but different contacts are used. ø30ø30 (14/03/18)

ø30 ø30 Series Selector Switches ASNK Key Selector Switches 90° 2-position Package Quantity: 1 Shape Contact Arrangement Chart

• Cylinder: Chrome-plated
• Round bezel (metal): Chrome-plated
• On the spring-returned, the keys can be released only from the maintained position. On the maintained, the key can be released from every position. Key retained positions are also available. See page 21 .
• Key selector switch is supplied with two standard keys. Two different keys are available upon request.
• Part numbers with "-T" differ in shape.
• See page 48 for dimensions.
• Nameplates are ordered separately. ASNK Contact Code Contact Block Operator Position Maintained Spring Return from Right Maintained Spring Return from Left Mounting Position Contact L R L R L R L R L R (1NO)

1 NO ● ASN3K10-T

*ASN3K10 ASN4K10-T *ASN4K102 — — (1NO-1NC)

2 NO ● ASN3K11-T

*ASN3K11 ASN4K11-T *ASN4K112 NC ● (2NO)

1 NO ● ASN3K20-T

*ASN3K20 ASN4K20-T *ASN4K202 NO ● (2NO-2NC) *ASN3K22 ASN4K22-T *ASN4K22 NC ● (1NO-1NC)

1 NO ASN3K7S-T

*ASN3K7S (Note) ASN4K7S-T *ASN4K7S (Note)2 NC (1NO) *ASN30K10 *ASN40K102 — — (1NC)

1 NC ● — ASN40K01-T2 — —

(1NO-1NC) *ASN30K11 ASN40K11-T *ASN40K112 NO ● (2NO) *ASN30K20 ASN40K202 NC ● (2NC)

1 NC ● — ASN40K02-T2 NC ●

(2NO-2NC) *ASN30K22 ASN40K22-T *ASN40K22 NO ● (1NO-1NC) 1 NO *ASN30K7S (Note) ASN40K7S-T *ASN40K7S (Note)2 NC Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration. (14/03/18)

ø30 Series Selector Switches ø30 ASNK Key Selector Switches 45° 3-position Package Quantity: 1 Shape Contact Arrangement Chart

• Cylinder: Chrome-plated
• Round bezel (metal): Chrome-plated
• On the spring-returned types, the keys can be released only from the maintained position. On the maintained types, the key can be released from every position. Key retained positions are also available. See page 21.
• Key selector switch is supplied with two standard keys. Two different keys are available upon request.
• See page 48 for dimensions.
• Nameplates are ordered separately. ASNK Contact Code Contact Block Operator Position Maintained Spring Return from Left Maintained Spring Return from Right Mounting Position Contact L C R C L R C L R C L R C L R (1NO-1NC)

1 NO ● *ASN1K11 *ASN2K112 NC ●

(2NO)

1 NO ● ASN1K20-T ASN2K20-T2 NO ●

(2NO-2NC) *ASN1K22 *ASN2K222 NC ● (2NO) ASN1K40-T ASN2K40-T2 NO ● (2NO-2NC) *ASN1K5S *ASN2K5S2 NC ● 3 NO 4 NC ASN1K5S-T ASN2K5S-T2 NO ● 3 NC 4 NC (2NC)

1 NO *ASN1K7S *ASN2K7S2 NC

1 NC ASN1K7S-T ASN2K7S-T2 NC

(4NC) 1 NO *ASN1K8S *ASN2K8S2 NC 3 NO 4 NC 1 NC ASN1K8S-T ASN2K8S-T2 NC 3 NC 4 NC (1NO-1NC)

1 NO ● *ASN10K11 *ASN20K112 NC ●

(2NC)

1 NC ● — ASN20K02-T2 NC ●

(2NO-2NC) *ASN10K22 *ASN20K222 NC ● (4NC) — ASN20K04-T2 NC ● (2NO-2NC) *ASN10K5S *ASN20K5S 2 NC ● 3 NO 4 NC — ASN20K5S-T2 NO ● 3 NC 4 NC (2NC)

1 NO *ASN10K7S *ASN20K7S 2 NC

1 NC — ASN20K7S-T2 NC

(4NC) 1 NO *ASN10K8S *ASN20K8S 2 NC 3 NO 4 NC 1 NC — ASN20K8S-T2 NC 3 NC 4 NC ASN-T are twin-rod units. Single rods are available for the same circuit (marked with *) but different contacts are used. ø30ø30 (14/03/18)

ø30 ø30 Series Selector Switches Dimensions Knob Operator Lever Operator Key Selector 54 (1 or 2 blocks) 77 (3 or 4 blocks) ø35 22 22 24.5 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 90° 45° 45° All dimensions in mm. M3.5 Terminal Screw 80 (3 or 4 blocks) 57 (1 or 2 blocks) 6 23 Panel Thickness 0.8 to 7.5ɹ ɹ ø35 16.5 40 45° 45° Dimensions of key selector switches marked with "-T" in the Part No. Contact Block Mounting Position and Contact Arrangement Chart 6 23 54 (1 or 2 blocks) 77 (3 or 4 blocks) ø35 45°45° 90° M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 6 23 ø35 58 (1 or 2 blocks) 81 (3 or 4 blocks) 45°45°M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 Dimensions of knob operator marked with  or "-T" in the Part No. M3.5 Terminal Screw 54 (1 or 2 blocks) 77 (3 or 4 blocks) Panel Thickness 0.8 to 7.5 45° 45° 90° ø3525.0 40 6 23 58 (1 or 2 blocks) 81 (3 or 4 blocks) ø3525.0 26.5 45°45°M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 Dimensions of lever operator marked with  or "-T" in the Part No. L C R

2 NO ●

(14/03/18)

ø30 Series Selector Switches ø30 ASTN Selector Switches (Knob Operator) Package Quantity: 1 No. of Positions Shape Contact Arrangement Chart ASTN • Knob operator: Black

• Round bezel (metal): Chrome-plated 90° 2-position Contact Code Contact Block Operator Position Maintained Spring Return from Right — — Mounting Position Contact L R L R L R — — (1NO-1NC)

1 NO ● ASTN3211 ASTN4211

— —

2 NC ●

(2NO-2NC) ASTN3222 ASTN42222 NO ● 45° 3-position Contact Code Contact Block Operator Position Maintained Spring Return from Left Spring Return from Right Spring Return Two-way Mounting Position Contact L C R C L R C L R C L R C L R (2NO)

1 NO ● — — — ASTN51202 NO ●

(2NO-2NC) ASTN1122 ASTN2122 ASTN20122 ASTN51222 NO ● 3 NC 4 NC (2NO-2NC)

1 NO ● ●

ASTN1222 ASTN2222 ASTN20222 ASTN52222 NO ● (4NC) ASTN1340 — — —2 NO ● (2NO-2NC) ASTN1422 — ASTN20422 —2 NC 3 NC (2NO)

1 NO ● ASTN1520 — ASTN20520 —2 NO ●

(4NO) ASTN1540 — ASTN20540 —2 NO ● (1NO-1NC)

1 NC ● ASTN1611 — — —2 NO ●

(2NO-2NC) ASTN1622 — — —2 NO ● (1NO-1NC)

1 NO ● — — — ASTN51112 NC

Notes: 1. The operator of the 2­way spring return unit may slightly deviate from the center position. Turn the operator to each position accurately. ø35 62 3 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 81 (4 blocks) 58 (2 blocks) 90° 45° 45° L C R Contact Block Mounting Position and Contact Arrangement Chart Dimensions ø30ø30 (14/03/18)

ø30 ø30 Series Selector Switches ASTNL Selector Switches (Lever Operator) Package Quantity: 1 No. of Positions Shape Contact Arrangement Chart ASTNL • Lever operator: Black

• Round bezel (metal): Chrome-plated 90° 2-position Contact Code Contact Block Operator Position Maintained Spring Return from Right — — Mounting Position Contact L R L R L R — — (1NO-1NC)

1 NO ● ASTN32L11 ASTN42L11

— — (2NO-2NC) ASTN32L22 ASTN42L222 NO ● 45° 3-position Contact Code Contact Block Operator Position Maintained Spring Return from Left Spring Return from Right Spring Return Two-way Mounting Position Contact L C R C L R C L R C L R C L R (2NO)

1 NO ● — — — ASTN51L202 NO ●

(2NO-2NC) ASTN11L22 ASTN21L22 ASTN201L22 ASTN51L222 NO ● 3 NC 4 NC (2NO-2NC) ASTN12L22 ASTN22L22 ASTN202L22 ASTN52L222 NO ● (4NC) ASTN13L40 — — —2 NO ● (2NO-2NC) ASTN14L22 — ASTN204L22 —2 NC 3 NC (2NO)

1 NO ● ASTN15L20 — ASTN205L20 —2 NO ●

(4NO) ASTN15L40 — ASTN205L40 —2 NO ● (1NO-1NC)

1 NC ● ASTN16L11 — — —2 NO ●

(2NO-2NC) ASTN16L22 — — —2 NO ● (1NO-1NC)

1 NO ● — — — ASTN51L112 NC

Notes: 1. The operator of the 2­way spring return unit may slightly deviate from the center position. Turn the operator to each position accurately. L C R Contact Block Mounting Position and Contact Arrangement Chart Dimensions 6 23 ø35 25.0 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 58 (1 or 2 blocks) 81 (4 blocks) 90° 45° 45° (14/03/18)

ø30 Series Selector Switches ø30 ASTNK Key Selector Switches Package Quantity: 1 No. of Positions Shape Contact Arrangement Chart 90° 2-position Contact Code (ASTN) Contact Block Operator Position Maintained Spring Return from Right — — Mounting Position Contact L R L R L R — — (1NO-1NC)

1 NO ● ASTN32K11 ASTN42K11

— — (2NO-2NC) ASTN32K22 ASTN42K222 NO ● 45° 3-position Contact Code (ASTN) Contact Block Operator Position Maintained Spring Return from Left Spring Return from Right Spring Return Two-way Mounting Position Contact L C R C L R C L R C L R C L R (2NO)

1 NO ● — — — ASTN51K202 NO ●

(2NO-2NC) ASTN11K22 ASTN21K22 ASTN201K22 ASTN51K222 NO ● 3 NC 4 NC (2NO-2NC) ASTN12K22 ASTN22K22 ASTN202K22 ASTN52K222 NO ● (4NC) ASTN13K40 — — —2 NO ● (2NO-2NC) ASTN14K22 — ASTN204K22 —2 NC 3 NC (2NO)

1 NO ● ASTN15K20 — ASTN205K20 —2 NO ●

(4NO) ASTN15K40 — ASTN205K40 —2 NO ● (1NO-1NC)

1 NC ● ASTN16K11 — — —2 NO ●

(2NO-2NC) ASTN16K22 — — —2 NO ● (1NO-1NC)

1 NO ● — — — ASTN51K112 NC

Notes: 1. The operator of the 2­way spring return unit may slightly deviate from the center position. 2. Turn the operator to each position accurately. 80 (4 blocks) 57 (1 or 2 blocks) 6 23 ø35 16.5 40 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 45° 45° L C R Contact Block Mounting Position and Contact Arrangement Chart Dimensions ASTNK

• Cylinder: Chrome-plated
• Round bezel (metal): Chrome-plated
• On the spring-returned, the keys can be released only from the maintained position.
• On the maintained, the key can be released from every position. Key retained positions are also available. See page 21. ø30ø30 (14/03/18)

ø30 ø30 Series Illuminated Selector Switches ASLN Illuminated Selector Switches 90° 2-position Package Quantity: 1 Shape Contact Arrangement Chart ASLN (Base BA9S) Contact Code Contact Block Operator Position Lamp Maintained L R Spring Return from Right L R Spring Return from Left L R Mounting Position Con- tact L R (1NO-1NC)

1 NO ● Without Lamp ASLN29911N➁ ASLN219911N➁ ASLN229911N➁ *

2 NC ● LED ASLN2➂11DN➁ ASLN21➂11DN➁ ASLN22➂11DN➁ *

Incandescent ASLN2➂11N➁ ASLN21➂11N➁ ASLN22➂11N➁* (2NO)

1 NO ● Without Lamp ASLN29920N➁ ASLN219920N➁ ASLN229920N➁*

2 NO ● LED ASLN2➂20DN➁ ASLN21➂20DN➁ ASLN22➂20DN➁*

Incandescent ASLN2➂20N➁ ASLN21➂20N➁ ASLN22➂20N➁* (2NO-2NC) Without Lamp ASLN29922N➁ ASLN219922N➁ ASLN229922N➁ *2 NC ● LED ASLN2➂22DN➁ ASLN21➂22DN➁ ASLN22➂22DN➁ *4 NC ● Incandescent ASLN2➂22N➁ ASLN21➂22N➁ ASLN22➂22N➁ * Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens/LED Color Code ➂ Operating Voltage Code Input LED Incandescent LED Incandescent A: amber G: green R: red S: blue W: white Y: yellow Use a pure white LED lamp for yellow illumination amber G: green R: red S: blue W: white 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC Full voltage 16: 100/110V AC 136: 120V AC 26: 200/220V AC 256: 240V AC 386: 380V AC 46: 400/440V AC 16: 100/110V AC 136: 120V AC 26: 200/220V AC 256: 240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC Transformer On the 2-position selector switches marked with * above, the contact operation is reversed as follows. [Example] L R ø40 235.5 ø35 ø25 M3.5 Terminal Screws M3 Terminal Screw 63 (2 blocks) A: 86 (4 blocks) B: 97.5 (2 blocks), 120.5 (4 blocks) Panel Thickness 0.8 to 7.5 (including nameplate) 90° 45° 45° Contact Block Mounting Position and Contact Arrangement Chart Dimensions A: Full voltage B: Transformer (14/03/18)

ø30 Series Illuminated Selector Switches ø30 ASLN Illuminated Selector Switches 45° 3-position Package Quantity: 1 Contact Code Contact Block Operator Position Lamp Maintained C L R Spring Return from Right C L R Spring Return from left C L R Spring Return Two-way C L R Mounting Position Con- tact L C R (2NO)

1 NO ● Without Lamp ASLN39920N➁ ASLN319920N➁ ASLN329920N➁ ASLN339920N➁

2 NO ● LED ASLN3➂20DN➁ ASLN31➂20DN➁ ASLN32➂20DN➁ ASLN33➂20DN➁

Incandescent ASLN3➂20N➁ ASLN31➂20N➁ ASLN32➂20N➁ ASLN33➂20N➁ (2NC)

1 NC Without Lamp ASLN39902N➁ ASLN319902N➁ ASLN329902N➁ ASLN339902N➁

2 NC LED ASLN3➂02DN➁ ASLN31➂02DN➁ ASLN32➂02DN➁ ASLN33➂02DN➁

Incandescent ASLN3➂02N➁ ASLN31➂02N➁ ASLN32➂02N➁ ASLN33➂02N➁ (2NO-2NC)

1 NO ● Without Lamp ASLN39922N➁ ASLN319922N➁ ASLN329922N➁ ASLN339922N➁2 NO ●

3 NC LED ASLN3➂22DN➁ ASLN31➂22DN➁ ASLN32➂22DN➁ ASLN33➂22DN➁4 NC

Incandescent ASLN3➂22N➁ ASLN31➂22N➁ ASLN32➂22N➁ ASLN33➂22N➁ (4NO)

1 NO ● Without Lamp ASLN39940N➁ ASLN319940N➁ ASLN329940N➁ ASLN339940N➁2 NO ●

3 NO ● LED ASLN3➂40DN➁ ASLN31➂40DN➁ ASLN32➂40DN➁ ASLN33➂40DN➁4 NO ●

Incandescent ASLN3➂40N➁ ASLN31➂40N➁ ASLN32➂40N➁ ASLN33➂40N➁ (4NC)

1 NC Without Lamp ASLN39904N➁ ASLN319904N➁ ASLN329904N➁ ASLN339904N➁2 NC

3 NC LED ASLN3➂04DN➁ ASLN31➂04DN➁ ASLN32➂04DN➁ ASLN33➂04DN➁4 NC

Incandescent ASLN3➂04N➁ ASLN31➂04N➁ ASLN32➂04N➁ ASLN33➂04N➁ Color Code and Operating Voltage Code Specify a code in place of ➁ or ➂ in the Part No. ➁ Lens/LED Color Code ➂ Operating Voltage Code Input LED Incandescent LED Incandescent A: amber G: green R: red S: blue W: white Y: yellow Use a pure white LED lamp for yellow illumi- nation amber G: green R: red S: blue W: white 66: 6V AC/DC 11: 12V AC/DC 22: 24V AC/DC 66: 6V AC/DC 88: 12V AC/DC 33: 24V AC/DC Full voltage 16: 100/110V AC 136: 120V AC 26: 200/220V AC 256: 240V AC 386: 380V AC 46: 400/440V AC 16: 100/110V AC 136: 120V AC 26: 200/220V AC 256: 240V AC 386: 380V AC 46: 400/440V AC 486: 480V AC Transformer L C R ø40 235.5 ø35 ø25 M3.5 Terminal Screws M3 Terminal Screw 63 (2 blocks) A: 86 (4 blocks) B: 97.5 (2 blocks), 120.5 (4 blocks) Panel Thickness 0.8 to 7.5 (including nameplate) 90° 45° 45° Contact Block Mounting Position and Contact Arrangement Chart Dimensions A: Full Voltage B: Transformer ø30 (14/03/18)

ø30 ø30 Series Selector Pushbuttons ABN Ring Operator / ABNL Lever Operator Selector Pushbuttons Package Quantity: 1 Shape Contact Code Circuit Code Contact Block Ring/Lever Ring Operator Lever Operator ➀ Button Color Code Pushbutton Part No. Part No.Mounting Position Con- tact Normal Push Normal Push ABN M3.5 Terminal Screw 6 23 41 25 40 ø28 ø35 Panel Thickness 0.8 to 7.5 (including nameplate) M3.5 Terminal Screw 6 23 41 25 40 ø28 ø35 Panel Thickness 0.8 to 7.5 (including nameplate) ABNL 62 3 41 40 ø35 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 (including nameplate) 41 40 ø35 506 23 23 M3.5 Terminal Screw Panel Thickness 0.8 to 7.5 (including nameplate) Ring Operator (90° 2-position) Lever Operator (90° 2-position) (1NO-1NC) A 1 NO ● ● ABN6111➀ ABN6L111➀ B: black G: green R: red Y: yellow I 1 NC ● ABN6411➀ ABN6L411➀2 NO ● G 1 NO Blocked ABN9111➀ ABN9L111➀2 NC ● ● (2NO) D 1 NO ● ABN7120➀2 NO ● (2NO-2NC) B ABN6122➀ ABN6L122➀

3 NO ● ●

4 NO ● ●

C ABN6222➀ ABN6L222➀ 2 NC I ABN6422➀ ABN6L422➀ D ABN7122➀ ABN7L122➀ E 1 NC ABN7222➀ ABN7L222➀ 2 NC F ABN7322➀ ABN7L322➀ H ABN9122➀ ABN9L122➀

2 NC ● ●

• Specify a button color code in place of ➀ in the Part No.
• Ring/Lever (metal): Chrome-plated Notes 1. Circuit Codes A, B, C, and I: When the ring or lever operator is turned, the button is pushed in. Circuit Codes E and F: The right and left NC contact blocks on circuit code E or F may overlap each other while turning the ring or lever operator. The NO and NC contact blocks on circuit code F may overlap each other while pressing the button. 3. Circuit Codes G and H: The pushbutton does not operate when the ring or lever operator is turned to the left position. When using the selector pushbutton, do not turn the ring or lever operator with the pushbutton depressed. Otherwise, damage or failure may be caused. 80Normal Push 1 ● 2 ● 3 ● 4 ● Contact Block Mounting Position and Contact Arrangement Chart Mounting Hole Layout Ring Operator Lever Operator (14/03/18)

ø30 Series Accessories and Replacement Parts ø30 Terminal Covers Terminal Cover ø30 Series Switches & Pilot Lights N-VL2 N-VL3 N-VL4 APN-PVL APD-PVL Use of termi- nal covers increases the depth by the dimensions below Terminal Cover Pilot Light APN, APNE, UPQN, UPQNE Full Voltage X +5.0 mm Pilot Light APD, APDE X +5.2 mm Pilot Light APN, APNE, APD, APDE, UPQN, UPQNE Transformer DC-DC Converter X +2.7 mm Pushbutton ABN, ABD, AON, AOD, AVN, ABGD, AJN, ABFD, ATN, AOFD, UBQN, AVD, UOQN, AJD, UWQN, AZD, ABBN, AYD, ABBS (ø25) Selector Switch ASN, ASD, ASTN Selector Pushbutton ABN, ASBD 1 contact block X +0 mm 2 contact blocks X 2 pieces 3 contact blocks X 2 pieces 4 contact blocks X 2 pieces Illuminated Pushbutton ALN, ALD, ALNE, ALDE, AOLN, AOLD, AOLNE, AOLDE, ALGN, ALGD, ALGNE, ALGDE, AOLGN, AOLGDE, ALFN, ALFD, ALFNE, ALFDE, AOLFN, AOLFD, AOLFNE, AOLFDE, AVLN, AVLD, AVLNE, AVLDE, AJLN, AJLD, AJLNE, AJLDE, ULQN, UOLQN Illuminated Selector Switch ASLN, ASLD Push-to-Check Pilot Light APN1∗∗P Full Voltage X 2 pieces +4.5 mm Transformer DC-DC Converter X +1.5 mm Ordering Terminal Covers

• When or dering t erminal co vers, specify the P art No . and the quantit y. 38.4H × 22W 38H × 30.4W 38.4H × 24W 38H × 46W 37H × 44W Terminal Cover CB CB CB CB CB CB CB CB CB CB Terminal Cover (N-VL2)Terminal Cover (N-VL2) ø30 (14/03/18)

ø30 ø30 Series Accessories and Replacement Parts Nameplates Model Legend Material Part No. Ordering No. Package Quantity Dimensions (mm) Applicable Unit NA Blank Aluminium 1.2 mm thick White letters on black background NA-0 NA-0 1 ø30.5 24.5 R17.5 ø30.5 24.5 R17.5 ø30 switches & pilot lights NA-0PN10 10 With Legend NA-∗ NA-∗ 1 NA-∗PN10 10 NALO Blank Aluminium 1.2 mm thick Black NALO NALO 1 ø30.5 47.5 R17.5 NALOPN10 10 MLO Blank Brass (chrome-plated) 1.0 mm thick Matte MLO MLO 1 29.3 ø30.5 ø43 Letters should not be engraved within this line ARN/ARNS Mono-Lever MLOPN10 10 CQ Blank Aluminium 0.5 mm thick White letters on black background CQ-0 CQ-0 1

• With adhesive tapes on the back UCSQO Cam Switch CQ-0PN10 10 With Legend (Legend Codes 31 and 53 only) CQ-∗ CQ-∗ 1 CQ-∗PN10 10 CQM Blank Aluminium 0.5 mm thick White letters on black background CQM-0 CQM-0 1
• With adhesive tapes on the back UCSQM Cam Switch CQM-0PN10 10 With Legend (Legend Code 31 only) CQM-∗ CQM-∗ 1 CQM-∗PN10 10
• Specify a legend code in place of ∗ in the Or dering No 20ø13 2-ø3.5 2-ø3.5 ø13 (14/03/18)

ø30 Series Accessories and Replacement Parts ø30 Nameplates Model Legend Material Part No. Ordering No. Package Quantity Dimensions (mm) Applicable Unit CQN Blank Aluminium 0.5 mm thick White letters on black background CQN-0 CQN-0 1

• With adhesive tapes on the back ACSNO, ACSNK Cam Switches ø30 mm Selector Switches CQN-0PN10 10 With Legend (Legend Codes 31, 35, and 53 only) CQN-∗ CQN-∗ 1 CQN-∗PN10 10 CQS Blank Aluminium 0.5 mm thick White letters on black background CQS-0 CQS-0 1
• With adhesive tapes on the back ACSSO, ACSSK Cam Switches ø25 mm Selector Switches CQS-0PN10 10 With Legend (Legend Code 53 only) CQS-∗ CQS-∗ 1 CQS-∗PN10 10
• Specify a legend code in place of ∗ in the Or dering No ø30.5 ø25.5 Legends Code Legend 0 (blank) 1 ON

2 OFF

3 START

4 STOP

31 OFF-ON

35 HAND-AUTO

53 HAND-OFF-AUTO

518.5 36 22 1018.5 36 22 Shape and Engraving Area Standard Large Type NA Type NALO Example Shape Engraving Area Max. No. of Lines No. of Letters on 1 LineHeight Width Standard 5 36 1 14 Large 10 36 2 14 The above example is when the letter is 4 mm tall. ø30 (14/03/18)

ø30 ø30 Series Accessories and Replacement Parts Accessories Shape Material Part No. Ordering No. Package Quantity Dimensions (mm) Locking Ring Wrench Rubber OR-12 OR-12 1

• Used to tighten the locking ring when installing the ø30 or ø25 switch onto a panel. ø37 ø45 ø46 ø34 ø30 ø29ø26ø22 ø30 Seriesø25 Series Lamp Holder Tool Rubber OR-55 OR-55 1
• Used to install and remove the LED/incandes- cent lamps. See page 75 Contact Rubber Boot For momentary 1 layer of contact blocks (2 contact blocks) Rubber (nitryl) (black) OC-99 OC-99 1
• Rubber boot used to prevent oil and dirt from entering into the contact block.
• Temperature range: –5 to +60°C
• Cannot be used for zinc diecast switches & pilot lights. 18 42 Contact Rubber Boot For 1 layer of contact blocks (2 contact blocks) Rubber (translucent) OC-90 OC-90 1
• Applicable to AVN3 and AJN3.
• Applicable to ø30 diecast zinc pushbuttons and selector switches. (65.4) 38.8 42.8 42.4 For 2 layers of contact blocks (4 contact blocks) OC-290 OC-290 1 Anti-rotation Ring Metal OGL-11 OGL-11PN10 10
• Used to prevent the operator from turning. Generally used when using no nameplates on selector switches and selector pushbuttons. ø30.5 ø39 2.80 .8 Rubber Mounting Hole Plug Rubber (black) OB-13B OB-13BPN05 5
• Used to plug unused ø30mm mounting holes.
• Gray also available. Ordering No.: OB-13PN05 ø30 ø34 ø40
• Used to plug unused ø30mm mounting holes.
• Gray also available. Ordering Type No.: OB-13PN05 Plastic Mounting Hole Plug Plastic (gray) OBP-11 OBP-11 1
• Tightening torque: 1.2 N· m.
• Degree of pr otection: IP65 Locking Ring ø36 524M30P1.5 Screw Metallic Mounting Hole Plug Metal (diecast) (zinc-plated) OB-11 OB-11 1
• Tightening torque: 1.2 N· m.
• Degree of pr otection: IP65 30 5 ø36 Locking Ring M30P1.5 Screw ø11.6 OR-55 (14/03/18)

ø30 Series Accessories and Replacement Parts ø30 Accessories Shape Material Part No. Ordering No. Package Quantity Dimensions (mm) Button Cover for Extended Pushbuttons Rubber (nitryl) Color Part No. – – M30P1.5 ø38 ø28

• Metallic bezels cov ered with a rubber boot to enhance w aterproof charact eristics.
• Button is not included. Applicable t o e xtended pushbut tons onl Black OC-11B OC-11B Green OC-11R OC-11R Red OC-11G OC-11G Yellow OC-11Y OC-11Y Button Clear Boot For flush pushbuttons Rubber (EPDM) OC-121 OC-121 1
• Used to cover and pro tect pushb uttons where units ar e subject to w ater splash. Not suit able f or outdoor use or wher e the units ar e sub ject t o oil splash. A B A B OC-121 37 16 OC-122 37 16 For extended pushbuttons OC-122 OC-122 1 Dust-proof Rubber Cover for Jumbo Mushrooms Rubber (nitryl) black OC-4GN OC-4GN 1 ø80 Panel Thickness 1.2 to 5.5
• Used for ABN4G pushbuttons. Padlock Cover Polyarylate (gasket: nitryl rubber) OL-KL1 OL-KL1 1
• Used to protect pushbuttons, illuminated push- buttons, and selector switches (knob operator). Metal Protector Metal (zinc-plated) OL-C OL-C 1
• Used to protect flush pushbuttons from inadvert ent operation.
• Can be easily attached using the locking ring. Mounting Centers 50 min. 25 5 ø30.5 11.5 1.6 42.5 Locking Attachmentt Metal (zinc-plated) OL-H OL-H 1
• Used to lock an extended pushbutton in the depressed position.
• Can be easily attached using the locking ring. ø6 holeLocking Plate Mounting Plate 16.5 9.5 Waterproof Rubber Gasket 0.5t Key Hole ø8 ø50 ø30.2 29.5 R66.5 Panel Thickness 0.8 to 3.2 82.5 ø30 (14/03/18)

ø30 ø30 Series Accessories and Replacement Parts Maintenance Parts Shape Specification Part No. Ordering No. Package Quantity Remarks Metallic Bezel Metal (zinc diecast: chrome- plated) OG-11 OG-11PN02 2

• Cannot be used with pin lock, selector pushbuttons, and mono- lever units. Plastic Bezel Plastic (polycarbonate) OGP-11∗ OGP-11∗PN02 2 Specify a color code in place of ∗. B (black), G (green), R (red), W (white), Y (yellow)
• Cannot be used with pin lock, selector pushbuttons, and mono- lever units. Clear Plastic Bezel for Flush Pushbuttons Clear Plastic (acrylic) OGP-13 OGP-13PN02 2
• Clear plastic bezel and full shroud.
• OGP-1411 cannot be used with LED illumination units and diecast units. Clear Plastic Bezel for Extended Pushbuttons OGP-14 OGP-14PN02 2 Clear Plastic Bezel for Illuminated Pushbuttons OGP-1411 OGP-1411 1 Metal Bezel for Illuminated Pushbuttons Metal (zinc diecast) OL-11 OL-11PN05 5 Clear Button Cover Clear Plastic (polycarbonate) ABN1B-C ABN1B-CPN05 5
• Used on flush and extended pushbut tons to indicate a mark or a symbol engraved on the mark- ing plate. The clear button cover holds the marking plate. The ø30 series marking chip can only be used on the ABN1 and AON1.
• Specify a color code in place of B (black), G (green), R (red), W (white), Y (yellow) Marking Plate Plastic (polyacetal) TN-0∗ TN-0∗PN10 10 (14/03/18)

ø30 Series Accessories and Replacement Parts ø30 Maintenance Parts Shape Description Mate- rial Part No. Ordering No. Package Quantity Color Contact Block (BS: Dark gray) 1NO contact BS010E BS010E 1 • Push rod color: Green

• -MAU has gold contactsBS010E-MAU BS010E-MAU 1NC contact BS001E BS001E 1 • Push rod color: Red
• -MAU has gold contactsBS001E-MAU BS001E-MAU EM contact (early make) BS010SE BS010SE
• Push rod color: Black
• -MAU has gold contactsBS010SE-MAU BS010SE-MAU LB contact (late break) BS001SE BS001SE
• Push rod color: White
• -MAU has gold contactsBS001SE-MAU BS001SE-MAU Contact Block (BST: Light gray) 1NO contact BST010 BST010 1 • Push rod color: Green
• -MAU has gold contacts Applicable Units:
• Pushlock Turn Reset
• Push Turn Lock
• LED Illuminated Pushbutton
• LED Illuminated Selector Switch
• Incandescent Illumi nated Selector Switch BST010-MAU BST010-MAU 1NC contact BST001 BST001 1 • Push rod color: RedBST001-MAU BST001-MAU EM contact (early make) BST010S BST010S 1 • Push rod color: Black LB contact (late break) BST001S BST001S 1 • Push rod color: White Lens ➊ Used for APN(E)1 Plastic APN106LN-➁ APN106LN-➁PN05 5 A (amber), C (clear), G (green), R (red), S (blue), W (white), Y (yellow)
• Use the white (W) lens for pure white illumination ➋ Used for UPQNE4 U(O)LQN∗B UPQN406L-➁ UPQN406L-➁PN05 C (clear), G (green), R (red), S (blue)
• Use the clear (C) lens for white illumi nation. UPQN406LD-➁ UPQN406LD-➁PN05 A (amber), Y (yellow)
• Use the amber (A) lens for orange illu mination. ➌ Used for UPQN3B U(O)LQN ULQN06L-➁ ULQN06L-➁PN05 C (clear), G (green), R (red), S (blue) UPQN06LD-➁ UPQN06LD-➁PN05 A (amber), W (white), Y (yellow)
• Use the amber (A) lens for orange illu mination. Lens ➊ Used for ALN, AOLN (LED) Plastic ALN2L-➁ ALN2L-➁PN05 5 G (green), R (red), S (blue) ALN2LD-➁ ALN2LD-➁PN05 5 A (amber), W (white), Y (yellow)
• Use the white (W) lens for pure white illumination ➋ Used for ALN, AOLN (incandescent) (1W) ALN06L- ➁ ALN06L-➁PN05 5 C (clear), G (green), R (red), S (blue) ALN06LD-➁ ALN06LD-➁PN05 5 A (amber), W (white)
• Use the amber (A) lens for orange illu mination. ➌ Used for ALN, AOLN (incandescent) (2W) ALN08L- ➁ ALN08L-➁PN05 5 C (clear), G (green), R (red), S (blue) ALN08LD-➁ ALN08LD-➁PN05 5 A (amber), W (white)
• Use the amber (A) lens for orange illu mination. Button Flush Plastic ABN1B-➀ ABN1B-➀PN05 5 G (green), R (red), Y (yellow) Above colors are used for ø30 switches & pilot lights (dark colored operator units). For black, use black buttons from light colored operator units. Extended ABN2B-➀ ABN2B-➀PN05 5 Mushroom ABN3B-➀ ABN3B-➀PN02 2 Button Flush ABN1BN-➀ ABN1BN-➀PN05 5 B (black), G (green), R (red), S (blue), Y (yellow), W (white) Above colors are used for ø30 diecast zinc switches & pilot lights (light colored operator units). Extended ABN2BN-➀ ABN2BN-➀PN05 5 Mushroom ABN3BN-➀ ABN3BN-➀PN02 2 Button ➊ Mushroom (ABN4) Plastic ABN4B-➀ ABN4B-➀ 1 B (black), G (green), R (red), Y (yellow) ➋ Mushroom (ABN4G/ ABN4F) ABN4GB-➀ ABN4GB-➀ 1 ➌ Square Flush (UBQN1) UBQN1B-➀ UBQN1B-➀PN02 2 ➍ Square Extended (UBQN2) UBQN2B- ➀ UBQN2B-➀PN02 2 Note: Specify a button color code or lens color code in place of ➀ or ➁ in the Ordering No. ➊ ➋ ➌ ➍ ø30 (14/03/18)

ø30 ø30 Series Accessories and Replacement Parts Maintenance Parts Shape Description Material Part No. Ordering No. Package Quantity Remarks Button For ø40 pushlock turn reset pushbuttons (for AVN3) AS resin AVN3B-➁ AVN3B-➁ 1 R (red), Y (yellow) Lens For ø40 pushlock turn reset pushbuttons (for AVLN3, AVLNE3) AS resin AVLN3L-R AVLN3L-RPN02 2 Red only Lens For ø40 pushlock turn reset pushbuttons (for AJN3) AS resin AJN3B-➁ AJN3B-➁ 1 B (black), G (green), R (red), Y (yellow) Lens For ø40 pushlock turn reset pushbuttons (for AJLN3) AS resin AJLN3L-➁ AJLN3L-➁ 1 -G (green), -R (red), L-Y (yellow), L-A (amber), L-W (white) Marking Plate For UPQN4 Plastic UPQN406N-W UPQN406N-WPN05 5 Rubber Washer (3.0mm thick) Rubber OW-12 OW-12PN10 10 Rubber Washer (1.5mm thick) Rubber OW-11 OW-11PN10 10 Shroud ➊ ➋ ➌ ➍ ➏ ➐ ➊ Half shroud (for pushbuttons) Metal ABN2G ABN2G 1 ➋ Full shroud (for pushbuttons) ABN2F ABN2F 1 ➌ Full shroud (for mushroom pushbuttons) ABN3G ABN3G 1 ➍ Shallow shroud (for jumbo mush- rooms) ABN4G ABN4G 1 ➎ Deep shroud (for jumbo mush- rooms) ABN4F ABN4F 1 ➏ Half shroud (for illuminated pushbuttons) ALN1GL ALN1GL 1

• For incandescent/LED illuminated pushbuttons (E12 base) ALN2GL ALN2GL 1 • For LED illuminated pushbuttons (BA9S base) ➐ Full shroud (for illuminated pushbuttons) ALN1F ALN1F 1
• For incandescent/LED illuminated pushbuttons (E12 base) ALN2FL ALN2FL 1 • For LED illuminated push- buttons (BA9S base) Selector Knob Knob for Illuminated selector switch AS resin ASLNH ASLNH- G (green), R (r ed), S (blue) ASLNHD ASLNHD-∗ A (amber), W (white), Y (yellow) (14/03/18)

ø30 Series Accessories and Replacement Parts ø30 Maintenance Parts Shape Description Material Part No. Ordering No. Package Quantity Remarks Spare Key ASN3K/4K,ABN5 Metal ASN-T1SK-24401 ASN-T1SK-24401PN02

• Applicable to ABN3K, ABN4K, ABN5 ASN∗K ASN-SK-24401 ASN-SK-24401PN02 Spare Key ASNK-T ASN∗K TW-SK-0 TW-SK-0PN02 2 Transformer 100/110V AC (for LED/1W incandescent lamps) TWR-016N TWR-016N 1 Mounting screws are not included. 200/220V AC (for LED/1W incandescent lamps) TWR-026N TWR-026N 1 Pin/Chain For ABN8P pinloock Metal ABN8P-PIN ABN8P-PIN 1 Pin, chain, and plate for ABN8P LED Lamps Dimensions Operating Voltage Current Draw Part No. Ordering No. ➁ Illumination Color Code Package Quantity BaseAC DC 6V AC/DC ±10% 8 mA 7 mA (A, R, W) 5.5 mA (G, PW, S) LSTD-6 LSTD-6➁ A: amber G: gr een PW: pure white R: r ed S: blue W: white Use a pure white (PW) LED lamp with yel low (Y) lens. BA9S/13 LSTD-6➁PN10 10 12V AC/DC ±10% 11 mA 10 mA LSTD-1 LSTD-1➁ 1 LSTD-1➁PN10 10 24V AC/DC ±10% 11 mA 10 mA LSTD-2 LSTD-2➁ 1 LSTD-2➁PN10 10 6V AC/DC ±10% 17 mA (A, R, W, Y) 8 mA (G, PW, S) 14 mA (A, R, W, Y) 5.5 mA (G, PW, S) LETD-6 LETD-6➁ A: amber G: gr een R: r ed S: blue W: white Y: yellow E12/15 LETD-6➁PN10 10 12V AC/DC ±10% 7 mA 6.5 mA LETD-8 LETD-8➁ 1 LETD-8➁PN10 10 24V AC/DC ±10% 11 mA 10 mA LETD-2 LETD-2➁ 1 LETD-2➁PN10 10 Incandescent Lamps Dimensions Rated Operating Voltage Lamp Ratings Part No. Package Quantity Life Base BA9S/13 22.5±1.5 ø11±1 6V AC/DC 1W (6.3V) LS-6 Approx. 1000 hours minimum eference value) 12V AC/DC 1W (18V) LS-8 18V AC/DC 1W (24V) LS-2 24V AC/DC 1W (30V) LS-3 Base E12/15 34±2 ø13±1 6V AC/DC 2W (6.3V) LE-6 12V AC/DC 2W (18V) LE-8 18V AC/DC 2W (24V) LE-2 24V AC/DC 2W (30V) LE-3
• Specify a color code in place of ➁ in the Order ing No. Base BA9S/13 20.8 Base E12/15 ø12 ø30 (14/03/18)

ø30 ø30 Series Accessories and Replacement Parts Transformer DIN Rail Mount Primary Voltage Secondary Voltage Part No. Applicable Load For 1W 100/110V AC 5.5V TWR516 One full voltage pilot light or illuminated switch containing LSTD-6➁, LETD-6➁ LED lamp (6V AC/DC) or LS-6 incandescent lamp (6.3 V AC/DC, 1W) 200/220V AC TWR526 400/440V AC TWR546 For 2W 100/110V AC 15V TWR518 One full voltage pilot light or illuminated switch containing LE-8 incandescent lamp (18V AC/DC, 2W) 200/220V AC TWR528 400/440V AC TWR548 Specifications Operating Voltage 100/110V AC, 115/120V AC, 200/220V AC, 230/240V AC, 380V AC, 400/440V AC, 480V AC (50/60Hz) Current Draw 2.4 VA Rated Insulation Voltage 600V Insulation Resistance 100 MΩ minimum (500V DC megger) Operating Temperature –30 to +60°C (no freezing) Storage Temperature –40 to +80°C (no freezing) Operating Humidity 35 to 85% RH (no condensation) Vibration Resistance Damage Limits: 30 Hz, amplitude 1.5 mm Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Shock Resistance Damage limits, Operating Extremes: 1,000 m/s Dielectric Strength 2,500V AC, 1 minute Terminal Screw M3.5 Applicable Wire 2 mm 2 maximum, 2 wires maximum Weight (approx.) 87g Accessories DIN Rail Part No. Ordering No. Length Weight (approx.) Material Package Quantity BAA1000 BAA1000PN10 1000 mm 200g Aluminum 10 BAP1000 BAP1000PN10 1000 mm 320g Steel 10 End Clip Part No. Ordering No. Applicable DIN Rail Weight (approx.) Material Package Quantity Dimensions BNL6 BNL6PN10 BAA1000 BAP1000 15g Steel (Zinc-plated) 10 (24) 45 9

• Use plastic end clip BC9Z-E/NS35N when using 400/440V AC primar y volt age transf ormers. Dimensions 45.5 BAA1000 1 3 4 JAPAN 2PRI. SEC. M3.5 Terminal Screw Terminal Cover Secondary Side Primary Side 2–ø3.3 Mounting Hole (14/03/18)

ø30 Series Instructions ø30 Safety Precautions

• Turn off the power to the ø30 series switches & pilot lights before starting installation, removal, wiring, maintenance, and inspection of the products. Failure to turn power off may cause electrical shocks or fire hazard.
• To avoid a burn on your hand, use the lamp holder tool when replacing lamps.
• For wiring, use wires of a proper size to meet the volt- age and current requirements. Tighten the M3.5 terminal screws to a tightening torque of 1.0 to 1.3 N·m. Failure to tighten terminal screws may cause overheat and fire. Instructions Panel Mounting for Square Pushbuttons and Pilot Lights 1. Tighten the square ring to the operator and position the ring corr ectly. 2. Lightly tighten the screw to secur e the pilot light onto the panel. Tightening Torque for Terminal Screws Tighten the terminal screws to a torque of 1.0 to 1.3 N·m. Replacement of Lamps Lamps can be replaced by using the lamp holder tool (OR- 55) from the front of the panel. How to Remove To remove, slip the lamp holder tool onto the lamp head lightly. Then push slightly, and turn the lamp holder tool counterclockwise. How to Install To install, insert the lamp head into the lamp holder tool. Place the pins on the lamp base to the grooves in the lamp socket. Inset the lamp and turn it clockwise. Installing the Anti-rotation Ring Panel Thickness and Rubber Washer Adjust the thickness of the rubber washers according to the panel thickness. Also, make sure to include the nameplate thickness when using a nameplate. Recommended tightening torque: 0.15 N·m OR-55 Rubber Washer Panel OGL11Anti-rotation rings are used on selector switches or pushbuttons which rotate and used when using no nameplates. Insert a 1.5mm thick rubber washer between the panel and the anti-rotation ring as shown on the right. Applicable Models
• Extended Illuminat ed P ushbuttons with Half Shr oud (LED) Extended P ushbuttons with Half Shroud (Diecast) Extended Illuminat ed P ushbuttons with Half Shr oud (Diecast) Panel Thickness (mm) Rubber Washer 1.5mm 3.0mm Supplied 1 piece 1 piece 0.8 to 1.8 – 1 piece 1.8 to 3.5 1 piece – Applicable Models
• Extended Illuminat ed P ushbuttons with F ull Shr oud (Incandescent) Extended Illuminat ed P ushbuttons with F ull Shr oud (LED) Extended Illuminat ed P ushbuttons with F ull Shr oud (Diecast)
• Mushroom P ushbuttons with F ull Shroud Panel Thickness (mm) Rubber Washer 1.5mm 3.0mm Supplied 2 pieces 1 piece 0.8 to 2.0 1 piece 1 piece 2.0 to 3.5 1 piece 1 piece 3.5 to 5.0 – 1 piece 5.0 to 6.0 (6.5) 1 piece – The number in brackets is for mush- room pushbuttons with full shr oud. Extended illuminated pushbuttons with full shroud (incandescent) are 5.0 mm maximum. Applicable Models
• Toggle Le ver
• Knob P ush Tur n Loc k Illuminat ed Pushb uttons Panel Thickness (mm) Rubber Washer 1.5mm 3.0mm Supplied 1 piece 1 piece 0.8 to 2.0 1 piece 1 piece 2.0 to 3.5 – 1 piece 3.5 to 5.5 (5.0) 1 piece – The number in brackets is for knob push turn lock illuminated pushbut tons. Applicable Models
• Extended P ushbuttons with Half Shroud Extended Illuminat ed P ushbuttons with Half Shr oud (Incandescent) Panel Thickness (mm) Rubber Washer 1.5mm 3.0mm Supplied 1 piece 1 piece 0.8 1 piece 1 piece 0.8 to 2.3 – 1 piece 2.3 to 4.0 1 piece – Applicable Models
• Extended P ushbuttons with F ull Shroud Panel Thickness (mm) Rubber Washer 1.5mm 3.0mm Supplied 3 pieces 1 piece 0.8 to 1.5 3 pieces 1 piece 1.5 to 3.0 2 pieces 1 piece 3.0 to 4.5 1 piece 1 piece 4.5 to 6.0 – 1 piece 6.0 to 7.5 1 piece – Applicable Models
• Extended P ushbuttons with F ull Shroud (Diecast) Panel Thickness (mm) Rubber Washer 1.5mm 3.0mm Supplied 2 pieces 1 piece 0.8 to 2.5 2 pieces 1 piece 2.5 to 4.0 1 pieces 1 piece 4.0 to 5.5 – 1 piece 5.5 to 6.0 1 piece – Applicable Models
• Other Models (Ex cluding Squar e) Panel Thickness (mm) Rubber Washer 1.5mm 3.0mm Supplied 2 pieces 1 piece 0.8 to 3.5 2 pieces 1 piece 3.5 to 5.0 1 piece 1 piece 5.0 to 6.5 – 1 piece 6.5 to 7.5 1 piece – ø30 (14/03/18)

ø30 ø30 Series Instructions Installation of LED Illuminated Units 1. Note the polarity for wiring when connecting to DC-DC converter unit. Terminal No. Polarity X1 Positive X2 Negative 2. Transformer units are recommended for use in areas subjected to noise. Notes for Pure White LED Lamps

• Do not use the pur e white LED outdoors, otherwise it will lead to the degradation of brightness and color. Do not remove or apply shock to the cap on the pure white LED lamp, otherwise it may break or damage the cap.
• For the pure white LED, use a white lens. The illumination color will be dull if a different color is used. Notes on LED Illuminated Units LED lamps consist of semiconductors. If the applied voltage exceeds the rated voltage, LED elements may deteriorate due to overheat, resulting in significant decrease in lumi nance, hue change, or failure of lighting. Also, if an extrane ous noise, transient voltage, or transient current is applied to the cir cuit, similar effects may occur. When using LED lamps, observe the following instructions. Rated Voltage The LED lamps are rated at 6V, 12V, or 24V AC/DC, and can be used within ±10% the rated voltage of either AC or DC. DC Power Switching power supply Regulated voltage fr om switching power supply is best suited. Make sure to use within the rated voltage of the LED lamp. Rechar geable battery Note that the battery voltage may exceed the rated volt- age of the LED lamp while the battery is being charged and immediately after the char ging is complete. Be sure to use the LED lamp on a voltage of ±10% the rated volt age. 3. Full-wave rectification Since the LED lamp is AC/DC compatible, a diode bridge for rectification is not necessary. If the LED lamp is used on a full-wave rectification current through a diode bridge, the rectifier diodes will reduce the voltage, result ing in lower luminance. 4. Single-phase half-wave rectification This is not suitable for the power sour ce of LED lamps. Use constant-voltage DC power. Noise LED elements deteriorate due to extraneous noise, result- ing in significant decrease in luminance, hue change, or fail ure of lighting. When such ef fects are anticipated, take a protection measure shown below, such as RC elements or a surge absorber. [Protection Example 1] For AC circuit LED with transformer LED R C LEDRyRelay coil or solenoid R C LED with transformer (Reference values) R: 120Ω C: 0.1 μF [Protection Example 2] For DC circuit Ry LED DiodeRelay coil or solenoid (Reference values of the diode) Forward current: More than the Ry coil current Reverse withstand voltage: Ry coil current ¥ 10 Countermeasures against Dim Lighting 1. Leakage currents thr ough the transistors or a contact protection circuit may cause the LED lamp to illuminate dimly even when the output is off. 2. When the LED lamp is illuminated by a transistor output, take the following measure. [Cir cuit Example] Connect shunt resistor R in parallel with the LED lamp. R Io Io: Leakage current when the output is off R: Shunt resistor LED (14/03/18)