BML085L BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Magnetically Coded Sensors BML SGA-AEZ1-LZZZ-ZU11-S115 Order Code: BML085L Internet www.balluff.com eCl@ss 9.1: 27-27-07-05 Subject to change without notice: 279042 ETIM 6.0: EC002544 BML085L_0.3_2021-05-21 1) not included in scope of delivery, 2) Distance to tape, 3) Tape, 4) LED function indicator, 5) Active measurement surface Basic features Application linear/rotary motion Approval/Conformity cURus CE EAC WEEE Measuring principle absolute measuring system Series SGA Display/Operation Function indicator Green LED LED yellow LED red Electrical connection Connection Connector, M12x1-Male, 8-pin Connection version axial Polarity reversal protected yes Electrical data Current consumption max. at 24 V DC 75 mA Hysteresis H max. 1 µm Operating voltage Ub 10...30 VDC Overvoltage protection to 36 V Power consumption ≤ 1.8 W (no load) Switch-on delay max. 3300 ms Voltage-proof up to (GND to housing) 500 V DC Environmental conditions Altitude max. 2000 m Ambient temperature -30...70 °C EN 55016-2-3, Radiation Industrial areas EN 60068-2-27, Continuous shock 150 g, 2 ms EN 60068-2-27, Shock 100 g, 6 ms EN 60068-2-6, Vibration 20 g, 10…2000 Hz EN 60068-2-64, Noise 20 g, 5…2000 Hz EN 61000-4-2, ESD Severity Level 4 EN 61000-4-3, RFI Severity Level 3 EN 61000-4-4, Burst Severity Level 3 EN 61000-4-5, Surge Severity Level 2 EN 61000-4-6, High-frequency fields Severity Level 3 EN 61000-4-8 Magnetic fields Severity Level 5 Ext. magnetic fields max., in operation 1 mT (no effect) IP rating IP67 Overall system temperature coefficient 10.5 ppm/K Relative humidity ≤ 90 %, non-condensing Storage temperature -30...85 °C Functional safety MTTF (40 °C) 148 a
Magnetically Coded Sensors BML SGA-AEZ1-LZZZ-ZU11-S115 Order Code: BML085L Internet www.balluff.com eCl@ss 9.1: 27-27-07-05 Subject to change without notice: 279042 ETIM 6.0: EC002544 BML085L_0.3_2021-05-21 Material Housing material Die-cast zinc, nickel plated, Chrome-plated Housing material, surface protection nickel-plated Chrome-plated Mechanical data Diameter min. 400 mm Dimension 16 x 18.6 x 54 mm Lateral offset (Y) ±1.5 mm Mounting part Through-hole 4.3 mm Pitch max. ±0.5 ° Pole width 2 mm Procedure direction Lengthwise to tape Roll max. ±0.5 ° Tangential offset (X) max. ±0.5 mm Weight 50 g Yaw max. ± 1.0 ° Output/Interface Count direction rising Cycle time min. 31.25 µs Differential signals yes Error signal yes Interface DRIVE-CLiQ Interface coding Binary Range/Distance Interpolation factor 2000 Measuring range 48 m Non-linearity of sensor head, max. ±2 µm Optimal read distance 0.3 mm Repeat accuracy ≤ 1 µm Resolution 1 µm Traverse speed max. 5 m/s Connector Drawings Wiring Diagrams