BML077L BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Magnetically Coded Sensors BML-S1G0-S7FF-M5EZ-90-S284 Order Code: BML077L Internet www.balluff.com eCl@ss 9.1: 27-27-07-05 Subject to change without notice: 279023 ETIM 6.0: EC002544 BML077L_0.32_2021-08-25 1) not included in scope of delivery, 2) Distance to tape, 3) Tape, 4) LED function indicator, 5) Active measurement surface Basic features Application linear/rotary motion Approval/Conformity cURus CE EAC WEEE Measuring principle absolute measuring system Series S1G Display/Operation Function indicator Green LED LED yellow LED red Electrical connection Connection Connector, M12x1-Male, 12-pin Connection version axial Polarity reversal protected no Electrical data Current consumption max. at 24 V DC 70 mA Current consumption max. at 5 V DC 220 mA Hysteresis H max. 2 µm Overvoltage protection no Power consumption ≤ 1.5 W (no load) Switch-on delay max. 1000 ms Voltage-proof up to (GND to housing) 500 V DC
Magnetically Coded Sensors BML-S1G0-S7FF-M5EZ-90-S284 Order Code: BML077L Internet www.balluff.com eCl@ss 9.1: 27-27-07-05 Subject to change without notice: 279023 ETIM 6.0: EC002544 BML077L_0.32_2021-08-25 Environmental conditions Altitude max. 2000 m Ambient temperature -20...70 °C EN 55016-2-3, Radiation Industrial areas EN 60068-2-27, Continuous shock 150 g, 2 ms EN 60068-2-27, Shock 100 g, 6 ms EN 60068-2-6, Vibration 20 g, 10…2000 Hz EN 60068-2-64, Noise 20 g, 5…2000 Hz EN 61000-4-2, ESD Severity Level 4 EN 61000-4-3, RFI Severity Level 3 EN 61000-4-4, Burst Severity Level 3 EN 61000-4-5, Surge Severity Level 2 EN 61000-4-6, High-frequency fields Severity Level 3 EN 61000-4-8 Magnetic fields Severity Level 5 Ext. magnetic fields max., in operation 1 mT (no effect) IP rating IEC 60529 (connector) IP67 Overall system temperature coefficient 10.5 ppm/K Relative humidity ≤ 90 %, non-condensing Storage temperature -25...85 °C Functional safety MTTF (40 °C) 93 a Interface Bits, number 32 Bit Clock RS422 differential signal Count direction rising Differential signals yes Error signal yes Interface SSI Interface coding Gray Preset configurable via hardware PIN or software tool SSI clock frequency max. 1.3 MHz SSI clock frequency min. 70 kHz SSI data 1x error bit 3x null bit 28x position Material Housing material Die-cast zinc, nickel plated, Chrome-plated Housing material, surface protection nickel-plated Chrome-plated Mechanical data Diameter min. 243 mm Dimension 16 x 18.5 x 80.3 mm Lateral offset (Y) ±0.5 mm Mounting part Through-hole 4.3 mm Pitch max. ±0.5 ° Pole width 2 mm Procedure direction Lengthwise to tape Roll max. ±0.5 ° Tangential offset (X) max. ±0.5 mm Weight 78 g Yaw max. ± 0.2 ° Range/Distance Interpolation factor 400 Measuring range 48 m Non-linearity of sensor head, max. ±2 µm Optimal read distance 0.4 mm Repeat accuracy ≤ 1 µm Resolution 5 µm Traverse speed max., absolute interface 10 m/s
Magnetically Coded Sensors BML-S1G0-S7FF-M5EZ-90-S284 Order Code: BML077L Internet www.balluff.com eCl@ss 9.1: 27-27-07-05 Subject to change without notice: 279023 ETIM 6.0: EC002544 BML077L_0.32_2021-08-25 Connector Drawings Wiring Diagrams