BML057A BALLUFF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Magnetically Coded Sensors BML-S1G0-S76F-M5EA-D0-S284 Order Code: BML057A Internet www.balluff.com eCl@ss 9.1: 27-27-07-05 Subject to change without notice: 278926 ETIM 6.0: EC002544 BML057A_0.32_2021-08-25 1) not included in scope of delivery, 2) Distance to tape, 3) Tape, 4) LED function indicator, 5) Active measurement surface Basic features Additional features 01 Real-time capable Application linear/rotary motion Approval/Conformity cURus CE EAC WEEE Measuring principle absolute measuring system Series S1G Display/Operation Function indicator Green LED LED yellow LED red Electrical connection Connection Connector, M12x1-Male, 12-pin Connection version axial Polarity reversal protected no Electrical data Current consumption max. at 24 V DC 70 mA Current consumption max. at 5 V DC 220 mA Hysteresis H max. 2 µm Overvoltage protection no Periods 2 mm Power consumption ≤ 1.5 W (no load) Switch-on delay max. 1000 ms Voltage-proof up to (GND to housing) 500 V DC

Magnetically Coded Sensors BML-S1G0-S76F-M5EA-D0-S284 Order Code: BML057A Internet www.balluff.com eCl@ss 9.1: 27-27-07-05 Subject to change without notice: 278926 ETIM 6.0: EC002544 BML057A_0.32_2021-08-25 Environmental conditions Altitude max. 2000 m Ambient temperature -20...70 °C EN 55016-2-3, Radiation Industrial areas EN 60068-2-27, Continuous shock 150 g, 2 ms EN 60068-2-27, Shock 100 g, 6 ms EN 60068-2-6, Vibration 20 g, 10…2000 Hz EN 60068-2-64, Noise 20 g, 5…2000 Hz EN 61000-4-2, ESD Severity Level 4 EN 61000-4-3, RFI Severity Level 3 EN 61000-4-4, Burst Severity Level 3 EN 61000-4-5, Surge Severity Level 2 EN 61000-4-6, High-frequency fields Severity Level 3 EN 61000-4-8 Magnetic fields Severity Level 5 Ext. magnetic fields max., in operation 1 mT (no effect) IP rating IEC 60529 (connector) IP67 Overall system temperature coefficient 10.5 ppm/K Relative humidity ≤ 90 %, non-condensing Storage temperature -25...85 °C Functional safety MTTF (40 °C) 90 a Interface Bits, number 25 Bit Clock RS422 differential signal Count direction rising Differential signals yes Error signal yes Interface SSI Analog Sin/Cos (1 Vpp) Interface coding Binary Preset configurable via hardware PIN or software tool Real-time signals Analog, sin/cos SSI clock frequency max. 900 kHz SSI clock frequency min. 70 kHz SSI data 1x error bit 1x null bit 23x position Signal sequence A before B = rising Material Housing material Die-cast zinc, nickel plated, Chrome-plated Housing material, surface protection nickel-plated Chrome-plated Mechanical data Diameter min. 243 mm Dimension 16 x 18.5 x 80.3 mm Lateral offset (Y) ±0.5 mm Mounting part Through-hole 4.3 mm Pitch max. ±0.5 ° Pole width 2 mm Procedure direction Lengthwise to tape Roll max. ±0.5 ° Tangential offset (X) max. ±0.5 mm Weight 78 g Yaw max. ± 0.2 ° Range/Distance Interpolation factor 400 Measuring range 20 m Non-linearity of sensor head, max. ±2 µm Optimal read distance 0.4 mm Repeat accuracy ≤ 1 µm Resolution 5 µm Traverse speed max., absolute interface 10 m/s Traverse speed max., incremental interface 10 m/s

Magnetically Coded Sensors BML-S1G0-S76F-M5EA-D0-S284 Order Code: BML057A Internet www.balluff.com eCl@ss 9.1: 27-27-07-05 Subject to change without notice: 278926 ETIM 6.0: EC002544 BML057A_0.32_2021-08-25 Connector Drawings Wiring Diagrams