BMF000L BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
BMF 07M-PS-D-2-SA2-S49-00,3 Order Code: BMF000L Internet www.balluff.com eCl@ss 9.1: 27-27-01-04 Subject to change without notice: 297681 ETIM 6.0: EC002544 BMF000L_0.22_2024-09-18 1) see remarks Basic features Application Flexible mounting Switching distances > 20 mm possible Approval/Conformity cULus CE UKCA WEEE Basic standard IEC 60947-5-2 Principle of operation Magnetic field sensor Display/Operation Function indicator no Electrical connection Cable PUR, 0.3 m Cable diameter D 3.10 mm Connection M8x1-Male, 3-pin Polarity reversal protected yes Protection against device mix-ups yes Short-circuit protection yes Electrical data Assured switching field strength Ha 2 kA/m Hysteresis H max. (% of Hn) 45 % Load capacitance max. at Ue 1 µF No-load current Io max., undamped 10 mA Operating voltage Ub 10...30 VDC Output resistance Ra Open drain Rated insulation voltage Ui 75 V DC Rated operating current Ie 200 mA Rated operating voltage Ue DC 24 V Rated short circuit current 100 A Rated switch field strength Hn 1.2 kA/m Residual current Ir max. 80 µA Ripple max. (% of Ue) 15 % Switching frequency 10000 Hz Turn-off delay toff max. 0.05 ms Turn-on delay ton max. 0.05 ms Utilization category DC -13 Voltage drop static max. 3.1 V Environmental conditions Ambient temperature -25...85 °C Contamination scale 3 EN 60068-2-27, Shock Half-sinus, 30 g , 11 ms EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min ESD 4A(8KV) IP rating IP67 n
BMF 07M-PS-D-2-SA2-S49-00,3 Order Code: BMF000L Internet www.balluff.com eCl@ss 9.1: 27-27-01-04 Subject to change without notice: 297681 ETIM 6.0: EC002544 BMF000L_0.22_2024-09-18 Functional safety MTTF (40 °C) 330 a Interface Switching output PNP normally open (NO) Material Housing material Brass, nickel-plated Housing material, surface protection nickel-plated Material jacket PUR Material sensing surface PBTP Surface protection nickel-plated Mechanical data Dimension Ø 6.5 x 30 mm Mounting part Clamps Size D6.5 Range/Distance Temp. drift max. (% of Hn) 0.3 % Remarks 1) Install marker on cylinder wall The switching distance depends on the magnet used. Switching distances of >20 mm can be achieved. The sensor is functional again after the overload has been eliminated. UL-MARKINGS: - For use in NFPA 79 Applications only - Adapters providing field wiring means are available from the manufacturer. Refer to manufacturers information. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. Connector Drawings Wiring Diagrams (Schematic)
BMF 07M-PS-D-2-SA2-S49-00,3 Order Code: BMF000L Internet www.balluff.com eCl@ss 9.1: 27-27-01-04 Subject to change without notice: 297681 ETIM 6.0: EC002544 BMF000L_0.22_2024-09-18 Technical Drawings