FMN.1M.305.XLC_V01 LEMO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 40
Technical content
M SER IES C O N N EC TO R S R ATC H ET C O U PLIN G
1www.lemo.com ® ® Introduction This catalogue gives the complete description of LEMO M series connectors. M series connectors are lightweight triple- start ratchet coupling type connectors designed for avionics, aerospace, military, security, motorsport and heavy duty appli- cations. The LEMO manufacturing programme has been extended to almost 40 series divided into 7 product families with specific mating and environmental characteristics. Each series includes a wide variety of plug, socket and coupler models, avail- able in contact configurations adapted to all round cables. Watertight models are also available. Since LEMO connectors are perfectly screened and designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electromagnetic compatibility (EMC) is important. Technical Characteristics Component Outer shell Conical nut Earthing crown Coupling nut Ratchet Hexagonal nut Male crimp contact Female crimp contact Clips Insulator O-ring Sealing resin Cable rear seal Spring Material (Standard) Brass (UNS C 38500) Aluminium alloy (AA 6262A or AA 6023) Brass (UNS C 38500) Aluminium alloy (AA 6262A or AA 6023) Bronze (UNS C 54400) or special brass Brass (UNS C 38500) Aluminium alloy (AA 6262A or AA 6023) Special PEEK Brass (UNS C 38500) Aluminium alloy (AA 6262A or AA 6023) Brass (UNS C 34500) Bronze (UNS C 54400) Cu-Be or special steel PEEK Silicone FPM/FKM (Viton Epoxy (Araldite® or Stycast®) Fluorosilicone Stainless steel Shell material code XC without treatment Surface treatment (µm) chrome nickel gold Cu Ni Cr Cu Ni Cu Ni Au Materials and Treatments Notes Notes: standards for surface treatment are as follows: chrome-plated SAE AMS 2460; nickel-plated SAE AMS QQ N 290 or MIL DTL 32119; gold-plated ISO 27874. 1) anthracite colour. -55°C/+200°C (HEN model: -20°C/+80°C) IP 68 (at 2 m, 15Hr) IEC 60529 Satisfied - by material analysis MIL-STD 810F-508.5 60 sec. front and back face EIA-364-104A Fuels, gasoline, hydraulic oils, solvents, de-icing MIL-STD-810F method 504 6 hr, 55°C, blowing < 150 µm dust MIL-STD 810F-510.4
10 K amps - 6 times EIA-364-75
-65°C; 40’000 feet and 400 VAC EIA-364-105A Alum. shell (slight pitting after 48Hr), Brass shell (500Hr) IEC 60512-6 test 11f EIA-364-26 5 cycles: -65° C to +150° C IEC 60512-11-4 EIA-364-32 test condition IV No moisture on contacts EIA-364-03 21 days at 95% IEC 60068-2 EIA-364-31 method IV Operating temperature (mated) Ingress protection index Fungus Flammability Fluid contamination Sand and dust 2) Lightning strike Altitude-low temp Salt fog 4) Thermal shock Altitude immersion Humidity Characteristics Value IEC international MIL-spec tests Environmental performance Note: 1) Connectors immersed at both 70°C and 25°C according to specification. Connectors are then inspected, no visual signs of damage seen. Fuels: Kerosene, JP4, (Nato F40) at 70°C +/- 2°C. Gasoline: ASTM 4814. Hydraulic oils: Mineral oil based MIL-H-5606. Solvents: Isopropanol. De-icing fluids: 25% ethylene glycol. 2) No signs of damage, connectors opened and closed without difficulty. Dust or sand was not inside connector. 3) Wired mated connectors = no voltage breakdown, shell to all contacts (connected together) w/400 VAC after 1 hour at 65° C at 40’000 feet altitude. 4) Corrosion resistance. Inspection: salt deposits shall be removed by gentle wash in running water with light brushing using soft brush. Aluminium Shell (material code: X) max: 96 hours. Brass shell (material code: C) over 500 hours.
Vibration-S ine 8) Vibration-R andom S hock Acceleration C ontact retention Torque 2 w w w .lem o.com ® ® > 10 12 Ω, > 10 10 Ω ( after hum idity ) IE C 60512-2 test 3a E IA-364-21 S ee table page 22-23-24 IE C 60512-2 test 4a E IA-364-20 S ee table below 7) IE C 60512-2 test 2a E IA-364-06 S ee insulator configuration page 22-23-24 IE C 60512-3 test 5a < 1. 5m Ω IE C 60512-2-6 E IA-364-83 ≥ 80 dB up to 1G H z E IA-364-66 ≥ 70 dB ( 3G H z), ≥ 58 dB (6G H z), ≥ 40 dB (10G H z) E IA-364-66 Insulation resist. (at am bient tem p.) 6) D ielectric w ithstanding volt. (sea level) C ontact resistance C urrent rating S hell to shell conductivity S hielding effectiveness, low frequency S hielding effectiveness, high frequency Electrical perform ance C haracteristics Value IE C international M IL-spec tests N ote: 6) After hum idity test: 21 days at 95% RH according to IEC 60068 -2. Insulation resistance m easured betw een the contacts and contact/shell. N otes: 7) after 5000 m ating cycles and the salt spray test according to IE C 60512-6 test 11 f. Value ø A (m m ) m Ω C ontact resistance 7) IE C 60512-2 test 2a 0.5 0.7 0.9 1.3 3000 cycles IE C 60512-5 test 9 a E IA-364-09 25 to 2000 H z, 3 axis (Apache helicopter) M IL-S TD -810F m ethod 519 .5 30 g, 3 axis, 12 hr M IL-S TD -202 m ethod 204-G 50-2000 H z, 37.8 g rm s-3 axes; 4h am b IE C 60512-6-4 E IA-364-28 test cond. V letter I 300 g - 3 m sec IE C 60512-6-3 E IA-364-27 condition D 50 g acceleration M IL-S TD -1344 - 2011-1, A > 22 N (ø 0. 7m m ), > 3 0N (ø 0.9 m m ) IE C 60512-8 test 15a S ee table below M echanical perform ance C haracteristics Value IE C international M IL-spec tests N ote: 8) Am plitude: 30G . F requency: 10 to 2000 H z. Tim e per axis: 4 hours (X, Y, Z). N o signal discontinuity above 1 µs. N ote: 9 ) H igher contact density = larger torque force. S eries M M C oupling torque C oupling torque tightning (N .cm ) untightning (N .cm ) 10 11 20 14 34 29 S eries TM LM C oupling torque C oupling torque tightning (N .cm ) untightning (N .cm ) 26 30 26 25 48 9 ) 43 9 1 9 ) 54
Fixed socketsStraight plugs EG Free sockets PM PM PM PM PH PH EG PH FG FG FG FA FA FA FM FM Fixed sockets Fixed socketStraight plugs FM FM FW FW FW FX FX FX FM Fixed sockets Free socketsStraight plugs PB PB PB PV PV PV PF PF EC EC ED ED HE PE PE EG FG EG EG PH FG ED ® ® The M Series connector offers a new innovative design for avionics, aerospace, m ilitary, security, m otorsport and heavy duty applications. M ade of high-strength alum inium , this connector is one of the lightest and m ost com pact of the LEM O product line. A one-grip ratchet screw system enables quick and secure coupling of the connectors. The arctic grip m akes it easy to m anip - ulate the connector w hile w earing gloves or w hen the connector is located in a difficult to access area. F eatures – Ratchet-coupling m echanism – Q uick m ating: less than 3/4 turn to seat – Com pact design for space savings – Lightw eight – O il and fuel resistant – H igh vibration and shock resistance – 360° screening for full EM C shielding – Sealed to IP 68 w hen m ated – Colour coding / keying – Reverse sex configuration – Scoop proof – P in configuration from 2 to 114 contacts – Threaded for M IL-D TL-38 999L backshell M Series M etal housing m odels (page 5) W atertight m odel (unm ated) U SB m odels (page 21) Fibre optic m odels (page 18) 3w w w .lem o.com
4 w w w .lem o.com ® ® outer shell o-ring hexagonal nut insulator female contact earthing crown outer shell insulator male contact rear seal tightening screw ratchet mechanism spring Fixed socket Straight plug2 134 65 231 7 5 6 4 XLC Straight plug: FM N.1M .30 5.XLC = straight plug w ith key (N ), 1M series, m ultipole type w ith 5 contacts, outer shell in anthracite nickel-plated alum inium alloy, PE E K insulator, m ale crim p contacts. Straight plug: FG N.1M .30 5.XLCM = straight plug w ith key (N ), arctic grip, 1M series, m ultipole type w ith 5 contacts, outer shell in anthracite nickel-plated alum inium alloy, PE E K insulator, m ale crim p contacts and w ith M IL-D TL-38 999L thread for additional backshell (not supplied) . FM N 1M Insert configuration: (page 22) 30 5 S eries: (page 5) M odel: (page 5) Alignm ent key: (page 21) Fixed socket H E N 1M 30 5 XLN H ousing: C = C hrom e-plated brass X = N ickel-plated alum inium alloy 1) Insulator: L = PE E K (m ultipole page 22) R = PE E K (m ixed m ultipole p. 24) C ontact: (page 25) Fixed socket: HEN.1M .30 5.XLNP = fixed socket, nut fixing, w ith key (N ), 1M series, m ultipole type w ith 5 contacts, outer shell in anthracite nickel-plated alum inium alloy , PE E K insulator, fem ale print contacts, w atertight. Variant: T= M old stop P= Potted M= M IL-D TL-38 999L shell thread Part N um bering System Plug PM N 1M 30 5 XLMFree socket Part N um ber Exam ple Free socket: PM N.1M .30 5.XLM T = free socket w ith key (N ), 1M series, m ultipole type w ith 5 contacts, outer shell in anthracite nickel-plated alum inium alloy , PE E K insulator, fem ale crim p contacts and m old stop. .. . .. . .. . P T X LCFG N 1M 30 5 .. . M N ote: 1) anthracite colour. Part Section Show ing Internal C om ponents
5w w w .lem o.com ® ® M etal housing m odels Straight plug, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip and M IL-DTL-38999L shell thread R eference M odel S eries FM G FM G 1M FM G 2M FM G 3M FM G TM FM G 4M FM G LM FM G 5M Part num ber exam ple: F M N .1M .305.XLCM ø A ø C e Ls/Lr 9 P N ote: Ls = standard gender, Lr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). D im ensions (m m ) AC e Ls Lr P C ode 1) Straight plug, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip R eference M odel S eries D im ensions (m m ) ABCD Ls Lr PX FM G FM G M M FM G 0M FM G 1M FM G 2M FM G 3M FM G TM FM G 4M FM G LM FM G 5M Part num ber exam ple: F M N .1M .305.XLC Straight plug, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip and m old stop R eference M odel S eries D im ensions (m m ) ABCDF Ls Lr MP X FM G FM G M M FM G 0M FM G 1M FM G 2M FM G 3M FM G TM FM G 4M FM G LM FM G 5M Part num ber exam ple: F M N .1M .305.XLCT ø A ø C ø B ø D Ls/Lr X P ø A ø C ø B ø F ø D Ls/Lr M P X 1.5 N ote: Ls = standard gender, Lr = reverse gender N ote: Ls = standard gender, Lr = reverse gender
6 w w w .lem o.com ® ® Straight plug, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip and m old stop R eference M odel S eries FG G FG G M M FG G 0M FG G 1M FG G 2M FG G 3M FG G TM FG G 4M FG G LM FG G 5M Part num ber exam ple: F G N .1M .305.XLCT ø A ø C ø B ø F ø D Ls/Lr M P X 1.5 D im ensions (m m ) ABCDF Ls Lr MP X N ote: Ls = standard gender, Lr = reverse gender Straight plug, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip R eference M odel S eries FG G FG G M M FG G 0M FG G 1M FG G 2M FG G 3M FG G TM FG G 4M FG G LM FG G 5M Part num ber exam ple: F G N .1M .305.XLC ø A ø C ø B ø D Ls/Lr P X N ote: Ls = standard gender, Lr = reverse gender D im ensions (m m ) ABCD Ls Lr PX FG G e ø A ø C Ls/Lr P Straight plug, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip and M IL-DTL-38999L shell thread R eference M odel S eries FG G 1M FG G 2M FG G 3M FG G TM FG G 4M FG G LM FG G 5M Part num ber exam ple: F G N .1M .305.XLCM N ote: Ls = standard gender, Lr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). D im ensions (m m ) AC e Ls Lr P C ode 1)
7w w w .lem o.com ® ® Straight plug w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip and M IL-DTL-38999L shell thread FX G Part num ber exam ple: F XN .1M .305.XLCM ø A1 ø C Ls/Lr G K P1.5 ø E e H ø V ø A N ote: The dim ensions «N » and «V» are the sam e as the F X G m odels and the dim ension «P » is the sam e as the F M G m odels. Ls = standard gender, Lr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). Straight plug w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip FX G Part num ber exam ple: F XN .1M .305.XLC Straight plug w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip and m old stop FX G ø A1 ø C Ls/Lr G K X P1.5 ø B ø D ø E N H ø V ø A ø A1 ø C Ls/Lr G K P1.5 ø E ø B ø F ø D M X 1.5 N H ø V ø A N ote: The dim ensions «P » and «X» are the sam e as the F M G m odels. Ls = standard gender, Lr = reverse gender. R eference M odel S eries D im ensions (m m ) A A1 BCD EGH K Ls Lr NV FX G M M FX G 0M FX G 1M FX G 2M FX G 3M FX G TM FX G 4M FX G LM FX G 5M Part num ber exam ple: F XN .1M .305.XLCT N ote: The dim ensions «F », «M », «P » and «X» are the sam e as the F M G m odels. Ls = standard gender, Lr = reverse gender. R eference M odel S eries D im ensions (m m ) A A1 BCD EGH K Ls Lr NV FX G M M FX G 0M FX G 1M FX G 2M FX G 3M FX G TM FX G 4M FX G LM FX G 5M R eference M odel S eries D im ensions (m m ) A A1 CeE G H K Ls Lr C ode 1) FX G 1M FX G 2M FX G 3M FX G TM FX G 4M FX G LM FX G 5M
8 w w w .lem o.com ® ® Straight plug w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip and M IL-DTL-38999L shell thread FW G Part num ber exam ple: F W N .1M .305.XLCM Ls/Lr G K 1.5 ø E e ø A1 ø C PN H ø V ø A N ote: The dim ensions «N » and «V» are the sam e as the F W G m odels and the dim en - sion «P » is the sam e as the F M G m odels. Ls = standard gender, Lr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). Straight plug w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip FW G Part num ber exam ple: F W N .1M .305.XLC Straight plug w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip and m old stop FW G Ls/Lr G K X 1.5 ø B ø D ø E ø A1 ø C PN H ø V ø A Ls/Lr G K 1.5 ø E ø B ø F ø D M X 1.5 ø A1 ø C PN H ø V ø A N ote: The dim ensions «P » and «X» are the sam e as the F M G m odels. Ls = standard gender, Lr = reverse gender. R eference M odel S eries D im ensions (m m ) A A1 BCD EGH K Ls Lr NV FW G M M FW G 0M FW G 1M FW G 2M FW G 3M FW G TM FW G 4M FW G LM FW G 5M Part num ber exam ple: F W N .1M .305.XLCT N ote: The dim ensions «F », «M », «P » and «X» are the sam e as the F M G m odels. Ls = standard gender, Lr = reverse gender. R eference M odel S eries D im ensions (m m ) A A1 BCD EGH K Ls Lr NV FW G M M FW G 0M FW G 1M FW G 2M FW G 3M FW G TM FW G 4M FW G LM FW G 5M R eference M odel S eries D im ensions (m m ) A A1 CeE G H K Ls Lr C ode 1) FW G 1M FW G 2M FW G 3M FW G TM FW G 4M FW G LM FW G 5M
9w w w .lem o.com ® ® Straight plug w ith square flange, non-latching, key (N ) or keys (P, R , S, T, U , V, W and X) w ith M IL-DTL-38999L shell thread FA G Part num ber exam ple: F AN .1M .305.XLCM ø C Ls/Lr G K P ø E e H ø V ø A N ote: The dim ensions «P » and «V» are the sam e as the F A G m odels. Ls = standard gender, Lr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). Straight plug w ith square flange, non-latching, key (N ) or keys (P, R , S, T, U , V, W and X) FA G Part num ber exam ple: F AN .1M .305.XLC Straight plug w ith square flange, non-latching, key (N ) or keys (P, R , S, T, U , V, W and X) w ith m old stop FA G ø C Ls/Lr G K X P ø B ø D ø E N H ø V ø A ø C Ls/Lr G K P ø E ø B ø F ø D M X 1.5 N H ø V ø A N ote: The dim ension «X» is the sam e as the F M G m odels. Ls = standard gender, Lr = reverse gender. R eference M odel S eries D im ensions (m m ) ABCDE G H K Ls Lr NPV FA G M M FA G 0M FA G 1M FA G 2M FA G 3M FA G TM FA G 4M FA G LM FA G 5M Part num ber exam ple: F AN .1M .305.XLCT N ote: The dim ensions «F », «M » and «X» are the sam e as the F M G m odels. Ls = standard gender, Lr = reverse gender. R eference M odel S eries FA G M M FA G 0M FA G 1M FA G 2M FA G 3M FA G TM FA G 4M FA G LM FA G 5M D im ensions (m m ) ABCDE G H K Ls Lr NPV R eference M odel S eries FA G 1M FA G 2M FA G 3M FA G TM FA G 4M FA G LM FA G 5M D im ensions (m m ) AC e E GH K Ls Lr N C ode 1)
10 w w w .lem o.com ® ® Fixed socket, nut fixing, key (N ) or keys (P, R , S, T, U , V, W and X) EG G D im ensions (m m ) CD e E Ls Lr P S 1 S 2 R eference M odel S eries Part num ber exam ple: EG N .1M .305.XLM E G G M M E G G 0M E G G 1M E G G 2M E G G 3M E G G TM E G G 4M E G G LM E G G 5M ø C e Ls/Lr P D E maxiS 2 S 1 N ote: Ls = standard gender, Lr = reverse gender Fixed socket, nut fixing, key (N ) or keys (P, R , S, T, U , V, W and X) for printed circuit EG G D im ensions (m m ) CD e EG Ls Lr P S 1 S 2 R eference M odel S eries Part num ber exam ple: EG N .1M .305.XLN E G G M M E G G 0M E G G 1M E G G 2M E G G 3M E G G TM E G G 4M E G G LM E G G 5M ø C e Ls/Lr G P D E maxi S 1 S 2 4.5 5.4 N ote: Ls = standard gender, Lr = reverse gender Fixed socket w ith tw o nuts, key (N ) or keys (P, R , S, T, U , V, W and X) R eference M odel S eries EC G E C G M M E C G 0M E C G 1M E C G 2M E C G 3M E C G TM E C G 4M E C G LM E C G 5M Part num ber exam ple: ECN .1M .305.XLM e ø A ø C ø B Ls/Lr P E maxi G S 2 S 1S 3 N ote: Ls = standard gender, Lr = reverse gender. This m odel is not IP 68 (no panel sealing). D im ensions (m m ) ABC E e G Ls Lr P S 1 S 2 S 3 Panel cut-out (page 31). Panel cut-out (page 31). PC B drilling pattern (page 32). Panel cut-out (page 31).
11 w w w .lem o.com ® ® ø C ø B Ls/Lr K G 5.4 4.5 PN ø V H ø A Fixed socket w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) for printed circuit ED G Part num ber exam ple: ED N .1M .305.XLN N ote: Ls = standard gender, Lr = reverse gender R eference M odel S eries E D G M M E D G 0M E D G 1M E D G 2M E D G 3M E D G TM E D G 4M E D G LM E D G 5M D im ensions (m m ) ABC G H K Ls Lr NP V Fixed socket w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) R eference M odel S eries ED G E D G M M E D G 0M E D G 1M E D G 2M E D G 3M E D G TM E D G 4M E D G LM E D G 5M Part num ber exam ple: ED N .1M .305.XLM ø C ø B Ls/Lr N K Gø V ø A P H N ote: Ls = standard gender, Lr = reverse gender D im ensions (m m ) ABC G H K Ls Lr NP V Fixed socket w ith tw o nuts, key (N ) or keys (P, R , S, T, U , V, W and X) for printed circuit R eference M odel S eries EC G E C G M M E C G 0M E C G 1M E C G 2M E C G 3M E C G TM E C G 4M E C G LM E C G 5M Part num ber exam ple: ECN .1M .305.XLN e ø A ø C ø B Ls/Lr P E maxi G S 2 S 1 S 3 5.4 4.5 N ote: Ls = standard gender, Lr = reverse gender D im ensions (m m ) ABC E e G Ls Lr P S 1 S 2 S 3 Panel cut-out (page 31). PC B drilling pattern (page 32). Panel cut-out (page 31). Panel cut-out (page 31). PC B drilling pattern (page 32).
12 w w w .lem o.com ® ® e ø A Ls/Lr P R E maxi S 2 ø B ø F ø C ø D M X 1.5 S 1 Fixed socket, nut fixing, key (N ) or keys (P, R , S, T, U , V, W and X) w ith m old stop (back panel m ounting) R eference M odel S eries D im ensions (m m ) AB CD E e Ls Lr MPR S 1 S 2 PE G PE G M M PE G 0M PE G 1M PE G 2M PE G 3M PE G TM PE G 4M PE G LM PE G 5M N ote: this m odel is only available w ith m old stop. The dim ensions «F » and «X» are the sam e as the P B G m odels. Ls = standard gender, Lr = reverse gender. Part num ber exam ple: P EN .1M .305.XLM T Fixed socket w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith m old stop PF G ø B ø F ø E ø D X M 1.5 ø C Ss/Sr G K PN ø V ø A H R eference M odel S eries PF G M M PF G 0M PF G 1M PF G 2M PF G 3M PF G TM PF G 4M PF G LM PF G 5M Part num ber exam ple: P F N .1M .305.XLM T D im ensions (m m ) A BCDEFGH K N S s S r V N ote: this m odel is only available w ith m old stop. The dim ensions «M », «P » and «X» are the sam e as the P B G m odels. Ss = standard gender, Sr = reverse gender. Panel cut-out (page 31). Panel cut-out (page 31). e ø A Ls/Lr P R E maxi S 2 ø C S 1 Fixed socket, nut fixing, key (N ) or keys (P, R , S, T, U , V, W and X) w ith M IL-DTL-38999L shell thread R eference M odel S eries D im ensions (m m ) ACE e e1 Ls Lr R S 1 S 2 C ode 1) PE G PE G 1M PE G 2M PE G 3M PE G TM PE G 4M PE G LM PE G 5M N ote: Ls = standard gender, Lr = reverse gender. The dim ension «P » is the sam e as the P B G m odels. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). Part num ber exam ple: P EN .1M .305.XLM M Panel cut-out (page 31).
13 w w w .lem o.com ® ® Fixed socket w ith square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith M IL-DTL-38999L shell thread PF G e ø E ø C Ss/Sr G K PN ø 3.3 ø A H R eference M odel S eries PF G 1M PF G 2M PF G 3M PF G TM PF G 4M PF G LM PF G 5M Part num ber exam ple: P F N .1M .305.XLM M N ote: The dim ension «P » is the sam e as the P B G m odels. Ss = standard gender, Sr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). D im ensions (m m ) AC e E GH K N S s S r C ode 1) Panel cut-out (page 31). Fixed socket w ith antivibration flange, key (N ) or keys (P, R , S, T, U , V, W and X), 2 holes fixing R eference M odel S eries D im ensions (m m ) ABC D G H N P S s S r X PB G PB G M M PB G 0M PB G 1M PB G 2M PB G 3M PB G TM PB G 4M PB G LM PB G 5M Part num ber exam ple: P BN .1M .305.XLM A Ss/Sr X P N G H 2.7 (MM) 3.3 (0M-5M) 1.5 (MM) 2.0 (0M-5M) ø C ø D ø B N ote: Ss = standard gender, Sr = reverse gender Fixed socket w ith antivibration flange, key (N ) or keys (P, R , S, T, U , V, W and X), 2 holes fixing w ith m old stop PB G A Ss/Sr P G ø C ø B ø F ø D M X 1.5 N H 2.7 (MM) 3.3 (0M-5M) 1.5 (MM) 2.0 (0M-5M) R eference M odel S eries D im ensions (m m ) A B CDFGHMN P S s S r X PB G M M PB G 0M PB G 1M PB G 2M PB G 3M PB G TM PB G 4M PB G LM PB G 5M Part num ber exam ple: P BN .1M .305.XLM T N ote: Ss = standard gender, Sr = reverse gender Panel cut-out (page 31). Panel cut-out (page 31).
14 w w w .lem o.com ® ® Fixed socket w ith antivibration square flange, key (N ) or keys (P, R , S, T, U , V, W and X) PV G ø C Ss/Sr P G ø C ø B ø D X N H ø V ø A 1.5 (MM) 2.0 (0M-5M) R eference M odel S eries D im ensions (m m ) ABCD G H N P S s S r VX PV G M M PV G 0M PV G 1M PV G 2M PV G 3M PV G TM PV G 4M PV G LM PV G 5M Part num ber exam ple: P VN .1M .305.XLM N ote: Ss = standard gender, Sr = reverse gender Fixed socket w ith antivibration square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith m old stop PV G ø C Ss/Sr P G ø C ø B ø F ø D M X 1.5 N H ø V ø A 1.5 (MM) 2.0 (0M-5M) R eference M odel S eries D im ensions (m m ) A BCDFGHMN P S s S r X PV G M M PV G 0M PV G 1M PV G 2M PV G 3M PV G TM PV G 4M PV G LM PV G 5M Part num ber exam ple: P VN .1M .305.XLM T N ote: Ss = standard gender, Sr = reverse gender. The dim ension «V» is the sam e as the P V G m odels w ithout m old stop. Fixed socket w ith antivibration flange, key (N ) or keys (P, R , S, T, U , V, W and X), 2 holes fixing w ith M IL-DTL-38999L shell thread R eference M odel S eries D im ensions (m m ) AC e G HN P S s S r C ode 1) PB G PB G 1M PB G 2M PB G 3M PB G TM PB G 4M PB G LM PB G 5M Part num ber exam ple: P BN .1M .305.XLM M A Ss/Sr P N G H 3.3 ø C e N ote: Ss = standard gender, Sr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). Panel cut-out (page 31). Panel cut-out (page 31). Panel cut-out (page 31).
15 w w w .lem o.com ® ® Fixed socket w ith antivibration square flange, key (N ) or keys (P, R , S, T, U , V, W and X) w ith M IL-DTL-38999L shell thread PV G ø C Ss/Sr P G ø C N H ø V ø A e R eference M odel S eries D im ensions (m m ) AC e G HN P S s S r V C ode 1) PV G 1M PV G 2M PV G 3M PV G TM PV G 4M PV G LM PV G 5M Part num ber exam ple: P VN .1M .305.XLM M N ote: Ss = standard gender, Sr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). Panel cut-out (page 31). Free socket, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip and m old stop R eference M odel S eries PM G PM G M M PM G 0M PM G 1M PM G 2M PM G 3M PM G TM PM G 4M PM G LM PM G 5M Part num ber exam ple: P M N .1M .305.XLM T ø A ø C ø B ø F ø D Ls/Lr M P X 1.5 D im ensions (m m ) ABCDF Ls Lr MP X Free socket, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip R eference M odel S eries PM G PM G M M PM G 0M PM G 1M PM G 2M PM G 3M PM G TM PM G 4M PM G LM PM G 5M Part num ber exam ple: P M N .1M .305.XLM ø A ø C ø B ø D Ls/Lr X P D im ensions (m m ) ABCD Ls Lr PX N ote: Ls = standard gender, Lr = reverse gender N ote: Ls = standard gender, Lr = reverse gender
16 w w w .lem o.com ® ® Free socket, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip R eference M odel S eries PH G PH G M M PH G 0M PH G 1M PH G 2M PH G 3M PH G TM PH G 4M PH G LM PH G 5M Part num ber exam ple: P H N .1M .305.XLM Free socket, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip and m old stop R eference M odel S eries PH G PH G M M PH G 0M PH G 1M PH G 2M PH G 3M PH G TM PH G 4M PH G LM PH G 5M Part num ber exam ple: P H N .1M .305.XLM T ø A ø C Ls/Lr P ø B ø F ø D M X 1.5 ø A ø C ø B ø D Ls/Lr X P D im ensions (m m ) ABCD Ls Lr PX D im ensions (m m ) ABCDF Ls Lr MP X N ote: Ls = standard gender, Lr = reverse gender N ote: Ls = standard gender, Lr = reverse gender Free socket, key (N ) or keys (P, R , S, T, U , V, W and X) w ith knurled grip and M IL-DTL-38999L shell thread PM G ø A ø C Ls/Lr P e R eference M odel S eries PM G 1M PM G 2M PM G 3M PM G TM PM G 4M PM G LM PM G 5M Part num ber exam ple: P M N .1M .305.XLM M N ote: Ls = standard gender, Lr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). D im ensions (m m ) AC e Ls Lr P C ode 1)
17 w w w .lem o.com ® ® Free socket, key (N ) or keys (P, R , S, T, U , V, W and X) w ith arctic grip and M IL-DTL-38999L shell thread PH G ø A ø C Ls/Lr P e R eference M odel S eries PH G 1M PH G 2M PH G 3M PH G TM PH G 4M PH G LM PH G 5M Part num ber exam ple: P H N .1M .305.XLM M N ote: Ls = standard gender, Lr = reverse gender. 1) M IL-D TL-389 9 9 L shell size code (backshell not supplied). D im ensions (m m ) AC e Ls Lr P C ode 1) e ø A H ø C Ls/Lr R E maxi N S 1 S 2 Fixed socket, nut fixing, key (N ) or keys (P, R, S, T, U , V, W and X) for printed circuit, w atertight (back panel m ounting) R eference M odel S eries D im ensions (m m ) AC e E H Ls Lr NPR S 1 S 2 H E G H E G M M H E G 0M H E G 1M H E G 2M H E G 3M H E G TM H E G 4M H E G LM H E G 5M Part num ber exam ple: H EN .1M .305.XLN P N ote: Ls = standard gender, Lr = reverse gender. O perating tem perature: -20 °C to +80 °C . W atertight m odel (unm ated) Panel cut-out (page 31). PC B drilling pattern (page 32).
18 w w w .lem o.com ® ® Fibre optic m odels Straight plug, keys (S or W ) w ith knurled grip FM G ø A ø C L P S 1S 2 Free socket, keys (S or W ) w ith knurled grip PM G S 1S 2 ø A ø C L P C ontact part num ber (to be ordered separately): P SS.F 7.12•.LCE23 (2M series). F F S.F 7.12•.LCE23 (5M series). D im ensions (m m ) AC L P S 1 S 2 17.6 17.2 100.6 3.9 14 14 34.0 33.5 148.4 3.4 29 29 Part num ber FM •.2M .03A.XLZT •• Z FM •.5M .03W .XLZT •• Z N ote: •• Cable adaptor defined upon request. The bend relief m ust be ordered separately (see page 29). C ontact part num ber (to be ordered separately): F F S.F 7.12•.LCL23 (2M series). P SS.F 7.12•.LCL23 (5M series). D im ensions (m m ) AC L P S 1 S 2 17.6 17.2 105.8 5.3 16 14 34.0 33.5 155.2 7.9 32 29 Part num ber PM •.2M .03A.XLZT •• Z PM •.5M .03W .XLZT •• Z N ote: •• Cable adaptor defined upon request. The bend relief m ust be ordered separately (see page 29). Straight plug, keys (S or W ) w ith arctic grip FG G L S 1S 2 ø A ø C P C ontact part num ber (to be ordered separately): P SS.F 7.12•.LCE23 (2M series). F F S.F 7.12•.LCE23 (5M series). D im ensions (m m ) AC L P S 1 S 2 18.9 17.2 100.6 3.9 14 14 34.9 33.5 148.4 3.4 29 29 Part num ber FG •.2M .03A.XLZT •• Z FG •.5M .03W .XLZT •• Z N ote: •• Cable adaptor defined upon request. The bend relief m ust be ordered separately (see page 29).
19 w w w .lem o.com ® ® Fixed socket, nut fixing, key (N ) or keys (P, R , S, T, U , V, W and X) EG G ø C e L P D E maxiS 2 S 1 C ontact part num ber (to be ordered separately): F F S.F 7.12•.LCE23 (2M series). P SS.F 7.12•.LCE23 (5M series). Panel cut-out (page 31). Part num ber E G •.2M .03A.XLZ E G •.5M .03W .XLZ Free socket, keys (S or W ) w ith arctic grip PH G ø A ø C P S 1S 2 L C ontact part num ber (to be ordered separately): F F S.F 7.12•.LCL23 (2M series). P SS.F 7.12•.LCL23 (5M series). D im ensions (m m ) AC L P S 1 S 2 18.9 17.2 105.8 5.3 16 14 34.9 33.5 155.2 7.9 32 29 Part num ber PM •.2M .03A.XLZT •• Z PM •.5M .03W .XLZT •• Z N ote: •• Cable adaptor defined upon request. The bend relief m ust be ordered separately (see page 29). Fixed socket w ith square flange, keys (S or W ) ED G ø C ø B L N K Gø 3.3 ø A P H C ontact part num ber (to be ordered separately): F F S.F 7.12•.LCE23 (2M series). P SS.F 7.12•.LCE23 (5M series). D im ensions (m m ) ABC G H K L N P Panel cut-out (page 31). Part num ber E D •.2M .03A.XLZT E D •.5M .03W .XLZT D im ensions (m m ) CD e EL P S 1 S 2 M ore inform ation on F7 fibre optic contact in LEM O F7 catalog.
20 w w w .lem o.com ® ® N ote: Alignm ent device should be ordered as replacem ent item . 8.2 ø 3.2 Part num ber PS S .F7.29 0.N ZZ A lignm ent device for F7 fibre optic contact PSS 125 G 126 G 128 G 62.5/125 The choice of the ferrule hole diam eter is dependent upon the fibre cladding size. LE M O offers a range of ferrule hole diam eters to suit the users’ specific requirem ents. R eference ø C ore/C ladding Ferrule hole N ote (µm ) diam eter (µm ) 125 126
128 G First choice alternative G S pecial order alternative
Set of flat spanners for collet nuts D C P Part num ber D C P.2M .110.TN D C P.5M .110.TN See also F7 tooling in the F7 fibre optic catalog. Tooling F7 contact alignm ent device tool Part num ber D C S .F7.035.PN D C S S im ple tool w ith tw o threaded end for installation/extraction of the F7 contact alignm ent device. C leaning kit Part num ber W S T.K I.125.34 W ST Fibre optic cleaning kit of 2 cotton buds, 1 dry and 1 being soaked in Isopropyl Alcohol used for cleaning the fibre optic contacts .
21 w w w .lem o.com ® ® ø 29.4 ø 28 ø 23.9 ø 25.8 ø 22.7 31.6 10.6 3.4 7.6 1.5 ø 28 M 24 x 1 40.5 7.9 4 maxi 9.4 S 22.5 S 30 FM G.LM .U 2 A .XPA T Straight plug, key (W ) or key (R ) w ith knurled grip and m old stop FG G.LM .U 2 A .XPA T Straight plug, key (W ) or key (R ) w ith arctic grip and m old stop ø 28.5 ø 28 ø 23.9 ø 25.8 ø 22.7 31.6 10.6 3.4 7.6 1.5 U SB m odels ø 28 M 24 x 1 18.9 7.9 4 maxi 9.4 S 22.5 S 30 EG G.LM .U 2 A .XPP Fixed socket, fem ale to fem ale, nut fixing, key (W ) or key (R ) EG G.LM .U 2 A .XPL Fixed socket, nut fixing, key (W ) or key (R ) A lignm ent Key and Polarized Keying System M series connector m odel part num bers are com posed of three letters. The LAS T LE TTE R indicates the keys correspon - ding to a particular contact type. For exam ple, straight plugs w ith N , P, R , U or W keys, are fitted w ith m ale contacts; w hereas w ith S , T, V or X keys, plugs are fitted w ith fem ale contacts. S ockets w ith N , P, R , U or W keys, are fitted w ith fem ale contacts; w hereas w ith S , T, V or X keys, sockets are fitted w ith m ale contacts. Alignm ent K ey Angles αβγδ GG W GG R 9 5° 115° 35° 25° 105° 115° 30° 20° C ontact type Plug S ocket m ale fem ale M odel γ β δ α blue yellow C olour code N b of keys GG X GG V 100° 125° 40° 20° 110° 120° 35° 25° fem ale m ale red orange 5 Front view of a socket TM to 5M 165° 30° 150° 60° 130° 100° Angles βγ GG N GG P GG U C ontact type Plug S ocket m ale fem ale γ β blue yellow green C olour code N b of keys M odel Front view of a socket M M to 3M 155° 50° 135° 9 0° GG S GG T fem ale m ale red orange 3
22 w w w .lem o.com ® ® M ultipole R eference 302 303 305 307 308 304 308 310 312 319 2 M 322 330 N ote: 1) Test voltage according to IE C 60512-2 test 4a. 2) For E G •, E C •, E D •, H E • socket. 302 303 304 305 0 M ø A M ale crim p contacts for plug Fem ale crim p contacts for sockets N um ber of contacts ø A (m m ) C rim p Print (straight) 2) AW G Test voltage (kV rm s) 1) C ontact-contact Test voltage (kV rm s) 1) C ontact-shell R ated current (A) 1) Contact type 22 0.7 GG 22-24-26 1.25 1.15 4.0 30 0.7 GG 22-24-26 1.10 1.00 3.5 2 1.3 GG 16-18-20 1.55 1.10 19 .0 3 1.3 GG 16-18-20 1.05 0.9 5 15.5 5 0.9 GG 20-22-24 1.30 1.30 9 .0 7 0.7 GG 22-24-26 1.45 1.20 7.0 8 0.7 GG 22-24-26 1.30 1.10 5.0 4 1.3 GG 16-18-20 1.55 1.35 15.5 8 0.9 GG 20-22-24 1.9 5 1.10 10.0 10 0.9 GG 20-22-24 1.80 1.20 8.0 12 0.7 GG 22-24-26 1.65 1.15 7.0 19 0.7 GG 22-24-26 1.20 1.00 4.0 2 0.9 GG 20-22-24 1.45 1.00 10.0 3 0.9 GG 20-22-24 1.70 1.40 8.0 4 0.7 GG 22-24-26 1.35 0.9 0 7.0 5 0.7 GG 22-24-26 1.25 1.00 6.5 3 0.5 GG 28-30-32 1.15 0.9 5 3.0 4 0.5 GG 28-30-32 0.9 5 0.9 0 2.0 2 3 Insert configuration 303 304 M M
23 w w w .lem o.com ® ® M ultipole R eference N ote: 1) Test voltage according to IE C 60512-2 test 4a. 2) For E G •, E C •, E D •, H E • socket. 340 348 ø A M ale crim p contacts for plug Fem ale crim p contacts for sockets N um ber of contacts ø A (m m ) C rim p Print (straight) 2) AW G Test voltage (kV rm s) 1) C ontact-contact Test voltage (kV rm s) 1) C ontact-shell R ated current (A) 1) Contact type 40 0.7 GG 22-24-26 1.20 1.35 3.5 48 0.7 GG 22-24-26 1.10 1.35 3.0 2 3 355 368 LM 55 0.9 GG 20-22-24 1.65 1.9 5 3.5 68 0.7 GG 22-24-26 1.40 1.65 2.5 366 114 66 0.9 GG 20-22-24 1.60 1.70 3.0 114 0.7 GG 22-24-26 1.37 1.34 2.0 325 340 TM 25 0.9 GG 20-22-24 1.10 1.25 5.0 40 0.7 GG 22-24-26 1.05 1.20 3.0
24 w w w .lem o.com ® ® Fibre optique R eference M ale contacts for plug Fem ale contacts for sockets N um ber of contacts 03A 2 M 2 03W U 2A LM 4 G 1.20 0.9 5 n.a. M ixed m ultipole R eference 304 1M 306 308 310 2 M N ote: 1) Test voltage according to IE C 60512-2 test 4a. 2) For E G •, E C •, E D •, H E • socket. ø A M ale crim p contacts for plug Fem ale crim p contacts for sockets N um ber of contacts ø A (m m ) C rim p Print (straight) 2) AW G Test voltage (kV rm s) 1) C ontact-contact Test voltage (kV rm s) 1) C ontact-shell R ated current (A) 1) Contact type 2 3 U SB R eference M ale front view Fem ale front view N um ber of contacts S older contact Test voltage (kV rm s) 1) C ontact-contact Test voltage (kV rm s) 1) C ontact-shell R ated current (A) 1) stop in anthracite nickel-plated alum inium alloy, PE E K insulator, m ale crim p contacts. nickel-plated alum inium alloy, PE E K insulator, m ale crim p contacts.
25www.lemo.com ® ® Crimp contacts for plugs, free or fixed sockets Reference C B D Contact type Male crimp with standard crimp barrel (fig. 1) Male crimp with reduced crimp barrel (fig. 2) Male straight print Reference M P N Contact type Female crimp with standard crimp barrel (fig. 1) Female crimp with reduced crimp barrel (fig. 2) Female straight print Dimension of crimp barrels ø A ø A ø C ø C Fig. 1 ø A ø C ø A ø C Fig. 2 Contacts Conductor AWG Section (mm 2) min. max. min. max. 20 16 0.616 2.000 24 20 0.204 0.616 26 22 0.128 0.382 26 22 0.128 0.382 32 28 0.032 0.092 Ref. contact type Male Female Contact ø A ø C Form (mm) (mm) per fig. 1.3 1.60 1 0.9 1.10 1 0.9 0.87 2 0.7 0.87 1 0.7 0.44 2 CM CM BP CM BP Note: In order to satisfy crimp pull-test requirements to the IEC 60352-2 standard, the use of single strand cables should be avoided. Part number For male contacts For female contacts 0M to 3M MM 20 16 0.616 2.000 24 20 0.204 0.616 26 22 0.128 0.382 26 22 0.128 0.382 32 28 0.032 0.092 1.3 1.60 1 0.9 1.10 1 0.9 0.87 2 0.7 0.87 1 0.7 0.44 2 CM CM BP CM BP TM to 5M
26 w w w .lem o.com ® ® B lanking caps for plugs B M F Part num ber BM F.M M .100. •AV BM F.0M .100. •AV BM F.1M .100. •AV BM F.2M .100. •AV BM F.3M .100. •AV BM F.TM .100. •AV BM F.4M .100. •AV BM F.LM .100. •AV BM F.5M .100. •AV D im ensions (m m ) ACLNPX sliding loop L X N P ø C ø A sliding loop L X N P ø C ø A B lanking caps for plugs B G F Part num ber BG F.M M .100. •AV BG F.0M .100. •AV BG F.1M .100. •AV BG F.2M .100. •AV BG F.3M .100. •AV BG F.TM .100. •AV BG F.4M .100. •AV BG F.LM .100. •AV BG F.5M .100. •AV D im ensions (m m ) ACLNPX Accessories L X P ø C ø A N ø 3.5 B lanking caps for fixed sockets B M E Part num ber BM E .M M .200. •AZ BM E .0M .200. •AZ BM E .1M .200. •AZ BM E .2M .200. •AZ BM E .3M .200. •AZ BM E .TM .200. •AZ BM E .4M .200. •AZ BM E .LM .200. •AZ BM E .5M .200. •AZ D im ensions (m m ) ACLNPX L X P ø C ø A N ø 3.5 B lanking caps for fixed sockets B G E Part num ber BG E .M M .200. •AZ BG E .0M .200. •AZ BG E .1M .200. •AZ BG E .2M .200. •AZ BG E .3M .200. •AZ BG E .TM .200. •AZ BG E .4M .200. •AZ BG E .LM .200. •AZ BG E .5M .200. •AZ D im ensions (m m ) ACLNPX
27 w w w .lem o.com ® ® sliding loop L X N P ø C ø A B lanking caps for free sockets B G F Part num ber BG F.M M .200. •AZ BG F.0M .200. •AZ BG F.1M .200. •AZ BG F.2M .200. •AZ BG F.3M .200. •AZ BG F.TM .200. •AZ BG F.4M .200. •AZ BG F.LM .200. •AZ BG F.5M .200. •AZ D im ensions (m m ) ACLNPX B lanking caps for free sockets B M F Part num ber BM F.M M .200. •AZ BM F.0M .200. •AZ BM F.1M .200. •AZ BM F.2M .200. •AZ BM F.3M .200. •AZ BM F.TM .200. •AZ BM F.4M .200. •AZ BM F.LM .200. •AZ BM F.5M .200. •AZ D im ensions (m m ) ACLNPX sliding loop L X N P ø C ø A Note: these caps are suitable for use w ith any alignm ent key configuration. The position « •» of the part num ber indicates the housing m aterial . S ee page 4. L X P ø C ø A ø B ø E N B lanking caps, large w asher for EC G/PE G/H E G fixed sockets B G K Part num ber BG K .M M .200. •AZ BG K .0M .200. •AZ BG K .1M .200. •AZ BG K .2M .200. •AZ BG K .3M .200. •AZ BG K .TM .200. •AZ BG K .4M .200. •AZ BG K .LM .200. •AZ BG K .5M .200. •AZ D im ensions (m m ) ABCELN P X ø B ø E L X P ø C ø A N B lanking caps, large w asher for EC G/PE G/H E G fixed sockets B M K Part num ber BM K .M M .200. •AZ BM K .0M .200. •AZ BM K .1M .200. •AZ BM K .2M .200. •AZ BM K .3M .200. •AZ BM K .TM .200. •AZ BM K .4M .200. •AZ BM K .LM .200. •AZ BM K .5M .200. •AZ D im ensions (m m ) ABCELN P X
28 w w w .lem o.com ® ® G E A.00.240.R L G E A.0S .240.R L G E A.1M .240.R L G E A.0E .240.R L G E A.1E .240.R L G E A.3S .240.R L G E A.4M .240.R L G E A.3E .240.R L G E A.5M .240.R L H exagonal nuts for E G G m odel e L A øB Part num ber G M aterial: N ickel-plated alum inium alloy (anthracite colour) G EA D im ensions (m m ) S eries AB e L M M 9 10.2 M 7x0.50 2.0 0M 11 12.4 M 9 x0.60 2.0 1M 13 14.5 M 11x1.00 2.5 2M 17 19 .2 M 14x1.00 2.5 3M 19 21.5 M 16x1.00 3.0 TM 22 25.0 M 18x1.00 3.0 4M 25 28.0 M 21x1.00 4.0 LM 30 34.0 M 24x1.00 5.0 5M 36 40.5 M 30x1.00 5.0 C onical nut for m odels H E G, E C G, P E G A e L ø B Part num ber G E C .M M .240.R N G E C .0M .240.R N G E C .0E .240.R N G E C .2M .240.R N G E C .3M .240.R N G E C .TM .240.R N G E C .4M .240.R N G E C .LM .240.R N G E C .5M .240.R N G M aterial: N ickel-plated alum inium alloy (anthracite colour) G EC D im ensions (m m ) S eries AB e L M M 11 14 M 10x0.50 2.5 0M 14 17 M 13x0.75 3.2 1M 16 18 M 14x1.00 3.0 2M 18 21 M 17x1.00 3.2 3M 20 23 M 19 x1.00 3.2 TM 23 27 M 22x1.00 5.0 4M 25 29 M 24x1.00 5.0 LM 29 33 M 28x1.00 5.0 5M 34 38 M 33x1.00 5.0 H exagonal nuts for E C G m odel e L A øB G EA D im ensions (m m ) S eries AB e LPart num ber G E A.M M .241.R L G E A.0M .241.R L G E A.0E .240.R L G E A.2M .241.R L G E A.3M .241.R L G E A.TM .241.R L G E A.4M .241.R L G E A.LM .241.R L G E A.5M .241.R L G M aterial: N ickel-plated alum inium alloy (anthracite colour) M M 12 13.5 M 10x0.50 2.5 0M 16 18.2 M 13x0.75 2.5 1M 17 19 .2 M 14x1.00 2.5 2M 19 21.5 M 17x1.00 3.0 3M 25 22.0 M 19 x1.00 3.0 TM 25 28.0 M 22x1.00 3.0 4M 30 34.0 M 24x1.00 3.0 LM 32 36.0 M 28x1.00 3.0 5M 37 41.0 M 33x1.00 3.0
29www.lemo.com ® ® AFTER HEATING BEFORE HEATING Heatshrink bootStraight boot AFTER HEATING BEFORE HEATING Elbow boot A bend relief made from thermoplastic polyurethane elastomer (Desmopan 786) can be fitted over LEMO plugs and sock- ets that are supplied with nut for fitting such bend relief. An other bend relief has been designed for connectors used in applications at high temperature or requiring vapour sterilization. These bend reliefs are different from previous ones as for their material, a silicone elastomer which is noted for its retention of flexibility over a wide temperature range. Bend relief (for M series fibre optic model only)GMA Note: Please see unipole/multipole catalogue for bend relief dimensions. The last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on the right and replace the letter «G» by the letter of the required colour. Main characteristics G Material: Polyurethane elastomer G Temperature range in dry atmosphere: -40°C +80°C G Material: Silicone elastomer VMQ G Temperature range in dry atmosphere: -60°C +200°C G Temperature range in water steam: +140°C Part number (Polyurethane) Series GMA.2B.0••.DG 5MGMA.4B.0••.DG Ref. A B G Colour blue white grey Ref. J M N Colour yellow brown black Ref. R S V Colour red orange green Part number (Silicone) GMA.2B.0••.RG GMA.4B.0••.RG LEMO Raychem® Note: 1) modified elastomer resistant to fluids with hot melt sealant. 2)elastomer resistant to fluids. We recommend a thermosetting sealant with this type of boot. Supplier Part number Series Straight Elbow 90° 0M-2M 202 A 111-25/86 222 A 111-25/86 1) 3.8 2M-4M 202 A 121-25/86 222 A 121-25/861) 5.3 4M-5M 202 A 142-25/86 222 A 142-25/861) 7.4 cable ø min. (mm)Note
D C M .65.120.AZ D C M .65.140.AZ D C M .65.160.AZ D C M .65.180.AZ D C M .65.200.AZ D C M .65.230.AZ D C M .65.250.AZ D C M .65.29 0.AZ D C M .65.340.AZ D C M .65.000.4PA D C M .65.040.8PA ® ® w w w .lem o.com 30 Front conical nut tightening tools D C M These positioners are suitable for use w ith both m anual and pneum atic crim ping tools according to the M IL-C -22520/7-01 standard. Positioners for crim p contacts D C E M ale D C E .9 1.130.5M VC D C E .9 1.09 0.5M VC D C E .9 1.070.5M VC D C E .9 1.050.0VC Positioners part num ber For m ale contacts C ontact C ontact ø S ize 1.3 0M -5M 0.9 0M -5M 0.7 0M -5M
0.5 M M
Extractors for crim p contacts D C F Part num ber D C F.9 3.131.4LT D C F.9 3.09 0.4LT D C F.9 3.070.4LT D C F.9 1.050.2LT C ontact ø 1.3 0.9 0.7
0.5 N ote: this m odel is used for m ale
and fem ale contacts. Fem ale contact insertion tool D C V Part num ber D C V.13.05M .LA D C V.09 .05M .LA D C V.07.05M .LA C ontact ø 1.3 0.9 0.7 D C E .9 1.130.5M VM D C E .9 1.09 0.3M VM D C E .9 1.09 T.5M VM D C E .9 1.070.3M VM D C E .9 1.07T.5M VM D C E .9 1.050.0VM Positioners part num ber For fem ale contacts C ontact C ontact ø S ize 1.3 0M -5M 0M -3M 0.9 TM -5M 0M -3M 0.7 TM -5M Front conical nut S panner For m odels E C G , H E G , PE G E C G , H E G , PE G E C G , H E G , PE G E C G , H E G , PE G E C G , H E G , PE G E C G , H E G , PE G E C G , H E G , PE G E C G , H E G , PE G E C G , H E G , PE G Torque (N m ) 1.0 1.0 1.5 2.0 2.5 4.0 5.0 6.5 8.0 S eries M M TM LM Front conical nut S panner
www.lemo.com ® ® Part number DPC.91.701.V According to specification MIL-C-22520/7-01. For LEMO contacts ø 0.5-0.7-0.9-1.3 mm Manual crimping toolDPC Cut-outs Series MM TM LM Torque (Nm) 1.0 1.0 1.5 2.0 2.5 4.0 5.0 6.5 8.0 Mounting nut torque (on panel) B + 0.1 ø A + 0.1 EG●-EC●-HE●-PE● ø A + 0.1 H + 0.1 H + 0.1 B ED●-FA●-FW●-FX●-PV●-PF●ø A + 0.1 H + 0.1 B PB● Series MM TM LM EG● EC●/HE●/PE● ø A B ø A B 7.1 6.4 10.1 9.1 9.1 8.3 13.1 11.6 11.1 9.6 14.1 12.6 14.1 12.6 17.1 15.6 16.1 14.6 19.1 17.6 18.1 16.6 22.1 20.6 21.1 19.6 24.1 22.6 24.1 22.6 28.1 26.6 30.1 28.6 33.1 31.6 Cut-outs Series MM TM LM ø A B H ø A B H ø A B H ø A B H Cut-outs Series MM PB● ø A B H 11.6 M2.5 16.2 14.8 M3.0 21.4 16.8 M3.0 23.4 19.8 M3.0 26.4 21.8 M3.0 29.0 Series TM LM PB● ø A B H 24.8 M3.0 32.5 27.8 M3.0 35.0 30.8 M3.0 38.0 37.8 M3.0 45.0 Panel Cut-Out 600-061 A30199 ACDBS100 600-057 A31189 AXCL0Z Banding tool Tie wrap Part number GLEN-AIR® TIE-DEX® AXON® Banding tool Note: the banding tool is to be used with screened cables to ensure a good ground contact.
32 w w w .lem o.com ® ® 4 x ø 1 +0.1 For H E G m odels For E G G , E C G and E D G m odels Fixed socket w ith straight print contact 4 x ø 1 +0.1 2 x ø 0.8 +0.1 ø 2.2 5.08 0M .302 4 x ø 1 +0.1 3 x ø 0.8 +0.1 ø 2.3 120 ° 5.08 0M .303 4 x ø 1 +0.1 4 x ø 0.8 +0.1 90 ° ø 2.5 45 ° 5.08 0M .304 4 x ø 1 +0.1 5 x ø 0.8 +0.1 72 ° ø 2.8 5.08 0M .305 4 x ø 1 +0.1 5 x ø 0.8 +0.1 72 ° ø 3.4 7.62 1M .305 4 x ø 1 +0.1 2 x ø 1.1 +0.1 ø 2.8 7.62 1M .302 4 x ø 1 +0.1 3 x ø 1.1 +0.1 ø 3.1 7.62 120 ° 1M .303 4 x ø 1 +0.1 2 x ø 0.8 +0.1 2 x ø 1.1 +0.1 ø 3.8 ø 2.8 7.62 1M .304. •R 4 x ø 1 +0.1 7 x ø 0.8 +0.1 ø 3.7 60 ° 30 ° 7.62 1M .307 ø 3.8 8 x ø 0.8 +0.1 51° 26' 4 x ø 1 +0.1 7.62 1M .308 4 x ø 1 +0.1 3 x ø 1.1 +0.1 ø 6.2 ø 5.1 3 x ø 0.8 +0.1 120 ° 60 ° 8.89 2M .306. •R 4 x ø 1 +0.1 8 x ø 0.8 +0.1 ø 6.4 45 ° 8.89 2M .308 4 x ø 1 +0.1 6 x ø 0.8 +0.1 ø 6.2 5.1 2.4 2 x ø 1.1 +0.1 60 ° 8.89 60 ° 2M .308. •R 4 x ø 1 +0.1 8 x ø 0.8 +0.1 ø 6.2 5.1 2.4 2 x ø 1.1 +0.1 50 ° 8.89 50 ° 2M .310. •R 4 x ø 1 +0.1 10 x ø 0.8 +0.1 ø 6.2 ø 2.15 45° 22°30 ' 8.8 9 2M .310 ø 2.8 ø 6.5 12 x ø 0.8 +0.1 90 ° 45 ° 45 ° 22 °30' 4 x ø 1 +0.1 8.89 2M .312 4 x ø 1 +0.1 4 x ø 1.1 +0.1 ø 4.8 45 ° 8.89 2M .304 PC B drilling pattern 4 x ø 1 +0.1 3 x ø 0.6 +0.1 ø 1.35 120 ° 5.08 M M .303 4 x ø 1 +0.1 ø 1.6 4 x ø 0.6 +0.1 90 ° 45 ° 5.08 M M .304
33 w w w .lem o.com ® ® ø 3.5 ø 6.7 30 °60 ° 19 x ø 0.8 +0.1 15 ° 4 x ø 1 +0.1 8.89 2M .319 36 ° 30 x ø 0.8 +0.1 2.2 ø 5.7 4.45 2.6 3.23 11 °15' ø 9 22° 30' 4 x ø 1 +0.1 10.16 3M .330 45 ° 22 x ø 0.8 +0.1 22 °30' ø 5 ø 8.8 12 °52' 25° 43' 4 x ø 1 +0.1 10.16 3M .322 4 x ø 1 +0.1 06°55'30'' 66 x ø 0.8 +0.1 ø 5.6 ø 10.08 27°41'30'' 18°57' ø14.96 ø19.84 13° 51' 51° 26' 20.32 4 x ø 1 +0.1 114 x ø 0.8 + 0.1 6°12’25’’ 10 ° 40° ø 9.9 ø 6.3 ø 13.5 ø 17.1 8°10’55’’ 120° 20.32 20.7 24° ø 2.7 12°24’50’’ 16°21’49’’ 5M .366 5M .114 4 x ø 1 +0.1 55 x ø 0.8 +0.1 ø 2.8 10°35’18’’ 18° ø 6.9 ø 11.1 ø 15.3 16.51 7°30’ 21° 10’35’’ 36° 15° LM .355 4 x ø 1 +0.1 68 x ø 0.8 +0.1 ø 4.25 13°51’ 51°25’30’’ ø 8 ø 11.75 ø 15.5 16.51 6°40’ 27° 41’30’’ 18° 13° 20’ LM .368 48 x ø 0.8 +0.1 ø 11.9 24° ø 5.2 ø 8.5 ø 1.9 22°30' 8°10'55'' 12° 45° 4 x ø 1 +0.1 13.97 16° 21'49'' 120° 25 x ø 0.8 +0.1 ø 9.8 ø 5.8 24°40° 4 x ø 1 +0.1 12.7 TM .325 4M .348 40 x ø 0.8 +0.1 ø 11.64 51 °26' 18 ° ø 4.24 ø 7.94 4 x ø 1 +0.1 13.97 27° 41'32'' 4M .340 40 x ø 0.8 +0.1 ø 10.2 60 ° 18 ° ø 3.4 ø 6.8 4 x ø 1 +0.1 12.7 27° 41'32'' TM .340
34 w w w .lem o.com ® ® A ssem bly instructions for plugs and sockets 2 1 FG ● PH ● PB ● 1. C able preparation First place the heatshrink boot over the cable. S trip the cable accor ding to dim ensions of the table, then w iden the shield. 2 . Cable term ination 2 .1 W ith shielded cables, w iden and pull the shield all the w ay to the back. Fix the appropriate positioner onto the crim ping tool and set the selec - tor to the num ber corresponding to the AW G of the conductor used as indicated on the positioner label. Fit the conductor into the contact ; m ake sure it is visible through the contact’s inspection hole. S lide the conductor-contact assem bly into the open crim ping tool; m ake sure that the contact is pushed fully into the positioner. C lose the tool. R em ove from crim ping tool and check that conductor is secure in contact and show s in inspection hole. 2 .2 Arrange the conductor-contact assem blies according to the m arkings, into the rear cable seal. Push them deeply into the insulator, using tw eezers if necessary; check that all the contacts are correctly located in the insulator: 1) by verifying the alignm ent of the contacts at the front of the insulator and 2) by gently pulling on each conductor. Verification should also be m ade using the appropriate retention tes - ting tool. 2 .3 Bring the shield around the rear of connector. S ecure it w ith a band-it tie-w rap (not furnished) to fix the shield in place. C ut off the possible shield surplus. 2 .4 Put the heatshrink boot in place and heat gently until it retracts. S eries LST 0M to 5M 20 15 3.5 1T ± 0.2 L ± 0.5 S ± 0.5 Crimp 2 Crimp 2 Steel tie-wrap band ( ~3 mm wide) Steel tie-wrap band ( ~3 mm wide) Heat Heat N ot e: dim ensions are in m m .
35 w w w .lem o.com ® ® A ssem bly instructions for plugs and sockets (w ith optional m old stop) FG ● PH ● PB ● T ± 0.2 L ± 0.5 S ± 0.5 Crimp 1 Crimp 1 Steel tie-wrap band ( ~3 mm wide) Steel tie-wrap band ( ~3 mm wide) Overmolding Overmolding 1. C able preparation S trip the cable accor ding to dim en - sions of the table, then widen the shield. 2 . Cable term ination 2 .1 W ith shielded cables, w iden and pull the shield all the w ay to the back. Fix the appropriate positioner onto the crim ping tool and set the selec - tor to the num ber corresponding to the AW G of the conductor used as indicated on the positioner label. Fit the conductor into the contact ; m ake sure it is visible through the contact’s inspection hole. S lide the conductor-contact assem bly into the open crim ping tool; m ake sure that the contact is pushed fully into the positioner. C lose the tool. R em ove from crim ping tool and check that conductor is secure in contact and show s in inspection hole. 2 .2 Arrange the conductor-contact assem blies according to the m arkings, into the rear cable seal. Push them deeply into the insulator, using tw eezers if necessary; check that all the contacts are correctly located in the insulator: 1) by verifying the alignm ent of the contacts at the front of the insulator and 2) by gently pulling on each conductor. Verification should also be m ade using the appropriate retention tes - ting tool. 2 .3 Bring the shield around the rear of connector until the m old stop. S ecure it w ith a band-it tie-w rap (not furnished) to fix the shield in place. C ut off the possible shield surplus. 2 .4 C ustom overm old cable assem bly. S eries LST 0M to 5M 20 15 3.5 N ot e: dim ensions are in m m .
36 w w w .lem o.com ® ® N otes
37 w w w .lem o.com ® ® D ata subject to change PLEA SE R EA D A N D FO LLO W A LL IN STU C TIO N S C A R EFU LLY A N D C O N SU LT A LL R ELEVEN T N A TIO N A L A N D IN TER N A TIO N A L SA FETY R EG U LA TIO N S FO R YO U R A PPLIC A TIO N . IM PR O PER H A N D LIN G , C A B LE A SSEM B LY, O R W R O N G U SE O F C O N N EC TO R S C A N R ESU LT IN H A ZA R D O U S SITU A TIO N S. 1. SH O C K A N D FIR E H A ZA R D Incorrect w iring, the use of dam aged com ponents, presence of foreign objects (such as m etal debris), and / or residue (such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock. M ated com ponents should never be disconnected w hile live as this m ay result in an exposed electric arc and local overheating, resulting in possible dam age to com ponents. 2 . H A N D LIN G C onnectors and their com ponents should be visually inspected for dam age prior to installation and assem bly. S uspect com ponents should be rejected or returned to the factory for verification. C onnector assem bly and installation should only be carried out by properly trained personnel. Proper tools m ust be used during installation and / or assem bly in order to obtain safe and reliable perform ance. 3. U SE C onnectors w ith exposed contacts should never be live (or on the current supply side of a circuit). U nder general conditions voltages above 30 VAC and 42 VD C are considered hazardous and proper m easures should be taken to elim inate all risk of transm ission of such voltages to any exposed m etal part of the connector. 4. TEST A N D O PER A TIN G VO LTA G ES The m axim um adm issible operating voltage depends upon the national or international standards in force for the application in question. Air and creepage distances im pact the operating voltage; reference values are indicated in the catalog how ever these m ay be influenced by PC board design and / or w iring harnesses. The test voltage indicated in the catalog is 75% of the m ean breakdow n voltage; the test is applied at 500 V/s and the test duration is 1 m inute. 5. C E M A R K IN G C E m arking m eans that the appliance or equipm ent bearing it com plies w ith the protection requirem ents of one or several E uropean safety directives. C E m arking applies to com plete products or equipm ent, but not to electrom echanical com ponents, such as connectors . 6. PR O D U C T IM PR O VEM EN TS The LE M O G roup reserves the right to m odify and im prove to our products or specifications w ithout providing prior notification. Product safety notice N o reproduction or use w ithout express perm ission of editorial or pictorial content, in any m anner. LE M O reserve the right at all tim es to m odify and im prove specifications w ithout any notification.
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com LEMO SUBSIDIARIES LEMO DISTRIBUTORS AUSTRALIA, BRAZIL, CHILE, CZECH REPUBLIC, GREECE, INDIA, ISRAEL, NEW ZEALAND, PAKISTAN, POLAND, RUSSIA, SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE www.lemo.com AUSTRIA LEMO Elektronik GesmbH Lemböckgasse 49/E6-3
1230 Wien
Tel: (+43 1) 914 23 20 0 Fax:(+43 1) 914 23 20 11 sales@lemo.at CANADA LEMO Canada Inc
44 East Beaver Creek Road, unit 20
Richmond Hill, Ontario L4B 1G8 Tel: (+1 905) 889 56 78 Fax: (+1 905) 889 49 70 info-canada@lemo.com CHINA LEMO Electronics (Shanghai) Co., Ltd 5th Floor, Block 6, City of ELITE,
1000 Jinhai Road, Pudong
Shanghai, China 201206 Tel: (+86 21) 5899 7721 Fax: (+86 21) 5899 7727 cn.sales@lemo.com DENMARK LEMO Denmark A/S Gammel Mosevej 46
2820 Gentofte
Tel: (+45) 45 20 44 00 Fax: (+45) 45 20 44 01 info-dk@lemo.com FRANCE LEMO France Sàrl 24/28 Avenue Graham Bell Bâtiment Balthus 4 Bussy Saint Georges
77607 Marne la Vallée Cedex 3
Tel: (+33 1) 60 94 60 94 Fax: (+33 1) 60 94 60 90 info-fr@lemo.com GERMANY LEMO Elektronik GmbH Hanns-Schwindt-Str. 6
81829 München
Tel: (+49 89) 42 77 03 Fax: (+49 89) 420 21 92 info@lemo.de HONG KONG LEMO Hong Kong Ltd Unit 1207, 12/F, Corporation Square,
8 Lam Lok Street, Kowloon Bay,
Tel: (+852) 2174 0468 Fax: (+852) 2174 0492 hk.sales@lemo.com HUNGARY REDEL Elektronika Kft Nagysándor József u. 6-12
1201 Budapest
Tel: (+36 1) 421 47 10 Fax: (+36 1) 421 47 57 info-hu@lemo.com ITALY LEMO Italia srl Viale Lunigiana 25
20125 Milano
Tel: (+39 02) 66 71 10 46 Fax: (+39 02) 66 71 10 66 sales.it@lemo.com JAPAN LEMO Japan Ltd 2-7-22, Mita, Minato-ku, Tokyo, 108-0073 Tel: (+81 3) 54 46 55 10 Fax: (+81 3) 54 46 55 11 lemoinfo@lemo.co.jp NETHERLANDS / BELGIUM LEMO Connectors Benelux De Trompet 1060
1967 DA Heemskerk
Tel. (+31) 251 25 78 20 Fax (+31) 251 25 78 21 info@lemo.nl NORWAY / ICELAND LEMO Norway A/S Stanseveien 6B
0975 Oslo
Tel: (+47) 22 91 70 40 Fax: (+47) 22 91 70 41 info-no@lemo.com SINGAPORE LEMO Asia Pte Ltd
4 Leng Kee Road,
#06-09 SiS Building Singapore 159088 Tel: (+65) 6476 0672 Fax: (+65) 6474 0672 sg.sales@lemo.com SPAIN / PORTUGAL IBERLEMO SAU Brasil, 45, 08402 Granollers Barcelona Tel: (+34 93) 860 44 20 Fax: (+34 93) 879 10 77 info-es@lemo.com SWEDEN / FINLAND LEMO Nordic AB Mariehällsvägen 39A 168 65 Bromma Tel: (+46 8) 635 60 60 Fax: (+46 8) 635 60 61 info-se@lemo.com SWITZERLAND LEMO Verkauf AG Grundstrasse 22 B
6343 Rotkreuz
Tel: (+41 41) 790 49 40 Fax: (+41 41) 790 49 43 ch.sales@lemo.com UNITED KINGDOM LEMO UK Ltd 12-20 North Street Worthing, West Sussex, BN11 1DU Tel: (+44 1903) 23 45 43 Fax: (+44 1903) 20 62 31 lemouk@lemo.com USA LEMO USA Inc P.O. Box 2408 Rohnert Park, CA 94927-2408 Tel: (+1 707) 578 88 11 (+1 800) 444 53 66 Fax:(+1 707) 578 08 69 info@lemousa.com © CAT.MM.LEN.P0811 - Updated September 2014