BLGE2-252R MINI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Lopw phase unbalance, 2 deg. and amplitude unbalance, 0.05 dB typ.
- Miniature size 0805 (2.0x1.2mm)
- LTCC construction
- low cost
- aqueous washable
Applications
- ISM Band
- WLAN/Wi-Fi
- Bluetooth
- Zigbee Ceramic Balun Outline Drawing FREQUENCY (GHz) INSERTION LOSS (dB) INPUT R. LOSS (dB) AMPLITUDE UNBALANCE (dB) PHASE UNBALANCE (Deg.) * Tested on Evaluation Board TB-1035+ † Relative to 180° 0.5 0.6 0.7 0.8 INSERTION LOSS (dB) FREQUENCY (GHz) BLGE2-252R+ INSERTION LOSS 0.00 0.04 0.08 0.12 0.16 0.20 AMPLITUDE UNBALANCE (dB) FREQUENCY (GHz) BLGE2-252R+ AMPLITUDE UNBALANCE 0.0 1.0 2.0 3.0 4.0 5.0 6.0 PHASE UNBALANCE (deg.) FREQUENCY (GHz) BLGE2-252R+ PHASE UNBALANCE ** Measured with Agilent E5071B network analyzer using impedance conversion and port extension. Evaluation Board MCL P/N: TB-BLGE2-252R+ Suggested PCB Layout (PL-264) Pad Connections PRIMARY DOT (Unbalanced Port) 1 PRIMARY (GND) or DC Feed 2 SECONDARY DOT (Balanced) 3 SECONDARY (Balanced) 4 NO CONNECTION 6 NOT USED (GND Externally) 5 Outline Dimensions ( )inch mm Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 20, 50, 100, 200, 500,1000, 4000 Suggested Layout, Tolerance to be within±.002 PCB Land Pattern ABCDEF GH J K wt .026 .014 .039 .110 grams Parameter Frequency (MHz) Min. Typ. Max. Unit Impedance Ratio 2 Frequency Range 2400 — 2500 MHz Insertion Loss* 2400 - 2500 — 0.7 1.1 dB Amplitude Unbalance 2400 - 2500 — 0.05 1.6 dB Phase Unbalance† 2400 - 2500 — 2 ±10 Degree Unbalance Return Loss 2400 - 2500 9.5 17 — dB *Refer to product storage temperature after installation. Suggestion for T&R unused product storage condition: +5~+35°C, Humidity 45~75%RH, 12 Month max. Permanent damage may occur if any of these limits are exceeded. CASE STYLE: GE0805C-9 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Pads 2, 3, 4 are DC-connected internally Pad 6 must be open (See PL-264 below) configuration J NO CONNECTION* PRI SEC *Internal open circuit