BLG0001 BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Order Code: BLG0001 Internet www.balluff.com eCl@ss 9.1: 27-27-09-10 Subject to change without notice: 157358 ETIM 6.0: EC002549 BLG0001_0.76_2024-08-23 1) Sensing surface, 2) Sensing surface, 3) Output function, 4) stability/error, 5) Operating voltage Basic features Approval/Conformity CE UKCA WEEE Basic standard IEC 60947-5-2 Principle of operation Light grid Series 1-010 Style Square Connection 90° Display/Operation Display Output function- LED yellow LED green: Power Error - LED green, alt. Stability - LED green Electrical connection Connection Connector, M12x1-Male Connection 2 M12x1 Polarity reversal protected yes Protection against device mix-ups yes Short-circuit protection yes Electrical data Input function Synchronization (Emitter) Operating voltage Ub 20...28 VDC Rated operating current Ie 100 mA Rated operating voltage Ue DC 24 V Ripple max. (% of Ue) 15 % Switching frequency 250 Hz Turn-off delay toff max. 2 ms Turn-on delay ton max. 2 ms Utilization category DC -13
Order Code: BLG0001 Internet www.balluff.com eCl@ss 9.1: 27-27-09-10 Subject to change without notice: 157358 ETIM 6.0: EC002549 BLG0001_0.76_2024-08-23 Environmental conditions Ambient temperature 0...55 °C Contamination scale 3 EN 60068-2-27, Shock Half-sinus, 30 g , 11 ms, 3x6 EN 60068-2-6, Vibration 55 Hz, amplitude 0.5 mm, 3x30 min IP rating IP65 Functional safety MTTF (40 °C) 44 a Interface Analog output Analog, voltage 0…10 V Supplementary output Synchronization (Receiver) Switching output PNP normally open (NO) Material Housing material Aluminium, Anodized Material sensing surface PMMA Surface protection Anodized Mechanical data Dimension 22 x 150.1 x 43.2 mm Mounting part Screw M4 Optical features Beam characteristic Divergent Blind zone 150 mm Light beams, number 32 Light type Infrared Principle of optical operation Through-beam sensor Smallest part typ. 5.0 at t 0.5 x Sn, R 0 = 2.1 m Switching function, optical dark-on Wave length 880 nm Range/Distance Active length AL 1 100 mm Range 0...2.1 m Rated operating distance Sn 2.1 m Resolution ≤ 3.5 mm Remarks Mounting bracket included, order other accessories separately. For additional information, refer to user's guide. Reference object (target): Steel plate, 50 x 50, thickness 0.5 mm, lateral approach. The sensor is functional again after the overload has been eliminated. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. n Connector Drawings
Order Code: BLG0001 Internet www.balluff.com eCl@ss 9.1: 27-27-09-10 Subject to change without notice: 157358 ETIM 6.0: EC002549 BLG0001_0.76_2024-08-23 Wiring Diagrams (Schematic) Opto Symbols