BK13 HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 14

Technical content

0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Mar. 2024 Product Page https://www.hirose.com/en/product/series/BK13C/

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A

Features

  1. Hybrid Power Supply Capacity and Space-saving Design Equipped with two power contacts capable of handling up to 5A, reducing the number of signal contacts to save mounting space. 2. Robust Design Fully armored guides prevent housing damage due to misalignment when mating. 3. Enhanced PCB Peeling Strength Both the plug and receptacle have 3 soldering areas at each power contact for greater PCB peeling strength. High Current (5A) Power lines typically diverted to multiple signal contacts are concentrated into 2 power contacts (Up to 5A/line) 5.85mm Reduced Power Contact Power Contact 13.7mm 7.85mm Conventional Product (P=0.35mm) Signal 64pos. BK13 Signal 32pos.+ Power 2pos. 43% Reduced Fully Armored Design <Conventional Products> <BK13> No metal Only Partially Covered with Metal Exposed Housing Housing Covered by Metal Back Side of the Receptacle Back Side of the Plug A < A > < B > < A' > < B' > B

3 Solder Areas

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A 4. High Contact Reliability Both power and signal contacts have a two-point contact design, ensuring high contact reliability. 5. Superior Mating Wide self-alignment range with metal guides offers enhanced mating operation. (0.3mm in pitch direction, 0.22mm in width direction) Additionally, a clear tactile click generated by the unique locking contact design secures complete mating. 6. Halogen-Free All materials and substances used to produce this product Comply with Halogen-free standards. * As defined by IEC 61249-2-21 Br : 900ppm max., Cl : 900ppm max., Br+Cl : 1,500ppm max.

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Product Specifications Rated Current Signal Contact : 0.3A (Note 1) Operating Temperature (Note 2) -55 to +85℃ Operating Humidity Range (Note 4) 20 to 80% Power Contact : 5A Storage Temperature (Note 3) -10 to +60℃ Rated Voltage 50V AC/DC Storage Humidity Range (Note 3)(Note 4) 40 to 70% Items Specifications Conditions Contact Resistance Signal Contact : 50mΩ Max. Power Contact : 15mΩ Max. Measured at 20mV AC, 1kHz, 1mA Insulation Resistance 50MΩ Min. Measured at 100V DC Withstanding Voltage No flashover or insulation breakdown 150V AC for 1 min. Mating Durability Contact Resistance : Signal Contact : 50mΩ Max. Power Contact : 15mΩ Max. No damage, crack or looseness of parts 30 mating cycles Vibration Resistance No electrical discontinuity of 1µs or more No damage, crack or looseness of parts Frequency: 10 to 55Hz, single amplitude 0.75mm, 10 cycles in each of 3 axis directions for 5 minutes/cycle Shock Resistance No electrical discontinuity of 1µs or more No damage, crack or looseness of parts Acceleration : 490m/s , duration of pulse: 11ms at 3 times for 3 directions. Humidity Resistance Contact Resistance : Signal Contact : 50mΩ Max. Power Contact : 15mΩ Max. Insulation Resistance : 50MΩ Min. No damage, crack or looseness of parts 96 hours at temperature of 40±2℃ and humidity range from 90 to 95% Temperature Cycle Contact Resistance : Signal Contact : 50mΩ Max. Power Contact : 15mΩ Max. Insulation Resistance : 50MΩ Min. No damage, crack or looseness of parts -55℃ for 30min. → +85℃ for 30 min. for 5 Cycles. (Stabilizing Time In Chamber : Within 2 to 3 min.) Sulphur Dioxide Contact Resistance : Signal Contact : 50mΩ Max. Power Contact: 15mΩ Max. No damage, crack or looseness of parts Exposed in 25 PPM for 96h at 25℃, 75±5%RH. (Test standard : JIS C 60068) (Note 1) The total current capacity for the signal contacts is 12A Max. (Note 2) Includes temperature rise caused by current flow. (Note 3) The term “storage” refers to long-term-storage of unused items before they are mounted on the PCB. Operating temperature / humidity range applies to the product in a temporary storage state such as non-powered after mounting on the PCB during transportation, etc. (Note 4) Range identified without condensation. Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Materials / Finish Product Number Structure Part Component Material Finish UL Standard Plug Receptacle Insulator LCP Black UL94V-0 Signal Contact Copper Alloy Gold Plated over Nickel Underplating - Power Contact Copper Alloy Gold Plated over Nickel Underplating - Series Name BK13 Number of Power Contacts 2pos. Stacking Height 0.6mm Contact Pitch 0.35mm Number of Signal Contacts 6, 10, 12, 16, 24, 32, 40, 50, 60pos. Terminal Type V : Straight SMT Connector Type DP : Double-row Plug DS : Double-row Receptacle Packaging (800) : Standard, Embossed tape packaging (20,000pcs per reel) (895) : Embossed tape packaging (1,000pcs per reel) (For trial production)

  • Plug/Receptacle BK13C 06 0.35 (800)- -32 DP 2/ V

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Plug Unit : mm (Note 1) The power contacts of BK13C06-6DP/2-0.35V have an embossed design. (Note 2) This connector has no polarity. Part No. HRS No. No. of Pos. A B C D Purchase UnitSignal Contact Power Contact 1,000pcs per reel Part No. HRS No. No. of Pos. A B C D Purchase UnitSignal Contact Power Contact 20,000pcs per reel

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Plug

  • Recommended Metal Mask Dimensions (Mask Thickness : 0.08mm)
  • Recommended PCB Layout Unit : mm (Note) This connector has no polarity. Part No. No. of Pos. B E F G H ISignal Contact Power Contact

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Receptacle Unit : mm Part No. HRS No. No. of Pos. A B C Purchase UnitSignal Contact Power Contact BK13C06-6DS/2-0.35V(800) (Note 1, 2) CL0480-0799-0-00 6 2 3.30 0.70 1.62 20,000pcs per reel BK13C06-10DS/2-0.35V(800) (Note 2) CL0480-0720-0-00 10 2 4.00 1.40 2.32 BK13C06-12DS/2-0.35V(800) CL0480-0896-0-00 12 2 4.35 1.75 2.67 BK13C06-16DS/2-0.35V(800) CL0480-0722-0-00 16 2 5.05 2.45 3.37 BK13C06-24DS/2-0.35V(800) CL0673-0143-0-00 24 2 6.45 3.85 4.77 BK13C06-32DS/2-0.35V(800) CL0480-0664-0-00 32 2 7.85 5.25 6.17 BK13C06-40DS/2-0.35V(800) CL0480-0666-0-00 40 2 9.25 6.65 7.57 BK13C06-50DS/2-0.35V(800) CL0480-0726-0-00 50 2 11.00 8.40 9.32 BK13C06-60DS/2-0.35V(800) CL0480-0728-0-00 60 2 12.75 10.15 11.07 Part No. HRS No. No. of Pos. A B C Purchase UnitSignal Contact Power Contact BK13C06-6DS/2-0.35V(895) (Note 1, 2) CL0480-0799-0-95 6 2 3.30 0.70 1.62 1,000pcs per reel BK13C06-10DS/2-0.35V(895) (Note 2) CL0480-0720-0-95 10 2 4.00 1.40 2.32 BK13C06-12DS/2-0.35V(895) CL0480-0896-0-95 12 2 4.35 1.75 2.67 BK13C06-16DS/2-0.35V(895) CL0480-0722-0-95 16 2 5.05 2.45 3.37 BK13C06-24DS/2-0.35V(895) CL0673-0145-0-00 24 2 6.45 3.85 4.77 BK13C06-32DS/2-0.35V(895) CL0480-0664-0-95 32 2 7.85 5.25 6.17 BK13C06-40DS/2-0.35V(895) CL0480-0666-0-95 40 2 9.25 6.65 7.57 BK13C06-50DS/2-0.35V(895) CL0480-0726-0-95 50 2 11.00 8.40 9.32 BK13C06-60DS/2-0.35V(895) CL0480-0728-0-95 60 2 12.75 10.15 11.07 (Note 1) The power contacts of BK13C06-6DS/2-0.35V have a dimpled design. (Note 2) BK13C06-6DS/2-0.35V and BK13C06-10DS/2-0.35V have a metal reinforcement in the center of the product. (Note 3) This connector has no polarity.

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A

  • Recommended Metal Mask Dimensions (Mask Thickness : 0.08mm)
  • Recommended PCB Layout Receptacle Unit : mm (Note) This connector has no polarity. Part No. No. of Pos. B D ESignal Contact Power Contact BK13C06-6DS/2-0.35V(8##) 6 2 0.70 3.545 1.42 BK13C06-10DS/2-0.35V(8##) 10 2 1.40 4.245 2.12 BK13C06-12DS/2-0.35V(8##) 12 2 1.75 4.595 2.47 BK13C06-16DS/2-0.35V(8##) 16 2 2.45 5.295 3.17 BK13C06-24DS/2-0.35V(8##) 24 2 3.85 6.695 4.57 BK13C06-32DS/2-0.35V(8##) 32 2 5.25 8.095 5.97 BK13C06-40DS/2-0.35V(8##) 40 2 6.65 9.495 7.37 BK13C06-50DS/2-0.35V(8##) 50 2 8.40 11.245 9.12 BK13C06-60DS/2-0.35V(8##) 60 2 10.15 12.995 10.87

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Packaging Specifications Diagram Unit : mm Part No. HRS No. No. of Pos. A B C D E H ISignal Contact Power Contact Part No. HRS No. No. of Pos. A B C D E H ISignal Contact Power Contact Plug

  • Embossed Tape Dimensions ● Reel Dimensions

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Packaging Specifications Diagram Receptacle

  • Embossed Tape Dimensions ● Reel Dimensions Unit : mm Part No. HRS No. No. of Pos. A B C D E H ISignal Contact Power Contact Part No. HRS No. No. of Pos. A B C D E H ISignal Contact Power Contact

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Usage Precautions 1. Recommended Solder Temperature Profile (Note 1) The temperature is the surface temperature of the PCB in the vicinity of the connector lead part. (Note 2) When using nitrogen reflow process, please mount the product with an oxygen concentration at a minimum of 1,000ppm. Please contact a Hirose representative if the concentration is below 1,000ppm 2. Recommended Manual Soldering Conditions Soldering iron temperature : 340±10℃ Soldering time : within 3 seconds 3. Recommended Metal Mask Thickness and Open Area Ratio to PCB Pattern Area Thickness : 0.08mm Aperture ratio : 100% on the plug side, 100% on the receptacle side 4. PCB Warpage A maximum of 0.02mm at the center of the connector with reference to both ends of the connector. 5. Cleaning Not recommended. If this product is cleaned, please evaluate the performance before using it. Cleaning may cause a change in the mating/unmating properties as well as environmental resistance. 6. Notes ・ Insertion or removal prior to board mounting may result in contact deformation. ・ Avoid supporting the PCB only with the connectors. Support it by other means such as bolts, screws, posts, etc. ・ Avoid excessive prying mating/unmating as it may result in damage. ・ During manual soldering, do not apply flux which will cause solder wicking. ・ This product may have slight color differences due to production lot variability, but this does not have any effect on the performance. ・ Please refer to the next page for mating/unmating precautions. ・ It is advised to secure the mated connectors to the board with housings and cushioning materials because the product can disengage if dropped, by other impact or by FPC routing. ・ Caution! Do not use the connector outside of the specifications.(i.e., rated current, rated voltage, PCB design and operating environment, etc.).Such usage could lead to material outgassing, ignition, or short-circuit, etc. ・ Please use a proper stiffener on the back of the FPC. We recommend using a glass epoxy material with a minimum thickness of 0.3mm or a stainless steel material with a minimum of thickness of 0.2mm. [Conditions] 1. Peak Temperature : Maximum of 250℃ 2. Heated Section : 220℃ Min., within 60 seconds 3. Preheated Section : 150 to 180℃, 90 to 120 seconds 4. Number of Reflow Cycles : Maximum of 2 cycles

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A Connector Handling Precautions 【Connector Mating Precautions】 1. Locate the guides and align the connectors to the appropriate mating position. The connector has guide ribs on the receptacle for proper mating alignment. Align the connectors with the guide ribs. 2. When the connector comes to the appropriate position, the connector will lower into place as indicated by the change in mated height. 3. When the connectors has lowered into place, the connector pair will be parallel to each other and cannot be moved back and forth or left and right. Please complete mating from this state by applying force. 4. Please make sure connectors are mated completely. If one side is floating or the connectors are mated at an angle, please unmate and then redo the mating procedure following the steps described. Receptacle (Please align the connectors) (Please align the connectors) Plug Metal cover guide (Outside) Metal cover guide (Inside)

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A 【Connector Un-Mating Precautions】 1. It is recommended to remove the connector by pulling perpendicular to the connector mounted surface. However, unmating FPC-to-board connectors can become more difficult with higher pin count connectors and thinner FPCs. 2. If is difficult to remove the connector parallel to the mounting surface, remove it diagonally towards the pitch direction. Do not remove the connector towards the width direction as it may put a large amount of stress on the contacts. 3. If the FPC is not rigid enough, there is a possibility of solder peeling or connector damage. Please check the repetitive operation of the FPC planned to be used in advance, such as during the early stage build. Please do not remove the FPC by holding one corner and pulling at a diagonal as this will put a great amount of stress on the contacts.

BK13 Series / 0.35mm Pitch, 0.6mm Stacking Height, 1.9mm Width, Low-Profile Hybrid FPC-to-Board Connector Supporting 5A ※ The contents of this catalog are current as of date of 03/ 2024. Contents are subject to change without notice for the purpose of improvements. ※ The HRS logo and " HIROSE" are trademarks of HIROSE ELECTRIC CO. , L TD. While Taking into Consideration Specifications mentioned in this catalog are reference values. When considering to order or use this product, please review the Drawing and Product Specifications sheets. Use an appropriate cable when using the connector in combination with cables. If considering usage of a non- specified cable, please contact your sales representative. If assembly process is done by jigs & tools which are not identified by Hirose, the warranty of the product may be affected. If considering usage for below mentioned applications, please contact your sales representative. In cases where the application will demand a high level of reliability, such as automotive, medical instruments, public infrastructure, aerospace/ defense etc. Hirose must review before assurance of reliability can be given. 2-6-3,Nakagawa Chuoh, Tsuzuki-Ku, Yokohama-Shi 224-8540,JAPAN https://www.hirose.com/