BFR93ALT1 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

BFR93ALT1MOTOROLA RF DEVICE DATA The RF Line /C0078/C0080/C0078 /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0072/C0105/C0103/C0104/C0045/C0070/C0114/C0101/C0113/C0117/C0101/C0110/C0099/C0121 /C0084/C0114/C0097/C0110/C0115/C0105/C0115/C0116/C0111/C0114/C0115 Designed primarily for use in high–gain, low–noise, small–signal UHF and microwave amplifiers constructed with thick and thin–film circuits using surface mount components.

  • T1 Suffix Indicates Tape and Reel Packaging of 3,000 Units per Reel. MAXIMUM RATINGS Rating Symbol Value Unit Collector–Emitter Voltage VCEO 12 Vdc Collector–Base Voltage VCBO 15 Vdc Emitter–Base Voltage VEBO 2.0 Vdc Collector Current — Continuous IC 35 mAdc Maximum Junction T emperature TJmax 150 °C Power Dissipation, Tcase = 75°C (2) Derate linearly above Tcase = 75°C @ PD(max) 0.306 4.08 W mW/ °C THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Storage Temperature Tstg –55 to +150 °C Thermal Resistance Junction to Case R θJC 245 °C/W DEVICE MARKING BFR93ALT1 = R2 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector–Emitter Breakdown Voltage (1) (IC = 10 mA) V(BR)CEO 12 — Vdc Collector–Base Breakdown Voltage (IC = 10 µA) V(BR)CBO 15 — Vdc Emitter–Base Breakdown Voltage (IC = 100 µA) V(BR)EBO 2.0 — Vdc Collector Cutoff Current (VCE = 10 V) ICEO — 50 nA Collector Cutoff Current (VCB = 10 V) ICBO — 50 nA ON CHARACTERISTICS DC Current Gain (1) (IC = 30 mA, VCE = 5.0 V) hFE 40 — — Collector–Emitter Saturation Voltage (1) (IC = 35 mA, IB = 7.0 mA) VCE(sat) — 0.5 Vdc Base–Emitter Saturation Voltage (1) (IC = 35 mA, IB = 7.0 mA) VBE(sat) — 1.2 Vdc NOTES: 1. Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%. 2.Case temperature measured on collector lead immediately adjacent to body of package. Order this document by BFR93ALT1/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0066/C0070/C0082/C0057/C0051/C0065/C0076/C0084/C0049 RF TRANSISTORS NPN SILICON CASE 318–08, STYLE 6 SOT–23 LOW PROFILE  Motorola, Inc. 1995 REV 7

ELECTRICAL CHARACTERISTICS — continued (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit SMALL–SIGNAL CHARACTERISTICS Current–Gain — Bandwidth Product (IC = 30 mA, VCE = 5.0 V, f = 500 MHz) fT 3.0 — GHz Noise Figure (VCE = 5.0 V, IC = 2.0 mA, RS = 50 Ω , f = 30 MHz) NF — 3.0 dB PACKAGE DIMENSIONS CASE 318–08 ISSUE AE D JK L A C B S H GV 1 2 DIM A MIN MAX MIN MAX MILLIMETERS 0.1102 0.1197 2.80 3.04 INCHES B 0.0472 0.0551 1.20 1.40 C 0.0350 0.0440 0.89 1.11 D 0.0150 0.0200 0.37 0.50 G 0.0701 0.0807 1.78 2.04 H 0.0005 0.0040 0.013 0.100 J 0.0034 0.0070 0.085 0.177 K 0.0140 0.0285 0.35 0.69 L 0.0350 0.0401 0.89 1.02 S 0.0830 0.1039 2.10 2.64 V 0.0177 0.0236 0.45 0.60 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, T oshikatsu Otsuki, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 BFR93ALT1/D /C0042/C0066/C0070/C0082/C0057/C0051/C0065/C0076/C0084/C0049/C0047/C0068/C0042