BFO0003 BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Reflectors, Fibers, Optics BFO D22-XA-DB-EAK-20-01 Order Code: BFO0003 Internet www.balluff.com eCl@ss 9.1: 27-27-36-06 Subject to change without notice: 142734 ETIM 6.0: EC002651 BFO0003_0.3_2021-11-04 Basic features Basic standard IEC 60947-5-2 Reference base unit BFB 75K-001-.. Use for fiber optic base units BFB Version M6, standard Environmental conditions Ambient temperature -40...60 °C Ambient temperature connection area Acc. to fiber optic sensor IP rating IP65 Material Active surface, fiber arrangement Adjacent to one another Fiber type material PMMA Housing material Brass, nickel plated Material jacket PE Surface protection nickel-plated Mechanical data Active surface, fibers Ø 1.0 mm (2x) Cable diameter D 2.20 mm Cable length L 1 m Cable, bending radius min. 25 mm Cable, note can be trimmed Connection type Cable, 1.00 m, PE Dimension Ø 6 x 25 mm Fiber optic cable, structure Single fiber in plastic jacket Length B min., without bending 20.00 mm Mounting part M6 nut Tensile load max. at 20 °C 6 N (max. 3s) Range/Distance Range 140 mm Rated operating distance Sn 140 mm Real switching distance sr 140 mm Remarks The cutting tool is included in the scope of delivery order other accessories separately. Cut cable to length: use suitable cutting tool. Make a single cut, vertical to cable axis. The cut quality can affect the switching distance. Reference object (target): gray card, 200 x 200, 90 % remission, axial approach. Route fiber optic cable so that no excessive tensile, compression or torsional forces are permitted. Observe permissible bending radiuses. Installation may affect the switching distance. Opto Symbols