BFH ITT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Version 05.01.03 Hermetic J-01 Dimensions are shown in mm (inch) Dimensions subject to change www.ittcannon.com Hermetic; MIL-C-5015 BFH/TBFH T he BFH (Bulkhead Fitting) and TBFH (Thru-Bulkhead Fitting) are hermetically sealed versions of the BFR and TBF receptacle connectors. They meet the requirements of MIL-C-5015. The TBFH-100 and TBFH-200 are jam nut mounted with an O-ring for sealing against the bulkhead. TBFH-100 will accommodate a panel thickness of 4,75 (.187) through 7,92 (.312) and a TBFH-200 will accommodate a longer overall length for a panel thickness of 9,52 (.375) through 19,05 (.750) The square flange mounted TBFH-110 mates with 3106 and 3108 plugs. Applications:
- Commercial Aircraft
- Industrial
- Military
- Meets the requirements of MIL-C-5015.
- Solder or laser weld mount.
- Square flange mount.
- Locknut mount.
- Pin or socket contacts are available in selected layouts.
- Resistance to very high pressure differential is achieved using individual glass beads. However, DWV ratings are lower. Performance Specifications Air Leakage Rate ≤1 micron ft /hr max. (1.04 x 10 cm /s) at one atmosphere pressure differential/whwyrrx Connector Durability 100 mating cycles min. Contact Retention 500 psi min., considerably higher with individual glass seals Contact Termination Eyelet; PC Tail; Solder Coupling Threaded DWV Dependent upon contact cavity arrangement Flange Type Circular; Flangeless; Hex; Square Insulation Resistance 5000 MΩ min. at 500 V dc Number of Circuits Up to 75 Operating Temperature –54°C to 150°C (–65°F to 302°F) for standard finishes Service Class Hermetically Sealed Shell Style Bulkhead Thru-Bulkhead, Jam Nut Mounting Thru-Bulkhead, Square Flange Wire Accommodation Up to #0 AWG, dependent upon contact cavity arrangement Electrical Service Data Contact Size 16 12 8 4 0 Current Rating (max.)✧ 10 A 17 A 33 A 60 A 100 A Materials and Finishes Description Material Finish Shell Steel Clear Chromate over Cadmium # Insulator High Grade Plastic — Contact Steel Clear Chromate over Cadmium # O-Ring Nitrile per AN6227 — Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs ✧ This is the maximum current for one single contact. Using MIL-W-5088 and current carried by all contacts within the connector, h eat rise can be predicted. The heat rise must not cause the connector temperature range to be exceeded. # Additional finishes for high temperature and special applications are available. /whwyrrxReceptacles with a maximum air leakage rate of .01 micron cubic foot per hour are also available. Product Features For more information: www.ittcannon.com/cat280