BFCN-1262 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

  • Small size 3.2mm x 1.6mm
  • Pass band (12100-13200 MHz)
  • Very high rejection over wide band
  • Sharp rejection peaks close to stop band Product Overview The BFCN-1262+ LTCC Band Pass Filter achieves a miniature size and high repeatability of performance. Wrap-around terminations minimize variations in performance due to parasitics. Covering 12100-13200 MHz, these units offer excellent rejection over a wide stopband. Feature Advantages Small Size (3.20mm x1.6 mm) Allows for high layout density of circuit boards, while minimizing effects of parasitics. Rejection peaks close to pass band Provides good rejection of signals close to the pass band, for improved system performance. Wide stopband No regrowth at 2nd harmonic permits filter to be used in presence of wideband undesired signals. LTCC construction Provides a rugged package that is well suited for tough environments including high humidity and high temperature extremes. Key Features LTCC Bandpass Filter BFCN-1262+ CASE STYLE: FV1206-9 50Ω 12100 to 13200 MHz

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Ceramic BFCN-1262+ 50Ω 12100 to 13200 MHz Bandpass Filter Maximum Ratings Operating Temperature -55°C to +100°C Storage Temperature -55°C to +100°C RF Power Input* 2W at 25°C *Passband rating, derate linearly to 0.5W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. 0 10000 20000 30000 40000 INSERTION LOSS (dB) FREQUENCY (MHz) BFCN-1262+ INSERTION LOSS 0.0 4.0 8.0 11800 12400 13000 13600 100 1000 0 10000 20000 30000 40000 VSWR (:1) FREQUENCY (MHz) BFCN-1262+ VSWR 11800 12400 13000 13600 Specification Definition Typical Performance Data at 25°C Frequency (MHz) Insertion Loss (dB) VSWR (:1) 1000 65.98 157.93 5000 53.71 133.63 9000 51.86 91.43 10000 47.72 27.59 11200 22.02 9.38 11800 4.84 1.53 12400 4.07 1.77 13000 3.90 1.75 13600 5.50 1.86 14000 17.18 6.28 20000 35.36 59.91 25000 29.53 59.91 32000 18.59 6.97 36000 30.91 3.34 40000 7.75 7.44 Pad Connections Input 1 Output 3 Ground 2 Electrical Specifications(1,2) at 25°C

Applications

  • Harmonic Rejection
  • Transmitters / Receivers

Features

  • Small size
  • Temperature stable
  • Hermetically sealed
  • LTCC construction REV. OR M168340 BFCN-1262+ BK/CP/AM 190128 CASE STYLE: FV1206-9 Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 20, 50, 100, 200, 500,1000, 3000 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications 1. Measured on Mini-Circuits Characterization Test Board TB-1004+ with feedline losses removed by normalization of S12 and S21 traces to measurement of TB thru-line. 2. This filter is not intended for use as a DC Blocking circuit element. In Application where DC voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF port. F4F2F1F3 ATTENUATION (dB) FREQUENCY (MHz) DC F5 Parameter F# Frequency (MHz) Min. Typ. Max. Unit Pass Band Center Frequency — — — 12600 — MHz Insertion Loss F1-F2 12100-13200 — 5 7 dB VSWR F1-F2 12100-13200 — 1.7 — :1 Insertion Loss 12300-13000 — 4 — Stop Band, Lower Insertion Loss DC-F3 DC-9760 30 45 — dB VSWR DC-F3 DC-9760 — 20 — :1 Stop Band, Upper Insertion Loss F4-F5 15170-25000 20 30 — dB Insertion Loss F5-F6 25000-35000 15 20 — dB VSWR F4-F6 15170-35000 — 10 — :1

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Bandpass Filter BFCN-1262+ Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp inch mmOutline Dimensions ( ) Outline Drawing Pad Connections Input 1 Output 3 Ground 2 Demo Board MCL P/N: TB-1004+ Suggested PCB Layout (PL-613) Product Marking: JQ Suggested Layout, Tolerance to be within ±.002 A B C D E F G H J K L M N P Q R S wt