BES00FU BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Order Code: BES00FU Internet www.balluff.com eCl@ss 9.1: 27-27-01-01 Subject to change without notice: 235857 ETIM 6.0: EC002714 BES00FU_0.62_2020-08-04 1) Sensing surface Basic features Approval/Conformity cULus CE EAC WEEE Basic standard IEC 60947-5-2 Display/Operation Function indicator yes Power indicator no Electrical connection Cable diameter D 3.00 mm Cable length L 5 m Conductor cross-section 0.14 mm² Connection type Cable, 5.00 m, PUR Number of conductors 3 Polarity reversal protected yes Protection against device mix-ups yes Short-circuit protection yes Electrical data Load capacitance max. at Ue 1 µF Min. operating current Im 0 mA No-load current Io max., damped 6 mA No-load current Io max., undamped 2 mA Operating voltage Ub 10...30 VDC Output resistance Ra Open drain Rated insulation voltage Ui 75 V DC Rated operating current Ie 100 mA Rated operating voltage Ue DC 24 V Rated short circuit current 100 A Ready delay tv max. 21 ms Residual current Ir max. 10 µA Ripple max. (% of Ue) 10 % Switching frequency 5000 Hz Utilization category DC -13 Voltage drop static max. 2 V Environmental conditions Ambient temperature -25...70 °C Contamination scale 3 EN 60068-2-27, Shock Half-sinus, 30 gn, 11 ms EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min Protection degree IP67 Functional safety MTTF (40 °C) 305 a
Order Code: BES00FU Internet www.balluff.com eCl@ss 9.1: 27-27-01-01 Subject to change without notice: 235857 ETIM 6.0: EC002714 BES00FU_0.62_2020-08-04 Material Housing material Stainless steel Material jacket PUR Material sensing surface PBT Mechanical data Dimension Ø 5 x 27 mm Installation for flush mounting Size M5x0.5 Tightening torque 1 Nm Output/Interface Switching output PNP normally open (NO) Range/Distance Assured operating distance Sa 0.65 mm Hysteresis H max. (% of Sr) 15.0 % Rated operating distance Sn 0.8 mm Real switching distance sr 0.8 mm Repeat accuracy max. (% of Sr) 5.0 % Switching distance marking ■ Temperature drift max. (% of Sr) 10 % Tolerance Sr ±10 % Remarks The sensor is functional again after the overload has been eliminated. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. Wiring Diagrams