BES0005 BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Order Code: BES0005 Internet www.balluff.com eCl@ss 9.1: 27-27-01-01 Subject to change without notice: 152836 ETIM 6.0: EC002714 BES0005_5_2020-03-05 Basic features Approval/Conformity CE cULus EAC WEEE Basic standard IEC 60947-5-2 Trademark Global Display/Operation Function indicator yes Power indicator no Electrical connection Connection M8x1-Male, 3-pin Polarity reversal protected yes Protection against device mix-ups yes Short-circuit protection yes Electrical data Load capacitance max. at Ue 0.5 µF Min. operating current Im 0 mA No-load current Io max., damped 10 mA No-load current Io max., undamped 3 mA Operating voltage Ub 10...30 VDC Output resistance Ra 33.0 kOhm + D Rated insulation voltage Ui 75 V DC Rated operating current Ie 200 mA Rated operating voltage Ue DC 24 V Rated short circuit current 100 A Ready delay tv max. 20 ms Residual current Ir max. 10 µA Ripple max. (% of Ue) 15 % Switching frequency 1500 Hz Utilization category DC -13 Voltage drop static max. 2.5 V Environmental conditions Ambient temperature -25...70 °C, Temperature drift max. (% of Sr) > 15% between 50…70 °C Contamination scale 3 EN 60068-2-27, Shock Half-sinus, 30 gn, 11 ms EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min Protection degree IP67 Functional safety MTTF (40 °C) 830 a
Order Code: BES0005 Internet www.balluff.com eCl@ss 9.1: 27-27-01-01 Subject to change without notice: 152836 ETIM 6.0: EC002714 BES0005_5_2020-03-05 Material Housing material Stainless steel Material sensing surface PA 12 Mechanical data Dimension Ø 6.5 x 30 mm Installation non-flush Size D6.5 Output/Interface Switching output PNP normally open (NO) Range/Distance Assured operating distance Sa 3.2 mm Hysteresis H max. (% of Sr) 15.0 % Rated operating distance Sn 4 mm Real switching distance sr 4 mm Repeat accuracy max. (% of Sr) 5.0 % Switching distance marking ■■ Temperature drift max. (% of Sr) 10 % Tolerance Sr ±10 % Remarks Not for flush mounting: See installation instructions for inductive sensors with extended range 939229. The sensor is functional again after the overload has been eliminated. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. Connector Drawings Wiring Diagrams