BE12-1B79-V STANDEX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Modifications in the sense of technical progress are reserved DESIGNED BY: E.Bunke APPROVED BY: R.Rippl DATE : 2004-03-26 Page 1 of 1 [VRRp-02.doc] REVISION / Rev. No.: 00 REVISED BY: APPROVED BY: DATE : Reed Relay: BE12-1B79-V Headquarter Europe MEDER electronic AG Friedrich-List Strasse 6 D-78234 Engen-Welschingen eMail: info@meder.com Internet: www.meder.com Headquarter USA MEDER electronic Inc.
766 Falmouth Rd
Mashpee, MA 02649 Phone: +1/ 508-539-0002 Fax: +1/ 508-539-4088 eMail: salesusa@meder.com Part Number: 8812179500 Dimensions (mm) Layout / Pitch 2,54 mm / Top View Marking MEDER-Label Type Layout Production- Code- EN60062 /Factory Code Pins: ∅ 0,65 mm / L 3,2 ± 0,3 mm Coil/Relay Characteristics Conditions at 20°C Min. Typ. Max. Units Coil Resistance 990 1100 1210 Ω Nominal Voltage 12 VDC Nominal Rated Power 131 mW Thermal Resistance 61 K / W Operate Voltage 8,4 VDC Release Voltage 1,0 VDC Contact Data 79 (Form A/Dry) Contact Rating Any combination of the switching voltage and current must not exceed the given rated power 25 W Switching Voltage DC or Peak AC 1000 V Switching Current DC or Peak AC 1,0 A Carry Current DC or Peak AC 2,0 A Static Contact Resistance (initial) Measured with Nominal Voltage 150 mΩ Insulation Resistance RH 45% 1011 Ω Breakdown Voltage 2000 VDC Operate Time including Bounce Measured with Nominal Voltage 0,8 ms Release Time Measured with no coil suppression 0,4 ms Capacitance 0,4 pF Environmental Data Insulation Resistance Coil to Contact RH 45% 1012 Ω Dielectric Strength Coil to Contact 4,5 kV AC Shock ½ sine wave, duration 11ms 50 g Vibration from 10 - 2000 Hz 20 g Operating Temperature 10°C/min max. allowable -20 70 °C Storage Temperature 10°C/min max. allowable -40 105 °C Soldering Temperature 5 sec. at 260 °C Cleaning fully sealed Material of Case Plastics / Polycarbonat Sealing Compound Polyurethan Material of Pins Cu-alloy tinned Remarks Coil polarity must be observed. Dielectric Strength Coil to Contact ≥4,5 kV AC. Customer / Customer part number Standard Part