BDX54 TRSYS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

TRANGYS BDX54, BDX54A, BDX54B, BDX54C PNP SILICON POWER DARLINGTONS LiMiTED TO-220 PACKAGE @ Designed for Complementary Use with (TOP VIEW) BDX53, BDX53A, BDX53B and BDX53C -— @ 60 Wat 25°C Case Temperature 8 1 @ 8 AContinuous Collector Current & @ Minimum hg of 750 at 3 V, 3A a Pin 2 is in electrical contact with the mounting base. absolute maximum ratings at 25°C case temperature (unless otherwise noted) RATING SYMBOL VALUE UNIT BDX54 45 BDX54A -60 lector- = Collector-base voltage (Ie = 0) BDX54B Veso -80 Vv BDX54C -100 BDX54 ~45 i _ BDX54A -60 Collector-emitter voltage (Ig = 0) BDxs48 Voeo “80 v BDX54C -100 Enitarbase volage Continuous collector current [| 8 |_A_| Continuous device dissipation at (or below) 25°C case temperature (see Note 1) a Continuous device dissipation at (or below) 25°C free air temperature (see Note 2) Operating junction temperature range “65104150 Operating temperature range 6510 +150 Operating free-air temperature range 6510150 NOTES: 1. Derate linearly to 150°C case temperature at the rate of 0.48 W/C. 2. Derate linearly to 150°C free air temperature at the rate of 16 mW/C.

BDX54, BDX54A, BDX54B, BDX54C electrical characteristics at 25°C case temperature (unless otherwise noted) PARAMETER TEST CONDITIONS [| min | Typ | MAX] UNIT | BDX54 ~45 Collector-emitter BDX54A -60 ViBR)CEO breakdown voltage Ic= -100mA — Ip=0 (see Note 3) BDX54B -80 v BDX54C -100 Voe= -30V Ig=0 BDX54 “05 \\ Collector-emitter Voe= -30V Ig=0 BDX54A 05/1, CEO cut-off current Voe= -40V Ig=0 BDX54B -0.5 Vce= -50V = Ig=0 BDX54C -0.5 Vop= -45V lp =0 BDX54 -0.2 | Collector cut-off Vop= -60V Ie=0 BDX54A 02) oy CBO current Vep= -80V Ip =0 BDX54B 0.2 Vop=-100V Ie =0 BDX54C -0.2 Emitter cut-off I Vep= -5V Io=0 2 A Forward current oe = 8 'c =8A (see Notes 9 and) f=] | | Base-emitter Collector-emitter Parallel diode Vv le = “3A Ig=0 -2.5 Vv NOTES: 3. These parameters must be measured using pulse techniques, t, = 300 us, duty cycle < 2%. 4. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics PARAMETER | min | TYP | Max] UNIT [Ric Junctontocasethemalressiance SSCS 8 | [Fun duncton otreearthemalrestanes—SSSSSCSC~SS*dYSCC* es | resistive-load-switching characteristics at 25°C case temperature PARAMETER TEST CONDITIONS Tf | min | typ | max] UNIT ie=3A ee a a a tor _Turn-off time Vee (ot) =4.2V RL=100 tp=20us,desa% [| 5 | | | T Voltage and current values shown are nominal; exact values vary slightly with transistor parameters.

9 PL TNX NT 8 as

Figure 1. Figure 2.

BDX54, BDX54A, BDX54B, BDX54C PNP SILICON POWER DARLINGTONS Ca MECHANICAL DATA TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. 70220 4,70 4,20 3,96 10,4 1,32 O37 10,0 2,95 1,23 ‘ 2,54 see NoteB 4 4 V \\ OG é fl 6,0 = J 15,90 H 14,55 see Note C 61 3,5 14,1 1,70 12,7 0,97 | 1,07 0,61 i DOO 2,34 0,41 5,28 2,90 4,88 2,40 VERSION 1 VERSION 2 ALL LINEAR DIMENSIONS IN MILLIMETERS, NOTES: A. The centre pin is in electrical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version Version 1, 18.0 mm. Version 2, 17.6 mm.