BDS3-3C96-A50 FERROXCUBE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

2004 Nov 01 2

Soft Ferrites Gapped SMD beads GAPPED SMD BEADS FOR POWER INDUCTORS General data Grades, parameters and type numbers Note 1. I max is the saturation rated current. 2. DC resistance <0.6 mΩ. 3. DC resistance <1.0 mΩ Mechanical data ITEM SPECIFICATION Strip material copper (Cu), tin (Sn) plated Solderability “IEC 60068-2-58”, Par t 2, Tes t Ta, method 1 Taping method “IEC 60286-3” , “EIA 481-1” and “EIA 481-2” GRADE L at

1 MHz

(nH) Imax(1) (A) TYPE NUMBER BDS 3/3/4.6; mass ≈ 0.15 g (2) 3C96 50 ± 20 % 20 BDS3/3/4.6-3C96-A50 75 ± 20 % 15 BDS3/3/4.6-3C96-A75 BDS 4.6/3/8.9; mass ≈ 0.5 g (3) 3C96 100 ± 20% 20 BDS4.6/3/8.9-3C96-A100 150 ± 20% 20 BDS4.6/3/8.9-3C96-A150 0.2 ± 0.015 1.27 ± 0.07 3.05 ± 0.15 max 1.2 min1.1 min 4.6 ± 0.3 MGC296 Fig.1 BDS 3/3/4.6. Dimensions in mm. 0.2 ± 0.015 4.6 ± 0.3 1.27 ± 0.07 max 5 min 1.2 min 8.9 ± 0.35 MGC298 Fig.2 BDS 4.6/3/8.9. Dimensions in mm.

2004 Nov 01 3

Soft Ferrites Gapped SMD beads RECOMMENDED DIMENSIONS OF SOLDER LANDS Table 1 Reflow soldering SIZE DIMENSIONS (mm) ABCD Fig.3 Reflow and vapour phase soldering. For dimensions see Table 1. Dimensions of solder lands are based on a solder paste layer thickness of approximately 200 µm (≈0.7 mg solder paste per mm 2). MEA734 /; /; AC B C D Table 2 Wave soldering SIZE DIMENSIONS (mm) ABCDE MEA735 AC B C D /; /; E Fig.4 Wave soldering. For dimensions see Table 2.

2004 Nov 01 4

Soft Ferrites Gapped SMD beads Soldering profiles Fig.5 Reflow soldering. Typical values (solid line). Process limits (dotted lines). 0 50 100 150 200 250 300 250 200 150 100 10 s 260 °C 130 °C (°C) t (s) MLA859 245 °C 215 °C 180 °C 10 s 40 s

2 K/s

T Fig.6 Double wave soldering. Typical values (solid line). Process limits (dotted lines). 0 50 100 150 200 250 300 250 200 150 100 10 s 235 °C to 260 °C second wave

5 K/s

200 K/s

100 °C to 130 °C forced cooling (°C) t (s) T MLA861

2004 Nov 01 5

Soft Ferrites Gapped SMD beads BLISTER TAPE AND REEL DIMENSIONS Table 3 Physical dimensions of blister tape; see Fig.7 SIZE DIMENSIONS (mm) BDS3/3/4.6 BDS4.6/3/8.9 D1 ≥1.5 ≥1.5 Fig.7 Blister tape. For dimensions see Table 3. handbook, full pagewidth MEA613 - 1 E F W P2D0 A0 D 1 direction of unreeling K T cover tape

2004 Nov 01 6

Soft Ferrites Gapped SMD beads Table 4 Reel dimensions; see Fig.8 SIZE DIMENSIONS (mm) AN W 1 W2 12 330 100 ±5 12.4 ≤16.4 16 330 100 ±5 16.4 ≤20.4 handbook, full pagewidth 12.75 0.15 020.5 NA W 1 MSA284 Fig.8 Reel. Dimensions in mm. For dimensions see Table 4.

2004 Nov 01 7

Soft Ferrites Gapped SMD beads DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.