BDS18 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourage s customers to verify that datasheets are current before placing orders. Semelab Limited Semelab Limited Semelab Limited Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4 JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 5526 12 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8667 Issue 1 Page 1 of 3 BDS18

  • High Voltage
  • Hermetic TO220 Isolated Metal Package
  • Ideally suited for Power Linear, Switching and general Purpose Applications
  • Screening Options Available ABSOLUTE MAXIMUM RATINGS (T C = 25°C unless otherwise stated) VCBO Collector – Base Voltage -120V VCEO Collector – Emitter Voltage -120V VEBO Emitter – Base Voltage -5V IC Continuous Collector Current -8A IB Base Current -2A PD Total Power Dissipation at TC ≤ 75°C 50W Derate Above 75°C 0.4W/°C TJ Junction Temperature Range -65 to +200°C Tstg Storage Temperature Range -65 to +200°C THERMAL PROPERTIES Symbols Parameters Max. Units Rθ JC Thermal Resistance, Junction To Case 2.5 °C/W ** This datasheet supersedes document 3346

Semelab Limited Semelab Limited Semelab Limited Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4 JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 5526 12 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8667 Issue 1 Page 2 of 3 ELECTRICAL CHARACTERISTICS (T C = 25°C unless otherwise stated) Symbols Parameters Test Conditions Min. Typ Max. Units V(BR)CEO (1) Collector-Emitter Breakdown Voltage IC = -10mA I B = 0 -120 V ICEO Collector Cut-Off Current VCE = -60V I B = 0 -0.1 mA ICBO Collector Cut-Off Current VCB = -120V I E = 0 -20 IEBO Emitter Cut-Off Current VEB = -5V I C = 0 -10 µA IC = -0.5A V CE = -2V 40 250 hFE (1) Forward-current transfer ratio IC = -4A V CE = -2V 15 150 IC = -0.5A I B = -0.05A -0.4 VCE(sat) (1) Collector-Emitter Saturation Voltage IC = -4A I B = -0.4A -1.5 VBE(on) (1) Base-Emitter Voltage IC = -1.0A V CE = -2V -1.4 V DYNAMIC CHARACTERISTICS IC = -0.5A V CE = -4V fT Transition Frequency f = 5MHz

10 MHz

IC = -2A V CC = -80V ton Turn-On Time IB1 = -0.2A 0.5 ts Storage Time IC = -2A V CC = -80V 1.5 tf Fall Time IB1 = - I B2 = -0.2A 0.3 µs Notes Notes Notes Notes (1) Pulse Width ≤ 300us, δ ≤ 2%

Semelab Limited Semelab Limited Semelab Limited Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4 JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 5526 12 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8667 Issue 1 Page 3 of 3 MECHANICAL DATA Dimensions in mm (inches) 0.64 (0.025) 0.89 (0.035) 10.92 (0.430) 10.41 (0.410) 4.83 (0.190) 5.33 (0.210) 10.41 (0.410) 10.92 (0.430) 0.89 (0.035) 1.27 (0.050) 3.05 (0.120) BSC 2.54 (0.100) BSC 12.70 (0.500) 14.73 (0.750) Dia. 1 2 3 13.21 (0.52) 13.72 (0.54) 13.21 (0.52) 13.72 (0.54) 3.56 (0.140) 3.81 (0.150) Dia TO220M (TO -257AB ) Pin 1 - Base Pin 2 - Collector Pin 3 - Emitter