BD648

BD646 TRSYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

TRANSYS BD646, BD648, BD650, BD652 ELECTRONICS PNP SILICON POWER DARLINGTONS LiMiTED A . TO-220 PACKAGE @ Designed for Complementary Use with (TOP VIEW) BD645, BD647, BD649 and BD651 @ 62.5 W at 25°C Case Temperature B a 1 @ 8 AContinuous Collector Current a @ Minimum hr¢ of 750 at 3 V, 3 A E 8 Pin 2 is in electrical contact with the mounting base. absolute maximum ratings at 25°C case temperature (unless otherwise noted) RATING SYMBOL VALUE UNIT BD646 “80 BD648 -100 llector- = Collector-base voltage (Ie = 0) BD650 Veso “120 Vv BD652 -140 BD646 -60 i _ BD648 -80 Collector-emitter voltage (Ip = 0) BD8s0 Veeco “400 Vv BD652 -120 ETDS VOTEBE Continuous collector current [| 8 |_A_| Peak collector current (see Note 7) Continuous device dissipation at (or below) 25°C case temperature (see Note 2) Continuous device dissipation at (or below) 25°C free air temperature (see Note 3) Unclamped inductive Toad energy (see Note 4) Operating junction temperature range “6510150 ‘Storage temperature range -65 to +150 Lead temperature 3.2 mm from case for 10 seconds NOTES: 1. This value applies for ty < 0.3 ms, duty cycle < 10%. 2. Derate linearly to 150°C case temperature at the rate of 0.4 W/'C. 3. Derate linearly to 150°C free air temperature at the rate of 16 mW/'C. 4. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 MH, Ion) = -5 MA, Rag = 100 2, Vee (ott) = 0, Rg = 0.1 2, Voc = -20 V.

BD646, BD648, BD650, BD652 electrical characteristics at 25°C case temperature (unless otherwise noted) PARAMETER TEST CONDITIONS | min | TYP | MAX] UNIT BD646 ~60 Collector-emitter BD648 -80 Vv Io= -30mMA — Ig=0 (see Note 5) v (8R)CEO breakdown voltage c m 8 ( ) BD650 -100 BD652 -120 Voe= -30V Ig=0 BD646 “05 \\ Collector-emitter Voe= -40V Ig=0 BD648 05| 1, CEO cut-off current Voe= -50V Ip=0 BD650 -0.5 Vce= -60V = Ig=0 BD652 -0.5 Vep= -60V. [e=0 BD646 -0.2 Vop= -80V Ie=0 BD648 -0.2 Vop=-100V Ie =0 BD650 -0.2 Collector cut-off Vop =-120 V le=0 BD652 -0.2 ‘oo . mA current Vep= -40V le=0 To = 150°C BD646 -2.0 Vop= -50V le=0 To= 150°C BD648 -2.0 Vep= -60V le=0 To= 150°C BD650 -2.0 Vop= -70V le=0 To= 150°C BD652 -2.0 Emitter cut-off \\ Vep= -5V Ic =0 Notes 5 and 6) 5 A Forward current oe = 8 'c = 8A (see Notes S and 6) f=] | | Collector-emitt Ip= -12mA_ Ic= -3A -2 Voeicay 2 ocroremiter 8 mole (see Notes 5 and 6) v saturation voltage Ip= -50MA_Ic= -5A 25 Base-emitter Base-emitter NOTES: 5. These parameters must be measured using pulse techniques, t, = 300 ps, duty cycle < 2%. 6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics | Fasc Junotontecasethermalrestanos—— SSS 2 [Ran duncton tee arhermal resend SSSSSCS~*dY i

BD646, BD648, BD650, BD652 PNP SILICON POWER DARLINGTONS —_SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS, SAFE OPERATING AREA 0S ae Fa a a a a | | So LUE ENT [TTT BERR REA [o} a 5 a A

8 Po PENT

[TT epese Sr | LTT apes SS ft oor Ecosse “1.0 10 -100 -1000 Vg - Collector-Emitter Voltage - V Figure 4. THERMAL INFORMATION MAXIMUM POWER DISSIPATION vs CASE TEMPERATURE oT oe eee 5 sof— Pol IN | | 3 50 a et ON NF 5 0 \\ a pt | | KN : 20 eo NN LN [0 25 50 75 100 125 150 T,- Case Temperature - °C Figure 5.

BD646, BD648, BD650, BD652 PNP SILICON POWER DARLINGTONS Ca MECHANICAL DATA TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. 70220 4,70 4,20 3,96 10,4 1,32 O37 10,0 2,95 1,23 ‘ 2,54 see NoteB 4 4 V \\ OG é fl 6,0 = J 15,90 H 14,55 see Note C 61 3,5 14,1 1,70 12,7 0,97 | 1,07 0,61 i DOO 2,34 0,41 5,28 2,90 4,88 2,40 VERSION 1 VERSION 2 ALL LINEAR DIMENSIONS IN MILLIMETERS, NOTES: A. The centre pin is in electrical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version Version 1, 18.0 mm. Version 2, 17.6 mm.