BD646 BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

BD646, BD648, BD650, BD652 PNP SILICON POWER DARLINGTONS /g80 /g82/g79 /g68 /g85/g67/g84 /g73/g78/g70/g79/g82/g77/g65 /g84/g73/g79/g78 1MAY 1993 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice.

  • Designed for Complementary Use with BD645, BD647, BD649 and BD651
  • 62.5 W at 25°C Case Temperature
  • 8 A Continuous Collector Current
  • Minimum hFE of 750 at 3 V, 3 A absolute maximum ratings at 25°C case temperature (unless otherwise noted) NOTES: 1. This value applies for t p ≤ 0.3 ms, duty cycle ≤ 10%. 2. Derate linearly to 150°C case temperature at the rate of 0.4 W/°C. 3. Derate linearly to 150°C free air temperature at the rate of 16 mW/°C. 4. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 mH, I B(on) = -5 mA, RBE = 100 Ω, VBE(off) = 0, RS = 0.1 Ω, VCC = -20 V. RATING SYMBOL VALUE UNIT Collector-base voltage (IE = 0) BD646 BD648 BD650 BD652 V CBO -80 -100 -120 -140 V Collector-emitter voltage (I B = 0) BD646 BD648 BD650 BD652 V CEO -60 -80 -100 -120 V Emitter-base voltage V EBO -5 V Continuous collector current IC -8 A Peak collector current (see Note 1) I CM -12 A Continuous base current IB -0.3 A Continuous device dissipation at (or below) 25°C case temperature (see Note 2) P tot 62.5 W Continuous device dissipation at (or below) 25°C free air temperature (see Note 3) P tot 2W Unclamped inductive load energy (see Note 4) ½LI C 2 50 mJ Operating junction temperature range T j -65 to +150 °C Storage temperature range Tstg -65 to +150 °C Lead temperature 3.2 mm from case for 10 seconds T L 260 °C B C E TO-220 PACKAGE (TOP VIEW) Pin 2 is in electrical contact with the mounting base. MDTRACA

BD646, BD648, BD650, BD652 PNP SILICON POWER DARLINGTONS /g80/g82/g79/g68/g85 /g67/g84 /g73/g78/g70/g79/g82/g77/g65 /g84/g73/g79/g78 MAY 1993 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOTES: 5. These parameters must be measured using pulse techniques, t p = 300 µs, duty cycle ≤ 2%. 6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying conta cts. electrical characteristics at 25°C case temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT V(BR)CEO Collector-emitter breakdown voltage IC = -30 mA I B = 0 (see Note 5) BD646 BD648 BD650 BD652 -60 -80 -100 -120 V I CEO Collector-emitter cut-off current VCE = - 3 0 V VCE = - 4 0 V VCE = - 5 0 V VCE = - 6 0 V IB =0 IB =0 IB =0 IB =0 BD646 BD648 BD650 BD652 -0.5 -0.5 -0.5 -0.5 mA I CBO Collector cut-off current VCB = - 6 0 V VCB = -80 V VCB = -100 V VCB = -120 V VCB = - 4 0 V VCB = -50 V VCB = -60 V VCB = -70 V IE =0 IE =0 IE =0 IE =0 IE =0 IE =0 IE =0 IE =0 TC = 150°C TC = 150°C TC = 150°C TC = 150°C BD646 BD648 BD650 BD652 BD646 BD648 BD650 BD652 -0.2 -0.2 -0.2 -0.2 -2.0 -2.0 -2.0 -2.0 mA I EBO Emitter cut-off current VEB = -5 V I C = 0 (see Notes 5 and 6) -5 mA hFE Forward current transfer ratio VCE = -3 V I C = -3 A (see Notes 5 and 6) 750 VCE(sat) Collector-emitter saturation voltage IB = -12 mA IB = -50 mA IC = - 3A IC = - 5A (see Notes 5 and 6) -2 -2.5 V VBE(sat) Base-emitter saturation voltage IB = -50 mA I C = -5 A (see Notes 5 and 6) -3 V VBE(on) Base-emitter voltage VCE = -3 V I C = -3 A (see Notes 5 and 6) -2.5 V thermal characteristics PARAMETER MIN TYP MAX UNIT RθJC Junction to case thermal resistance 2.0 °C/W RθJA Junction to free air thermal resistance 62.5 °C/W

BD646, BD648, BD650, BD652 PNP SILICON POWER DARLINGTONS /g80 /g82/g79 /g68 /g85/g67/g84 /g73/g78/g70/g79/g82/g77/g65 /g84/g73/g79/g78 MAY 1993 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound w ill withstand soldering temperature with no defor mation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. MECHANICAL DATA TO220 ALL LINEAR DIMENSIONS IN MILLIMETERS ø 1,23 1,32 4,20 4,70 123 0,97 0,61 see Note C see Note B 10,0 10,4 2,54 2,95 6,0 6,6 14,55 15,90 12,7 14,1 3,5 6,1 1,07 1,70 2,34 2,74 4,88 5,28 3,71 3,96 0,41 0,64 2,40 2,90 VERSION 2 VERSION 1 NOTES: A. The centre pin is in electr ical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version. Version 1, 18.0 mm. Version 2, 17.6 mm. MDXXBE