BD0810J50100A00 ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432h8909 (800) 411h6596 +44 2392h232392 Model BD0810J50100A00 Rev C Ultra Low Profile 0805 Balun 50Ω to 100Ω Balanced

Description

The BD0810J50100A00 is a low profile subhminiature balanced to unbalanced transformer designed for differential inputs and ou tput locations on next generation wireless chipsets in an easy to use surface mount p ackage covering the GSM frequency. The BD0810J50100A00 is ideal for high vo lume manufacturing and is higher performance than traditional ceramic and lum ped element baluns. The BD0810J50100A00 has an unbalanced port impedance of 50 Ω and a 100 Ω balanced port impedance. This transformation enable s single ended signals to be applied to differential ports on modern semiconduct ors. The output ports have equal amplitude (h3dB) with 180 degree phase differential . The BD0810J50100A00 is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25 °° °°C) Parameter Min. Typ. Max Unit Frequency 800 1000 MHz Unbalanced Port Impedance 50 Ω Balanced Port Impedance 100 Ω Return Loss 13 15 dB Insertion Loss* 0.70 0.95 dB Amplitude Balance 0.2 0.4 dB Phase Balance 1 2 Degrees CMRR 39 dB Power Handling 2 Watts Features:

  • 800 – 1000 MHz
  • 0.7mm Height Profile
  • 50 Ohm to 2 x 50 Ohm
  • GSM
  • Low Insertion Loss
  • Input to Output DC Isolation
  • Surface Mountable
  • Tape & Reel
  • Non–conductive Surface
  • RoHS Compliant Operating Temperature h55 +85 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Mechanical Outline Dimensions are in Inches [Millimeters] Tolerances are NonhCumulative .049 ±.004 [1.25 ±0.10 ] .079 ±.004 [2.00 ±0.10 ] 1 2 3 6 5 4 Bottom View (Farhside) Side View Top View (Nearhside) .027 ±.002 [0.70 ±0.05 ] 6X .012 [0.30] + RF GND Pin Designation Unbalanced Port GND / DC Feed Balanced Port Balanced Port GND NC Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location .026 [0.65] 6X .009 [0.22] .039 [0.98]

USA/Canada: Toll Free: Europe: (315) 432h8909 (800) 411h6596 +44 2392h232392 Available on Tape and Reel for Pick and Place Manufacturing. Model BD0810J50100A00 Rev. C Typical Broadband Performance: 0 GHz. to 8.5 GHz. Return Loss – Input h36 h33 h30 h27 h24 h21 h18 h15 h12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 Frequency [MHz] [dB] Amplitude Balance h1.5 h0.5 0.5 1.5 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 Frequency [MHz] [dB] Insertion Loss h30 h25 h20 h15 h10 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 Frequency [MHz] [dB] Phase Balance h20 h15 h10 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 Frequency [MHz] deg CMRR h50 h45 h40 h35 h30 h25 h20 h15 h10 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 Frequency [MHz] [dB]

Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432h8909 (800) 411h6596 +44 2392h232392 Model BD0810J50100A00 Rev C Typical Performance: 700 MHz. to 1100 MHz. Return Loss – Input h36 h33 h30 h27 h24 h21 h18 h15 h12 700 800 900 1000 1100 Frequency [MHz] [dB] Amplitude Balance h1.5 h0.5 0.5 1.5 700 800 900 1000 1100 Frequency [MHz] [dB] Insertion Loss h3.6 h3.3 h2.7 h2.4 h2.1 h1.8 h1.5 h1.2 h0.9 h0.6 h0.3 700 800 900 1000 1100 Frequency [MHz] [dB] Phase Balance h20 h15 h10 700 800 900 1000 1100 Frequency [MHz] deg CMRR h50 h45 h40 h35 h30 h25 h20 h15 h10 700 800 900 1000 1100 Frequency [MHz] [dB]

USA/Canada: Toll Free: Europe: (315) 432h8909 (800) 411h6596 +44 2392h232392 Available on Tape and Reel for Pick and Place Manufacturing. Model BD0810J50100A00 Rev. C Mounting Configuration: In order for Xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VS WR may not meet published specifications. All of the Xinger components are constructed from c eramic filled PTFE composites which possess excelle nt electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ oC. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC hbiased footprint is also shown below. In specific designs , the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. No Bias Footprint

0805 Standard Mounting Footprint

Dimensions are in Inches [Millimeters] .029 [0.73] 6X .002 [0.05] 6X .011 [0.27] 4X .012 [0.30] Plated thru hole to ground 3X Transmission Line Circuit Pattern Footprint Pad (s) Solder Resist 6X .014 [0.35] Part Orientation (Top View) DC Bias Footprint DC Bias .026 [0.66] 4X .012 [0.30] 6X .013 [0.33] 6X .016 [0.35] Part Orientation (Top View)

0805 DC Bias Mounting Footprint

Dimensions are in Inches [Millimeters] 6X .002 [0.05] Plated thru hole to ground 3X Transmission Line Circuit Pattern Footprint Pad (s) Solder Resist

Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432h8909 (800) 411h6596 +44 2392h232392 Model BD0810J50100A00 Rev C Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481h2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information . B ØA ØC REEL DIMENSIONS (inches [mm]) ØA B ØC 0.32 [8.0] 2.0 [50.8] 7.00 [177.8] 4000 QUANTITY/REEL TABLE 1 ØD 0.512 [13.0] ØD

USA/Canada: Toll Free: Europe: (315) 432h8909 (800) 411h6596 +44 2392h232392 Available on Tape and Reel for Pick and Place Manufacturing. Model BD0810J50100A00 Rev. C