BD CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Extended actuator for easy actuation Open bottom construction allows for solder washing without the need for tape seal Address switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications Open Base (Suitable for most cleaning methods) BD08 PC MOUNTING SPST Standard Profile DIP Switches BD Series DIP D D-12 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 How To Order Complete part numbers for BD Series standard profile DIP Switches are shown on pages D-12 thru D-14. All switches supplied in ‘OFF’ position and in rigid dispensing tubes. Closed base models suitable for no-wash or bottom wash cleaning methods only. Specifications SWITCH FUNCTION: SPST-1 thru 12 position available (except 11 position). CONTACT RATING: Carry: 100 mA max. @ 50 V DC. Switch: 100 mA max. @ 5 V DC or 25 mA max. @ 25 V DC. MECHANICAL & ELECTRICAL LIFE: 10,000 make-and-break cycles at full load, each circuit. CONTACT RESISTANCE: Below 50 milliohms typ. initial @ 2–4 V DC, 100 mA. INSULATION RESISTANCE: 10 9 ohms min. DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between adjacent terminals. CAPACITANCE: 5 pF max. between adjacent terminals. STORAGE & OPERATING TEMPERATURE: -40 C to 85C. SHOCK: Withstands 20g 11 ms sawtooth waveform with no contact opening greater than 10 microseconds. VIBRATION: No contact opening greater than 10 microseconds and no contact closure when exposed to vibration .06 in DA or 5g, whichever is less, from 10 to 55 Hz, and 10g from 55 to 500 Hz. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). PACKAGING: Switches supplied in rigid dispensing tubes in full-tube quantities only: this may affect order quantity. Number of switches per tube varies with model, consult Customer Service Center. Switch position 1 denotes pin number 1. All switch actuators in ‘OFF’ position, standard. Materials CASE & COVER: Glass filled polyester (PBT), flame retardant (UL 94V-0). ACTUATOR: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0). CONTACTS: WE#1 over palladium silver over nickel over phosphor bronze. TERMINALS: Phosphor bronze, with tin-lead alloy over nickel plate. TERMINAL SEAL: Epoxy. NOTE : Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. PART NUMBER NO. POS. DIM. ‘A’ QUANTITY PER TUBE BD01 1 .180 (4,57) 115 BD02 2 .280 (7,11) 74 BD03 3 .380 (9,65) 54 BD04 4 .480 (12,19) 43 BD05 5 .580 (14,73) 35 BD06 6 .680 (17,27) 30 BD07 7 .780 (19,81) 26 BD08 8 .880 (22,35) 23 BD09 9 .980 (24,89) 21 BD10 10 1.080 (27,43) 19 BD12 12 1.280 (32,51) 16 Schematic SPST Rev. A 8/99

Open Base & AV Right Angle Terminal Style BD08AV PC MOUNTING Closed Base & Epoxy Terminal Seal BD08E (Suitable For Bottom Wash Cleaning Methods Only) EPOXY PC MOUNTING SPST SPST NOTE : Boxed dimensions show difference between AV & AV2 terminal styles. Standard Profile DIP Switches BD Series DIP D D-13 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 PART NUMBER NO. POS. DIM. ‘A’ QUANTITY PER TUBE BD02E 2 .280 (7,11) 74 BD04E 4 .480 (12,19) 43 BD05E 5 .580 (14,73) 35 BD06E 6 .680 (17,27) 30 BD08E 8 .880 (22,35) 23 BD10E 10 1.080 (27,43) 19 BD12E 12 1.280 (32,51) 16 Schematic SPST PART NUMBER NO. POS. DIM. ‘A’ QUANTITY PER TUBE BD02AV 2 .280 (7,11) 72 BD03AV 3 .380 (9,65) 52 BD04AV 4 .480 (12,19) 42 BD05AV 5 .580 (14,73) 35 BD06AV 6 .680 (17,27) 29 BD07AV 7 .780 (19,81) 26 BD08AV 8 .880 (22,35) 23 BD09AV 9 .980 (24,89) 20 BD10AV 10 1.080 (27,43) 18 BD12AV 12 1.280 (32,51) 15 Schematic SPST Rev. A 8/99

Open Base & AV2 Right Angle Terminal Style BD08AV2 PC MOUNTING SPST NOTE : Boxed dimensions show difference between AV & AV2 terminal styles. Standard Profile DIP Switches BD Series DIP D D-14 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 PART NUMBER NO. POS. DIM. ‘A’ QUANTITY PER TUBE BD02AV2 2 .280 (7,11) 72 BD03AV2 3 .380 (9,65) 52 BD04AV2 4 .480 (12,19) 42 BD05AV2 5 .580 (14,73) 35 BD06AV2 6 .680 (17,27) 29 BD07AV2 7 .780 (19,81) 26 BD08AV2 8 .880 (22,35) 23 BD09AV2 9 .980 (24,89) 20 BD10AV2 10 1.080 (27,43) 18 BD12AV2 12 1.280 (32,51) 15 Schematic SPST Installation, Soldering and Cleaning All BD Series Standard Profile DIP Switches can be hand soldered or machine soldered without the use of boots, caps, tapes or special attention. Open base washable models have unique design, allowing solvent cleaners and water/detergent solutions to flush and clean the electrical contacts of contaminants and fluxes. Closed base models with epoxy terminal sealing recommended for no-wash or bottom-wash assembly methods only. For best results, follow these recommendations: 1) Wave soldering recommended at 500 F solder temperature. 2) Hand solder using 30 watt small tip iron controlled at 500 F, 10 seconds max./terminal. 3) Open base washable models: Clean flux using forced rinse, high agitation or triple bath cleaning method. DO NOT mask or cover switch in any way during cleaning. Switch is designed for easy solvent flush out. 4) Closed base models with epoxy terminal seal: Recommended for no-wash or bottom-wash assembly methods only. 5) All switch actuators must be in ‘OFF’ position during soldering and cleaning processes. Rev. A 8/99