BD0205F5050A00 ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432h8909 (800) 411h6596 +44 2392h232392 Model BD0205 F50 50 A00 Rev A Ultra Low Profile 1608 Balun 50Ω to 50Ω Balanced

Description

The BD0205F5050A00 is a low profile subhm iniature balanced to unbalanced transformer designed for differential input locations on data conversion devices such as A to D and D to A converters. In an easy to use surface mount package covering

200 MHz to 500 MHz and with CMRR performances over 2x that of the incumbent

wire wound products, this transformer is optimized to offer improved SFDR management during operation of the data converter d evice. The BD0205F5050A00 is ideal for high volume manufacturing and is highe r performance and smaller form factor than traditional wire wound transformers. Th e BD0205F5050A00 has an unbalanced port impedance of 50Ω and a 50Ω balanced port impedance. This transformation enables single ended signals to be a pplied to differential ports on the data converter devices. The output ports have equal amplitude (h3dB) with 180 degree phase differential. The BD0205F5050A00 is av ailable on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25 °° °°C) Parameter Min. Typ. Max Unit Frequency 200 500 MHz Unbalanced Port Impedance 50 Ω Balanced Port Impedance 50 Ω Return Loss 11 13 dB Insertion Loss* 0.9 1.1 dB Amplitude Balance 0.2 0.6 dB Phase Balance 1 3 Degrees CMRR 36 dB Power Handling 2 Watts Features:

  • 200 – 500 MHz
  • 0.74 mm Height Profile
  • 50 Ohm to 2 x 25 Ohm
  • Excellent CMRR
  • Input to Output DC Isolation
  • Surface Mountable
  • Tape & Reel
  • Non–conductive Surface
  • RoHS Compliant
  • Cascadable
  • Configurable as UnUn Transformer Operating Temperature h55 +85 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing

USA/Canada: Toll Free: Europe: (315) 432h8909 (800) 411h6596 +44 2392h232392 Available on Tape and Reel for Pick and Place Manufacturing. Mod el BD0205F50 50 A00 Rev. A Typical Broadband Performance: 0 – 8.0 GHz. Return Loss – Input h36 h33 h30 h27 h24 h21 h18 h15 h12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB] Insertion Loss h36 h33 h30 h27 h24 h21 h18 h15 h12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB] Amplitude Balance h1.5 h0.5 0.5 1.5 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB] Phase Balance h20 h15 h10 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] deg CMRR h36 h33 h30 h27 h24 h21 h18 h15 h12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB]

Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432h8909 (800) 411h6596 +44 2392h232392 Model BD0205 F50 50 A00 Rev A Typical Performance: 100 MHz. to 600 MHz. Return Loss – Input h36 h33 h30 h27 h24 h21 h18 h15 h12 100 150 200 250 300 350 400 450 500 550 600 Frequency [MHz] [dB] Insertion Loss h3.6 h3.3 h2.7 h2.4 h2.1 h1.8 h1.5 h1.2 h0.9 h0.6 h0.3 100 150 200 250 300 350 400 450 500 550 600 Frequency [MHz] [dB] Amplitude Balance h1.5 h0.5 0.5 1.5 100 150 200 250 300 350 400 450 500 550 600 Frequency [MHz] [dB] Phase Balance h20 h15 h10 100 150 200 250 300 350 400 450 500 550 600 Frequency [MHz] deg CMRR h72 h66 h60 h54 h48 h42 h36 h30 h24 h18 h12 100 200 300 400 500 600 Frequency [MHz] [dB]

USA/Canada: Toll Free: Europe: (315) 432h8909 (800) 411h6596 +44 2392h232392 Available on Tape and Reel for Pick and Place Manufacturing. Mod el BD0205F50 50 A00 Rev. A Mounting Configuration: In order for Xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VS WR may not meet published specifications. All of the Xinger components are constructed from c eramic filled PTFE composites which possess excelle nt electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ oC. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DChbiased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. If desired, DC biasing through the part may be accomplished by the addition of an inductor on Pin #7. Pins #6 and #8 are DC connected to Pin #7. The inductor should be of sufficient value to provide RF isolation on Pin #7. No DC Bias With DC Bias