BAW004E BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
BAW M12MM-UAC70G-BP00,2-GS04 Order Code: BAW004E Internet www.balluff.com eCl@ss 9.1: 27-27-08-02 Subject to change without notice: 285580 ETIM 6.0: EC001818 BAW004E_0.63_2023-12-21 Basic features Approval/Conformity CE UKCA cULus WEEE Basic standard IEC 60947-5-2 IEC 60947-5-7 Display/Operation Function indicator Adjustment indicator Power indicator no Electrical connection Cable diameter D 4.60 mm Cable length L 0.2 m Connection M12x1-Male, 4-pin, A-coded Connection type Cable with connector, 0.20 m, PUR Polarity reversal protected yes Protection against device mix-ups yes Short-circuit protection yes Electrical data Limit frequency –3 dB 1000 Hz Load resistance RL min. 2000 Ohm No-load current Io max. at Ue 15 mA Operating voltage Ub 15...30 VDC Protection class II Rated insulation voltage Ui 250 V AC Rated operating voltage Ue DC 24 V Ripple max. (% of Ue) 15 % Slope U 1.47 V/mm Environmental conditions Ambient temperature -40...80 °C Contamination scale 3 EN 60068-2-27, Shock Half-sinus, 30 g , 11 ms EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min IP rating IP68 Functional safety MTTF (40 °C) 550 a Interface Analog output Analog, voltage 0...10 V Output characteristic falling on approach Output voltage at SI max. 10 V Output voltage at SI min. 0 V Output voltage at Se 5 V Material Housing material Brass, Nickel-free coated Material jacket PUR Material sensing surface LCP Mechanical data Dimension Ø 12 x 63 mm Installation non-flush Size M12x1 Tightening torque 10 Nm n
BAW M12MM-UAC70G-BP00,2-GS04 Order Code: BAW004E Internet www.balluff.com eCl@ss 9.1: 27-27-08-02 Subject to change without notice: 285580 ETIM 6.0: EC001818 BAW004E_0.63_2023-12-21 Range/Distance Linearity range Sl 0.2...7 mm Measuring range 0.2...7 mm Non-linearity max. ±70 µm Repeat accuracy per BWN ±7 µm Temperature drift max. from end value ±8.0 % Remarks Values referenced to axial approach of St 37 target. For other materials correction factors are applied. We recommend to connect the teach line to the negative lead (L-) when not in use. At temperatures below -25˚C the cable must be fixed in place. The working range can be taught using the Teach line or the BAE PD-AW-009-S04 programmer (order code BAE00MN). Scattering (e.g. due to manufacturing tolerances) is described by the tolerance T at Se. This can be approximated using the formula: T = (slmax + slmin) / 20 = ± xx mm. UL-MARKINGS: - For use in NFPA 79 Applications only - Adapters providing field wiring means are available from the manufacturer. Refer to manufacturers information. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. Connector Drawings Wiring Diagrams
BAW M12MM-UAC70G-BP00,2-GS04 Order Code: BAW004E Internet www.balluff.com eCl@ss 9.1: 27-27-08-02 Subject to change without notice: 285580 ETIM 6.0: EC001818 BAW004E_0.63_2023-12-21 Technical Drawings 1) Standard characteristic curve 2) Reduced measuring range 3) Minimum width Sl/3