BAW0026 BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Order Code: BAW0026 Internet www.balluff.com eCl@ss 9.1: 27-27-08-02 Subject to change without notice: 278068 ETIM 6.0: EC001818 BAW0026_0.7_2023-12-20 Basic features Approval/Conformity CE UKCA cULus WEEE Basic standard IEC 60947-5-2 IEC 60947-5-7 Display/Operation Function indicator Adjustment indicator Power indicator no Electrical connection Connection M12x1-Male, 4-pin, A-coded Polarity reversal protected yes Protection against device mix-ups no Short-circuit protection yes Electrical data Limit frequency –3 dB 500 Hz Load resistance RL min. 2000 Ohm Load resistance RT min. 2000 Ohm No-load current Io max. at Ue 10 mA Rated insulation voltage Ui 75 V DC Rated operating voltage Ue DC 24 V Ripple max. (% of Ue) 10 % Slope U 2.50 V/mm Temperature output -9 mV/°C Environmental conditions Ambient temperature -10...70 °C Contamination scale 3 EN 60068-2-27, Shock Half-sinus, 30 g , 11 ms EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min IP rating IP67 Functional safety MTTF (40 °C) 640 a Interface Analog output Analog, voltage 0…10 V Analog, temperature Output characteristic falling on approach Output voltage at SI max. 10 V Output voltage at SI min. 0 V Output voltage at Se 5 V Material Housing material Brass, nickel-plated Material sensing surface PBT Mechanical data Dimension Ø 18 x 44.5 mm Installation for flush mounting Size M18x1 Tightening torque 25 Nm n
Order Code: BAW0026 Internet www.balluff.com eCl@ss 9.1: 27-27-08-02 Subject to change without notice: 278068 ETIM 6.0: EC001818 BAW0026_0.7_2023-12-20 Range/Distance Linearity range Sl 1...5 mm Measuring range 1...5 mm Non-linearity max. ±120 µm Repeat accuracy per BWN ±8 µm Temperature drift max. from end value ±5.0 % Remarks With connector, e.g. BKS-S 20-… total length = switch length +18 mm. When used in Balluff clamping holders, Ua may be reduced by max. 10% Values referenced to axial approach of St 37 target. For other materials correction factors are applied. Scattering (e.g. due to manufacturing tolerances) is described by the tolerance T at Se. This can be approximated using the formula: T = (slmax + slmin) / 20 = ± xx mm. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. Connector Drawings Wiring Diagrams
Order Code: BAW0026 Internet www.balluff.com eCl@ss 9.1: 27-27-08-02 Subject to change without notice: 278068 ETIM 6.0: EC001818 BAW0026_0.7_2023-12-20 Technical Drawings