BAT54_11 UTC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
UNISONIC TECHNOLOGIES CO., LTD BAT54 DIODE www.unisonic.com.tw 1 of 3 Copyright © 2011 Unisonic Technologies Co., Ltd QW-R601-007,G SCHOTTKY BARRIER DIODE DESCRIPTION Planar Schottky barrier diodes are encapsulated in the SOT-23 small plastic SMD package. Single diodes and dual diodes with different pin configuration are available. FEATURES * Low forward voltage * Guard ring protected * Small plastic SMD package SYMBOL n.c ORDERING INFORMATION Ordering Number Package Pin Assignment Packing Lead Free Halogen Free 1 2 3 BAT54L-AE3-R BAT54G-AE3-R SOT-23 x A K Tape Reel Note: Pin Assignment: A: Anode K: Cathode MARKING
UNISONIC TECHNOLOGIES CO., LTD 2 of 3 www.unisonic.com.tw Q W - R 6 0 1 - 0 0 7 , G ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT PER DIODE Continuous Reverse Voltage V R 30 V Continuous Forward Current I F 200 mA Repetitive Peak Forward Current (tP <1s, δ≤0.5) I FRM 300 mA Non-repetitive Peak Forward Current (tP <10ms) I FSM 600 mA Junction Temperature T J +125 °C Storage Temperature T STG -60 ~ +150 °C PER DEVICE Power Dissipation (TA≤25°C) P D 230 mW Note: Absolute maximum ratings are those values be yond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL RATINGS UNIT Junction to Ambient θJA 500 °C/W ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified.) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Forward Voltage (See Fig.1) VF IF = 0.1mA 240 mV IF = 1mA 320 mV IF = 10mA 400 mV IF = 30mA 500 mV IF = 100mA 800 mV Reverse Current (See Fig.2) I R V R = 25V 2 μA Reverse Recovery Time (see Fig.4) t rr When switched from IF =10mA to IR = 10mA, RL = 100Ω measured at IR = 1mA 5 ns Diode Capacitance (see Fig.3) C D f = 1 MHz, V R = 1V 10 pF
UNISONIC TECHNOLOGIES CO., LTD 3 of 3 www.unisonic.com.tw Q W - R 6 0 1 - 0 0 7 , G TYPICAL CHARACTERISTICS IF (mA) IR (μA) CD (pF) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.