BAT54 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Page <1> V1.011/09/19 200mW 30V Schottky Barrier Diode Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Features:
- Low forward voltage
- Fast switching speed
- Surface device type mounting.
- Moisture sensitivity level 1
- Matte Tin (Sn) lead finish with Nickel (Ni) underplate Characteristic Symbol Rating Units Continuous Reverse Voltage Vr 30 V Forward Continuous Current If 200 mA Non-Repetitive Peak Forward Current t<1s Ifsm 0.6 A Total Power Dissipation @ Ta = 25°C Pd 200 mW Storage Temperature Range Tstg -55 to +150 °C Operating Junction Temperature Range Tj -55 to +150 °C Soldering Temperature During 10s Tj 260 °C Characteristic Symbol Max. Units Forward Voltage (2) If = 0.1mA If = 1mA If = 10mA If = 30mA If = 100mA Vf 240 320 400 500 1000 mV Reverse Current (Vr = 25V) Capacitance (Measured at 1MHz, Vr = 1V) Ir Cj μA pF Reverse Recovery Time (If = Ir = 10mA; I(REC) = 1mA) trr 5 nS Maximum Ratings and Electrical Characteristics Rating at 25°C Ambient Temperature Unless Otherwise Specified. Connection Diagram BAT54+ BAT54A+ BAT54C+ BAT54S+ + +
Page <2> V1.011/09/19 200mW 30V Schottky Barrier Diode Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro
Page <3> V1.011/09/19 200mW 30V Schottky Barrier Diode Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Marking Type Part Number 200mW, 30V Schottky Barrier Diode, SOT-23 KL1 (L4) Single BAT54+ KL2 (L42) Dual BAT54A+ KL3 (L42) BAT54C+ KL4 (L42) BAT54S+ SOT-23 Dim. Min. Max. A 2.8 3.04 B 2.1 2.64 C 1.2 1.4 D 0.89 1.03 E 1.78 2.05 F 0.45 0.6 G 0.013 0.1 H 0.89 1.12 J 0.085 0.18 K 0.37 0.51 Dimensions : Millimetres Dimension: Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.