BAT41_V01 STM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 11
Technical content
Features
- Low leakage current losses
- Negligible switching losses
- Low forward and reverse recovery times
- Extremely fast switching
- Surface mount device
- Low capacitance diode
- ECOPACK2 compliant
Applications
- General Rectification
- Reverse polarity protection
- Voltage clamping
- High-speed switching
Description
The BAT41 series uses 100 V Schottky barrier diodes packaged in SOD-123 or SOD-523. This series is specially suited for switching mode with low IR losses. Product status link BAT41 Product summary IF 200 mA VRRM 100 V Tj (max.) 150 °C C (typ.) 3 pF Low capacitance small signal Schottky diodes BAT41 Datasheet DS4884 - Rev 3 - September 2021 For further information contact your local STMicroelectronics sales office.
1 Characteristics
Table 1. Absolute ratings (limiting values at 25 °C, unless otherwise specified) Table 2. Thermal resistance parameter
- Epoxy printed circuit board with recommended pad layout
- AN5088: Rectifiers thermal management, handling and mounting recommendations
Table 3. Static electrical characteristics Table 4. Dynamic characteristics
1.1 Characteristics (curves)
Figure 1. Average forward power dissipation versus Figure 2. Average forward current versus ambient Figure 3. Reverse leakage current versus reverse voltage Figure 4. Reverse leakage current versus junction Figure 5. Junction capacitance versus reverse voltage Figure 6. Forward voltage drop versus forward current
Figure 7. Forward voltage drop versus forward current (typical values)
2 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
2.1 SOD123 package information
Figure 8. SOD123 package outline
Package information
Table 5. SOD123 package mechanical data
- Values in inches are converted from mm and rounded to 3 decimal digits
Figure 9. SOD123 footprint in mm
2.2 SOD523 package information
Figure 10. SOD523 package outline Table 6. SOD523 package mechanical data
- Values in inches are converted from mm and rounded to 3 decimal digits
Figure 11. SOD523 footprint in mm
3 Ordering information
Figure 12. Ordering information scheme Table 7. Ordering information
Ordering Information
Revision history
Table 8. Document revision history 08-Aug-2006 1 Initial release. 12-Oct-2009 2 Updated Table 8 quote “L1” from 0.10 to 0.05. Minor text changes to improve readability.