BASH16MX2W ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Features
- 175°C TJ(max) − Rated for High Temperature, Mission Critical
Applications
- Wettable Flank Package for optimal Automated Optical Inspection (AOI)
- NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
- These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS Rating Symbol Value Unit Continuous Reverse Voltage BASH16 BASH19 BASH20 BASH21 VR, VRRM 100 120 200 250 Vdc Continuous Forward Current IF 200 mAdc Repetitive Peak Forward Current (Pulse Wave = 1 sec, Duty Cycle = 66%) IFRM 500 mA Non−Repetitive Peak Forward Current (Square Wave, TJ = 25°C prior to surge) BASH16 t = 1 /C0109s t = 1 ms t = 1 s BASH19/20/21 t = 1 /C0109s t = 1 ms t = 1 s IFSM 5.0 2.0 0.5 9.0 3.0 1.7 A THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation FR−5 Board TA = 25°C (Note 1) PD 300 mW Thermal Resistance Junction−to−Ambient (Note 1) R/C0113JA 400 °C/W Thermal Resistance Junction−to−Solder Point (Note 1) R/C0113JSP 105 °C/W Junction and Storage Temperature Range TJ, Tstg −55 to +175 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Mounted onto a 4 in square FR−4 board 10 mm sq. 1 oz. Cu 0.06″ thick single sided. Operating to steady state. See detailed ordering, marking and shipping information on page 4 of this data sheet.
ORDERING INFORMATION
XX = Specific Device Code M = Date Code
performance may not be indicated by the Electrical Characteristics if operated under different conditions. Notes: 1. A 2.0 k/C0087 variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Figure 1. Recovery Time Equivalent Test Circuit
www.onsemi.com DEVICE ORDERING INFORMATION Device Marking Package Shipping† BASH16MX2WT5G, NSVBASH16MX2WT5G* MF X2DFN2 (Pb−Free) 8000 / Tape & Reel BASH19MX2WT5G, NSVBASH19MX2WT5G* ME BASH20MX2WT5G, NSVBASH20MX2WT5G* MG BASH21MX2WT5G, NSVBASH21MX2WT5G* MH †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable.
X2DFNW2 1.0x0.6, 0.65P CASE 711BG ISSUE C DATE 13 SEP 2019SCALE 8:1 GENERIC MARKING DIAGRAM* *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G”, may or not be present. Some products may not follow the Generic Marking. XX = Specific Device Code M = Date Code XXM MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON15241GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1X2DFNW2 1.0X0.6, 0.65P © Semiconductor Components Industries, LLC, 2019 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales