BAS70-00-G VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

www.vishay.com Vishay Semiconductors Rev. 1.0, 25-Feb-13 1 Document Number: 85157 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Small Signal Schottky Diodes, Single and Dual

FEATURES

  • These diodes feature very low turn-on voltage and fast switching
  • These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges
  • AEC-Q101 qualified
  • Base P/N-G3 - green, commercial grade
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: SOT-23 Weight: approx. 8.1 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box Note (1) Device on fiberglass substrate, see layout on next page. Note (1) Device on fiberglass substrate, see layout on next page. Top View Top View BAS70-00-G BAS70-05-G BAS70-04-G BAS70-06-G 1 2 2 2 PARTS TABLE PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS BAS70-00-G BAS70-00-G3-08 or BAS70-00-G3-18 Single diode 73G Tape and reel BAS70-04-G BAS70-04-G3-08 or BAS70-04-G3-18 Dual diodes serial 74G Tape and reel BAS70-05-G BAS70-05-G3-08 or BAS70-05-G3-18 Dual di odes common cathode 75G Tape and reel BAS70-06-G BAS70-06-G3-08 or BAS70-06-G3-18 Dual di odes common anode 76G Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Repetitive peak reverse voltage V RRM = VRRM = VR 70 V Forward continuous current (1) IF 200 mA Surge forward current (1) tp < 1 s I FSM 600 mA Power dissipation (1) Ptot 200 mW THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Thermal resistance junction to ambient air (1) RthJA 500 K/W Junction temperature T j 125 °C Storage temperature range T stg - 65 to + 150 °C Operating temperature range T op - 55 to + 125 °C

www.vishay.com Vishay Semiconductors Rev. 1.0, 25-Feb-13 2 Document Number: 85157 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Pulse test; tp  300 μs LAYOUT FOR RthJA TEST Thickness: Fiberglass 1.5 mm (0.059") Copper leads 0.3 mm (0.012") PACKAGE DIMENSIONS in millimeters (inches): SOT-23 ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Reserve beakdown voltage I R = 10 μA (pulsed) V (BR) 70 V Leakage current V R = 50 V I R 20 100 nA Forward voltage I F = 1.0 mA V F 410 mV Forward voltage (1) IF = 15 mA V F 1000 mV Diode capacitance V R = 0 V, f = 1 MHz C D 1.5 2 pF Reserve recovery time IF = IR = 10 mA, iR = 1 mA, RL = 100  trr 5n s 17451 15 (0.59) 12 (0.47) 0.8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0.8) 2 (0.8) 1.5 (0.06) 5.1 (0.2) Foot print recommendation: Rev. 8 - Date: 23.Sept.2009 17418 Document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.7 (0.028) 0.9 (0.035) 0° to 8° 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)

www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BAS70-06-G3-08 BAS70-05-G3-18 BAS70-04-G3-18 BAS70-05-G3-08 BAS70-00-G3-18 BAS70-04-G3-08 BAS70-00-G3-08 BAS70-06-G3-18