BAS19-G VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors Rev. 1.1, 15-May-13 1 Document Number: 83390 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Small Signal Switching Diodes, High Voltage MECHANICAL DATA Case: SOT-23 Weight: approx. 8.1 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box

FEATURES

  • Silicon epitaxial planar diode
  • Fast switching diode in case SOT-23, especially suited for automatic insertion
  • General purpose switching applications
  • High conductance
  • AEC-Q101 qualified
  • Base P/N-G3 - green, commercial grade
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Notes (1) Measured under pulse conditions; pulse time = tp  0.3 ms (2) Device on fiberglass substrate, see layout on next page PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE TYPE MARKING INTERNAL CONSTRUCTION REMARKS BAS19-G V R = 100 V BAS19-G3-08 or BAS19-G3-18 A8G Single diode Tape and reel BAS20-G V R = 150 V BAS20-G3-08 or BAS20-G3-18 A9G Single diode Tape and reel BAS21-G V R = 200 V BAS21-G3-08 or BAS21-G3-18 AAG Single diode Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT Continuous reverse voltage BAS19-G V R 100 V BAS20-G V R 150 V BAS21-G V R 200 V Repetitive peak reverse voltage BAS19-G V RRM 120 V BAS20-G V RRM 200 V BAS21-G V RRM 250 V Non-repetitive peak forward current t = 1 μs IFSM 2.5 ANon-repetitive peak forward surge current t = 1 s 0.5 Maximum average forward rectified current (1) (av. over any 20 ms period) I F(AV) 200 mA DC forward current (2) IF 200 mA Repetitive peak forward current I FRM 625 mA Power dissipation (2) Ptot 250 mW

BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors Rev. 1.1, 15-May-13 2 Document Number: 83390 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Device on fiberglass substrate, see layout drawing below Layout for RthJA test Thickness: Fiberglass 1.5 mm (0.059 in.) Copper leads 0.3 mm (0.012 in.) THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Thermal resistance junction to ambient air (1) RthJA 430 K/W Junction temperature T j 150 °C Storage temperature range T stg - 65 to + 150 °C Operating temperature range T op - 55 to + 150 °C ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION P ART SYMBOL MIN. TYP. MAX. UNIT Forward voltage IF = 100 mA V F 1.0 V IF = 200 mA V F 1.25 V Leakage current VR = 100 V BAS19-G I R 100 nA VR = 150 V BAS20-G I R 100 nA VR = 200 V BAS21-G I R 100 nA VR = VRmax., TJ = 150 °C I R 100 μA Dynamic forward resistance I F = 10 mA r f 5  Diode capacitance V R = 0, f = 1 MHz C D 5p F Reverse recovery time IF = IR = 30 mA, RL = 100 , iR = 3 mA trr 50 ns 17451 15 (0.59) 12 (0.47) 0.8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0.8) 2 (0.8) 1.5 (0.06) 5.1 (0.2)

BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors Rev. 1.1, 15-May-13 3 Document Number: 83390 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE DIMENSIONS in millimeters (inches): SOT-23 Foot print recommendation: Rev. 8 - Date: 23.Sept.2009 17418 Document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.7 (0.028) 0.9 (0.035) 0° to 8° 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)

www.vishay.com Vishay Revision: 13-Jun-16 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.