BAROVUE10 CAMPBELL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
=] SCIENTIFIC NS WHEN MEASUREMENTS MATTER Overview The BaroVUE™10 is a highly accurate barometer that can measure pressures over a range of 500 to 1100 hPa and can be used in a range of applications that includes meteorology and hydrology. This sensor includes our zero downtime recalibration. Other sensors on the market need to be taken offline and sent back to the manufacturer to be recalibrated, often for weeks at a time, causing a loss in valuable data and time, as well as an additional expense. Benefits and Features ) Highly reliable measurements (multiple cells) ) Direct-to-digital measurements ) Very low noise ) Integrated identification and diagnostics Technical Description The BaroVUE™10 is a low-power, digital barometer (-40 to +60°C) that provides best-in-class accuracy and stability (£0.1 hPa/yr) over the entire pressure and temperature range. It can run continuously and does not require power cycling unlike other products in this category. The digital output is both SDI-12 and RS-232, which reduces noise and measurement uncertainty compared with analog sensors, Specifications -NOTE- These specifications assume the recommended desiccation is For comprehensive details, visit: www.campbellsci.eu/barovue10 BaroVUE10 Digital Barometer Perfect for Environmental and Meteorological
Applications
User friendly, cost effective, and best-in-class accuracy and stability The sensor card for the BaroVUE™10 is pre-calibrated. Replacement sensor cards are also pre-calibrated, requiring only one trip to the field station and no downtime. The design of the BaroVUE™10 allows you to remove and replace your sensor card quickly and easily without either having to disassemble the equipment in the enclosure or having to send the equipment back to the manufacturer. ) Zero downtime/recalibration ) Easy firmware updates ) Cost effective ) SDI-12 device and makes the BaroVUE™10 compatible with all Campbell Scientific SDI-12 devices. Moreover, this barometric pressure sensor can be installed and integrated into many new and existing weather stations. The transducers used in the BaroVUE™10 are direct-to-digital sensors, and no reconversion takes place inside the barometer. used. Pressure Range 500to 1100 hPa
Temperature Range -40° to +60°C Weight 22689 (051b) Supply Voltage 9to28Vdc Accuracy Elevation ~609.6 m (Z,OOQ ft) below sea Calibration Uncertainty +015hPa level (asin a mine) to 4,572 m (15,000 ft) above sea level Uncertainty +03 hPa (at 20°0) Current Consumption 200 pA (sleep mode) Total Uncertainty +05 hPa (at 40° to +60°C) <5 mA (active) Long-Term Stability +0.1 hPa/yr Digital Output SDI-12, RS-232 serial Power Supply Rejection Negligible Pressure Fitting Barbed fitting for 0318 cm Measurement Noise 0.05 hPa (RMS) (0.125in) Resolution 0.1 hPa Dimensions 22x90x102cm (0.87 x3.54 x 402in) a For comprehensive details, visit: www.campbellsci.eu/barovue10 CAMPBELL 80 Hathern Road, Shepshed, LE12 9GX UK | +(0)1509 828888 | sale@campbellsci.couk | www.campbellsci.eu SCIENTIFIC AUSTRALIA | BRAZIL | CANADA | CHINA | COSTA RICA | FRANCE | GERMANY | INDIA | SOUTH AFRICA | SPAIN | THAILAND | UK | USA ©2021 Campbell Scientific, Ltd. | 06/28/2021