BAI-001 ITT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
L
3 BAI-001 SMB / SMC Straight Connectors, Clamp Type for Braided Cable
c S Hh a= [KE S x © CLAMP NUT No.1 GASKET No.2 SLEEVE REAR CONTACT FRONT FRONT fo} WASHER WASHER INSULATOR INSULATOR BODY U LL wal STEP 1 £ str a 1. Slide clamp nut, No.1 washer, gasket and No.2 washer over cable. ° 5,50 2. Trim cable to dimension shown taking care not to nick the braid. °o STEP 2 (216) wn — ‘ 3. Thumb braid out radially at right angles to dielectric. Ot) Ep 4. Asmall chamfer may now be cut on the end of cable dielectric, to assist STEP 3 assembly of sleeve. 5. Slide sleeve over cable dielectric and under braid and outer jacket until the flange of the sleeve is flush against the braid. STEP 5 6. Move No. 2 washer up to braid and trim braid flush with the flange of O the sleeve. o [| [_| I[| a p 7. Trim cable dielectric and center conductor to dimensions shown taking pH} y O 3,50 care not to nick the center conductor. STEP 7 (138) | 8. Tin center conductor (DO NOT OVER TIN). = 9. Slide rear insulator over cable. STEP 9 o60 10. Place a small solder preform made from 0,26 - 0,31 (.010 - .012) dia (28 (098) swg) multi-core sodler in rear of contact. eto dp 11. Push contact on center conductor as far as possible. Heat center conductor and push until the shoulder of the contact is flush against the rear insulator. Do not allow solder to protrude outside spill hole. STEP 11 12. Slide on front insulator flush against rear insulator (if not already T assembled in body). 4 13. Move cl t, No.1 washer and gasket up to No. 2 washer, slid es . Move clamp nut, No.1 washer and gasket up to No. 2 washer, slide on HINA dp front body and tighten clamp nut to required torque: 0,63 - 0,70 Nm (90- STEP 12 100 in. ozs.) Only common cable retention features are shown in detail. Various body configurations can apply. STEP 13 Cannon Dimensions are shown: mm (ech) pesticatons and danse s.bjec to change . an — & ITT Industries www. ittcannon.com 52 Engineered for life