BAE00KJ BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Order Code: BAE00KJ Internet www.balluff.com eCl@ss 9.1: 27-27-01-02 Subject to change without notice: 230063 ETIM 6.0: EC002715 BAE00KJ_1.2_2024-10-17 1) LED Power, 2) LED function indicator, 3) 4x operating keys, 4) LED N.C. function active, 5) 7x seven-segment display, 7) Plug connection sensor, 8) DIN rail mount 35mm, 9) Flap Basic features Approval/Conformity CE UKCA cULus WEEE Basic standard IEC 60947-5-2 Series BAE Display/Operation Adjuster Key (4x) Function indicator yes Power indicator yes Setting Time function on/off Sensitivity (Sn) External teach function Dynamic function Various switching modes Teaching switchpoints Switching or analog Electrical connection Cable diameter D 4.50 mm Cable length L 2 m Conductor cross-section 0.25 mm² Number of conductors 4 Polarity reversal protected yes Protection against device mix-ups yes Short-circuit protection yes Electrical data Load capacitance max. at Ue 0.33 µF Load resistance RL max. (Analog I) 400 ohms Load resistance RL min. (Analog V) 1 kOhm No-load current Io max. at Ue 25 mA Operating voltage Ub 15...30 VDC Rated insulation voltage Ui 75 V DC Rated operating current Ie 50 mA Rated operating voltage Ue DC 24 V Ready delay tv max. 200 ms Residual current Ir max. 10 µA Switching frequency 100 Hz Utilization category DC -13 Voltage drop Ud max. at Ie 2 V Environmental conditions Ambient temperature -10...70 °C IP rating IP40 Functional safety MTTF (40 °C) 252 a Interface Analog output Analog, voltage/Analog, current 0…10 V/4…20 mA Switching output PNP/NPN NO/NC programmable Time function On/off delay time programmable
Order Code: BAE00KJ Internet www.balluff.com eCl@ss 9.1: 27-27-01-02 Subject to change without notice: 230063 ETIM 6.0: EC002715 BAE00KJ_1.2_2024-10-17 Material Cover cap material PA Cover material PBT Housing material PBT Material jacket PUR Mechanical data Dimension 10.5 x 45 x 75.5 mm Mounting part Screw M3 DIN EN-50022 rail 35 mm DIN EN-50045 rail 15 mm Remarks Please observe EMC-conformal cable routing. All measuring and norm vales in the data sheet are referenced to 2 m single-ended cordset. max. load current: 50mA with UL approval, <50 to 100mA possible, but without UL approval The connection to the connector must use a listed cable assembly (CYJV) with a minimum value of 80°C The potentiometer does not have a fixed stop, but can be turned endlessly without destroying anything. If no change in the switching signal is detected, the potentiometer should be turned forwards or backwards until a signal change occurs at the output. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. Wiring Diagrams (Schematic)